Re: F12 installation problem

[Neil]

It seems you use the lvm provied by fc11 defaultly . in fc12 it seems not
work "./dev/md/0_0: No such device" means could not found the /dev/md/....
.Re format the disk and have try ! Good luck!

2009/12/1, Peter J. Stieber <developer(a)toyon.com&gt;:
>  I'm trying to use x86_64 network install CD to load F12 on an ASUS P5Q MB.
>   The machine was successfully running F11.  I tried to upgrade using the
>  network install CD, but I ran into some problem.  I blamed this on the fact
>  I was also using the rpm fusion repository, but I didn't really look into
>  the cause.  I reloaded F12 from scratch, wiping out the original install.  I
>  made it to the reboot prompt, but when I rebooted I was left with...
>
>  Boot has failed, sleeping forever.
>
>  I booted using the rescue CD, mounted the drive, and removed rhgb and quite
>  from the grub.conf file.  The result hinted that a raid device wasn't
>  detected.  The machine only has on SATA drive and it was never setup or used
>  in a raid configuration.  Here's what I see when I try to boot the
>  machine...
>
>  [drm] DAC-10: set mode 1280x1024 1d
>  Console: switching to colour frame buffer device 160x64
>  [drm] nouveau 0000:01:00.0: 0x121B: parsing clock script 0
>  fb0: nouveaufb frame buffer device
>  registered panic notifier
>  [drm] Initialized nouveau 0.0.15 20090420 for 0000:01:00.0 on minor 0
>  dracut: Starting plymouth daemon
>  dracut: Starting plymouth daemon
>  dracut: rd_NO_DM: removing DM RAID activation
>  dracut: rd_NO_DM: removing DM RAID activation
>  dracut: rd_NO_MDIMSM: no MD RAID for imsm/isw raids
>  dracut: rd_NO_MDIMSM: no MD RAID for imsm/isw raids
>  Initializing USB Mass Storage driver...
>  scsi4 : SCSI emulation for USB Mass Storage devices
>  usbcore: registered new interface driver usb-storage
>  USB Mass Storage support registered.
>  md: bind<sda>
>  dracut: Assembling MD RAID arrays
>  dracut: Assembling MD RAID arrays
>  md: linear personality registered for level -1
>  linear: not enough drives present. Aborting'
>  md: pers->run() failed ...
>  dracut: mdadm: failed to start array /dev/md/0_0: No such device
>  dracut: mdadm: failed to start array /dev/md/0_0: No such device
>  scsi 4:0:0:0: CD-ROM PIONEER DVD-RW DVR-105 1.21 PQ: 0 ANSI: 0
>  sr0: scsi3-mmc drive: 32x/32x writer cd/rw xa/form2 cdda tray
>  Uniform CD-ROM driver Revision: 3.20
>  sr 4:0:0:0: Attached scsi generic sg1 type 5
>  dracut: rd-NO_DM: removing DM RAID activation
>  dracut: rd_NO_MDIMSM: no MD RAID for imsm/isw raids
>  dracut: Assembling MD RAID arrays
>  dracut: mdadm: failed to start array /dev/md/0_0: No such device
>
>  Boot has failed, sleeping forever.
>
>  Any ideas?
>  Pete
>
>  --
>  fedora-list mailing list
>  fedora-list(a)redhat.com
>  To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
>  Guidelines:
>  http://fedoraproject.org/wiki/Communicate/MailingListGuidelines
>