Hi. My boot SSD was purchased on May, 2015. It is a Crucial 128GB one. Cockpit is showing me an error of /sys/firmware/efi/efivars 0 free
and smartctl is telling me the following: ==== beginning of SMARTCTL INFO ======= === START OF INFORMATION SECTION === Model Family: Crucial/Micron Client SSDs Device Model: Crucial_CT128MX100SSD1 Serial Number: 15030E6E5A80 LU WWN Device Id: 5 00a075 10e6e5a80 Firmware Version: MU01 User Capacity: 128,035,676,160 bytes [128 GB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: Solid State Device Form Factor: 2.5 inches TRIM Command: Available, deterministic, zeroed Device is: In smartctl database 7.3/5528 ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 6 SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Sat Nov 4 17:38:59 2023 EST SMART support is: Available - device has SMART capability. SMART support is: Enabled
=== START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED
General SMART Values: Offline data collection status: (0x84) Offline data collection activity was suspended by an interrupting command from host. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 130) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 3) minutes. Conveyance self-test routine recommended polling time: ( 3) minutes. SCT capabilities: (0x0035) SCT Status supported. SCT Feature Control supported. SCT Data Table supported.
SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x002f 100 100 000 Pre-fail Always - 31 5 Reallocate_NAND_Blk_Cnt 0x0033 100 100 000 Pre-fail Always - 0 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 74107 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 241 171 Program_Fail_Count 0x0032 100 100 000 Old_age Always - 0 172 Erase_Fail_Count 0x0032 100 100 000 Old_age Always - 0 173 Ave_Block-Erase_Count 0x0032 097 097 000 Old_age Always - 108 174 Unexpect_Power_Loss_Ct 0x0032 100 100 000 Old_age Always - 176 180 Unused_Reserve_NAND_Blk 0x0033 000 000 000 Pre-fail Always - 1036 183 SATA_Interfac_Downshift 0x0032 100 100 000 Old_age Always - 0 184 Error_Correction_Count 0x0032 100 100 000 Old_age Always - 0 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 194 Temperature_Celsius 0x0022 053 049 000 Old_age Always - 47 (Min/Max 22/51) 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 16 197 Current_Pending_ECC_Cnt 0x0032 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x0032 100 100 000 Old_age Always - 0 202 Percent_Lifetime_Remain 0x0031 097 097 000 Pre-fail Offline - 3 206 Write_Error_Rate 0x000e 100 100 000 Old_age Always - 0 210 Success_RAIN_Recov_Cnt 0x0032 100 100 000 Old_age Always - 0 246 Total_LBAs_Written 0x0032 100 100 000 Old_age Always - 23588083829 247 Host_Program_Page_Count 0x0032 100 100 000 Old_age Always - 738387194 248 FTL_Program_Page_Count 0x0032 100 100 000 Old_age Always - 172332261
SMART Error Log Version: 1 No Errors Logged
SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Vendor (0xff) Completed without error 00% 8509 - # 2 Vendor (0xff) Completed without error 00% 8490 - # 3 Vendor (0xff) Completed without error 00% 8385 - # 4 Vendor (0xff) Completed without error 00% 8333 - # 5 Vendor (0xff) Completed without error 00% 8251 - # 6 Vendor (0xff) Completed without error 00% 8146 - # 7 Vendor (0xff) Completed without error 00% 8092 - # 8 Vendor (0xff) Completed without error 00% 7843 - # 9 Vendor (0xff) Completed without error 00% 7765 - #10 Vendor (0xff) Completed without error 00% 7721 - #11 Vendor (0xff) Completed without error 00% 7607 - #12 Vendor (0xff) Completed without error 00% 7571 - #13 Vendor (0xff) Completed without error 00% 7535 - #14 Vendor (0xff) Completed without error 00% 7433 - #15 Vendor (0xff) Completed without error 00% 7193 - #16 Vendor (0xff) Completed without error 00% 7156 - #17 Vendor (0xff) Completed without error 00% 7121 - #18 Vendor (0xff) Completed without error 00% 7086 - #19 Vendor (0xff) Completed without error 00% 7050 - #20 Vendor (0xff) Completed without error 00% 7011 - #21 Vendor (0xff) Completed without error 00% 6971 -
SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Completed [00% left] (56994816-57060351) 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.
The above only provides legacy SMART information - try 'smartctl ======== END OF SMARTCTL ====
Is it time to say good by and replace this disk? Should I get a larger one? It has the boot info and operating system.
Thanks for your insights