On 5/12/21 6:46 PM, Ed Greshko wrote:
On 13/05/2021 04:05, Roger Heflin wrote:
Do an "ip route" on both the source and destination nodes.
also do an "ip neigh" on both.
And an "ip link" on both.
Yes, that would be very helpful if Robert would supply that information. Thanks for making that suggestion
Have to apologize. Cockpit error. The address should have been
192.168.1.211 instead of 192.168.1.112
From the host system
[rm3]RobertPC ~]$ ip route default via 192.168.1.254 dev enp2s0 proto dhcp metric 100 10.237.214.0/24 via 192.168.1.254 dev enp2s0 proto static metric 100 192.168.1.0/24 dev enp2s0 proto kernel scope link src 192.168.1.185 metric 100 [rm3@RobertPC ~]$ ip link 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 2: enp2s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP mode DEFAULT group default qlen 1000 link/ether 00:1d:60:35:b8:13 brd ff:ff:ff:ff:ff:ff [rm3@RobertPC ~]$ ip neigh 192.168.1.254 dev enp2s0 lladdr 8c:5a:25:e4:56:b0 REACHABLE 192.168.1.111 dev enp2s0 FAILED 192.168.1.239 dev enp2s0 lladdr 00:00:c0:33:7b:6f STALE 192.168.1.112 dev enp2s0 FAILED fe80::6038:e0ff:fec2:54a8 dev enp2s0 lladdr 62:38:e0:c2:54:a8 router STALE 2600:1702:4860:9dd0:210:75ff:fe28:5e30 dev enp2s0 lladdr 00:10:75:28:5e:30 STALE fe80::8e5a:25ff:fee4:56b0 dev enp2s0 lladdr 8c:5a:25:e4:56:b0 router REACHABLE fe80::210:75ff:fe28:5e30 dev enp2s0 lladdr 00:10:75:28:5e:30 STALE
from the target system
[rm3@RobertPC ~]# ssh alarm@2600:1702:4860:9dd0:210:75ff:fe28:5e30 alarm@2600:1702:4860:9dd0:210:75ff:fe28:5e30's password: Last login: Wed May 12 15:59:14 2021 from fe80::c466:3bc6:17fa:9268%eth0 [alarm@alarm ~]$ ip route default via 192.168.1.253 dev eth0 proto dhcp src 192.168.1.211 metric 1024 192.168.1.0/24 dev eth0 proto kernel scope link src 192.168.1.211 192.168.1.253 dev eth0 proto dhcp scope link src 192.168.1.211 metric 1024 [alarm@alarm ~]$ ip link 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default qlen 1 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP mode DEFAULT group default qlen 1000 link/ether 00:10:75:28:5e:30 brd ff:ff:ff:ff:ff:ff [alarm@alarm ~]$ ip neigh 192.168.1.253 dev eth0 lladdr 62:38:e0:c2:54:a8 STALE 192.168.1.254 dev eth0 lladdr 8c:5a:25:e4:56:b0 STALE fe80::8e5a:25ff:fee4:56b0 dev eth0 lladdr 8c:5a:25:e4:56:b0 router STALE fe80::1eb5:75df:b84:98d1 dev eth0 lladdr 00:1d:60:35:b8:13 STALE 2600:1702:4860:9dd0:21d:60ff:fe35:b813 dev eth0 lladdr 00:1d:60:35:b8:13 DELAY fe80::6038:e0ff:fec2:54a8 dev eth0 lladdr 62:38:e0:c2:54:a8 router STALE