Jim Cornette escreveu:
> david walcroft wrote:
>
>> Jim Cornette wrote:
>>
>>> david walcroft wrote:
>>>
>>>> Hi,
>>>> I have had a scanning problem since moving up to FC3 from FC2 and
>>>> that is it is not identified by gimp,kooka and so on.
>>>> ptal-init sets it up and :-
>>>>
>>>> [david@reddwarf ~]$ sane-find-scanner
>>>> found USB scanner (vendor=0x03f0 [Hewlett-Packard], product=0x2811
>>>> [PSC 2100 Series]) at libusb:003:003
>>>>
>>>> but :
>>>>
>>>> [david@reddwarf ~]$ scanimage -L
>>>> scanimage: hp-option.c:3710: hp_optset_fix_geometry_options:
>>>> Assertion `tl_x && tl_y && br_x && br_y'
failed.
>>>> Aborted
>>>>
>>>> software is uptodate
>>>> [david@reddwarf ~]$ rpm -q hpoj
>>>> hpoj-0.91-11
>>>> [david@reddwarf ~]$ rpm -qa | grep sane
>>>> sane-frontends-1.0.12-4
>>>> sane-backends-devel-1.0.14-6
>>>> sane-backends-1.0.14-6
>>>> xsane-gimp-0.92-13
>>>> xsane-0.92-13
>>>>
>>>> Any ideas anyone....
>>>>
>>>> Thanks david
>>>>
>>>
>>> Try adding the testing repo to your repositories to get the latest
>>> programs. I have an hp 2100 scanner and it seems to work alright in
>>> FC3.
>>>
>>> I'm not sure what the hpoj has to do with the scanner.
>>>
>>> Jim
>>>
>>> Refer to below bug report for needed packages.
>>>
https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=121511
>>>
>>>
>> Jim
>> I just added my 2c to the bug as updating to updates-testing
>> hasn't worked,hpoj and
>> hpijs together handle print and scan requirements.
>>
>> Thanks david
>>
>
> I have a scanner that is seperate. It is not a scanner printer
> combination. It is an HP 2100C model flatbed scanner and works fine
> with the testing versions of the suggested programs installed.
>
> Since I don't have a combination unit and do not know if there are
> seperate usb device nodes for the scanner and another for the printer
> or if they use the same usb node for each device. It makes more sense
> to me for the devices to have seperate nodes per device. Could it be
> that the node for the scanner portion is not being set to the right
> setting?
>
> sane-backends-1.0.15-1.4
> hotplug-2004_04_01-8.1
> pam-0.77-66.1
>
> Are the program versions that are supposed to get the permissions
> setup correctly? It looks like you have these versions installed from
> the addition to the bug report.
>
> Sorry that this remedy couldn't fix your problem. It sounds like
> hpijs is not being loaded correctly. You might try searching bugzilla
> for multi-function device entries.
>
> Jim
>
Hi,
I've a HP PSC 1315 and I've installed the HPLIP driver
(
http://hpinkjet.sourceforge.net/index.php), so the scanner works fine
with xsane.
Best regards,
Vinicius.
Vinicius,
Do I need to uninstall the 'hpoj,hpijs'rpm's first or just
add hplip.I did see it at hpinkjet but it did'nt
connect that it might be my answer.
Thanks david