Re: Usb scanner problem

[Vinicius]

david walcroft escreveu:
>  Vinicius wrote:
>  
> > Jim Cornette escreveu:
> >
> >> david walcroft wrote:
> >>
> >>> Jim Cornette wrote:
> >>>
> >>>> david walcroft wrote:
> >>>>
> >>>>> Hi,
> >>>>>   I have had a scanning problem since moving up to FC3 from FC2 and
> >>>>> that is it is not identified by gimp,kooka and so on.
> >>>>> ptal-init sets it up and :-
> >>>>>
> >>>>> [david@reddwarf ~]$ sane-find-scanner
> >>>>> found USB scanner (vendor=0x03f0 [Hewlett-Packard], product=0x2811 
> >>>>> [PSC 2100 Series]) at libusb:003:003
> >>>>>
> >>>>> but :
> >>>>>
> >>>>> [david@reddwarf ~]$ scanimage -L
> >>>>> scanimage: hp-option.c:3710: hp_optset_fix_geometry_options: 
> >>>>> Assertion `tl_x && tl_y && br_x && br_y'
> failed.
> >>>>> Aborted
> >>>>>
> >>>>> software is uptodate
> >>>>> [david@reddwarf ~]$ rpm -q hpoj
> >>>>> hpoj-0.91-11
> >>>>> [david@reddwarf ~]$ rpm -qa | grep sane
> >>>>> sane-frontends-1.0.12-4
> >>>>> sane-backends-devel-1.0.14-6
> >>>>> sane-backends-1.0.14-6
> >>>>> xsane-gimp-0.92-13
> >>>>> xsane-0.92-13
> >>>>>
> >>>>> Any ideas anyone....
> >>>>>
> >>>>> Thanks  david
> >>>>>
> >>>>
> >>>> Try adding the testing repo to your repositories to get the latest 
> >>>> programs. I have an hp 2100 scanner and it seems to work alright in 
> >>>> FC3.
> >>>>
> >>>> I'm not sure what the hpoj has to do with the scanner.
> >>>>
> >>>> Jim
> >>>>
> >>>> Refer to below bug report for needed packages.
> >>>> https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=121511
> >>>>
> >>>>
> >>> Jim
> >>>    I just added my 2c to the bug as updating to updates-testing  
> >>> hasn't worked,hpoj and
> >>> hpijs together handle print and scan requirements.
> >>>
> >>>     Thanks  david
> >>>
> >>
> >> I have a scanner that is seperate. It is not a scanner printer 
> >> combination. It is an HP 2100C model flatbed scanner and works fine 
> >> with the testing versions of the suggested programs installed.
> >>
> >> Since I don't have a combination unit and do not know if there are 
> >> seperate usb device nodes for the scanner and another for the printer 
> >> or if they use the same usb node for each device. It makes more sense 
> >> to me for the devices to have seperate nodes per device. Could it be 
> >> that the node for the scanner portion is not being set to the right 
> >> setting?
> >>
> >> sane-backends-1.0.15-1.4
> >> hotplug-2004_04_01-8.1
> >> pam-0.77-66.1
> >>
> >> Are the program versions that are supposed to get the permissions 
> >> setup correctly? It looks like you have these versions installed from 
> >> the addition to the bug report.
> >>
> >> Sorry that this remedy couldn't fix your problem. It sounds like 
> >> hpijs is not being loaded correctly. You might try searching bugzilla 
> >> for multi-function device entries.
> >>
> >> Jim
> >>
> >
> > Hi,
> >
> > I've a HP PSC 1315 and I've installed the HPLIP driver 
> > (http://hpinkjet.sourceforge.net/index.php), so the scanner works fine 
> > with xsane.
> >
> > Best regards,
> > Vinicius.
> >
>  Vinicius,
>              Do I need to uninstall the 'hpoj,hpijs'rpm's first or just 
>  add hplip.I did see it at hpinkjet but it did'nt
>  connect that it might be my answer.
>  
>     Thanks      david
>  
>  
>  
>   
I didn't uninstalled neither, I just compiled the HPLIP driver and 
followed the steps suggested.