Re: (Solved) Did I really install Kmod-Nvidia ?

I got my Nvidia card installed correctly by following these instructions
at rpmfusion:

>  Fedora 10 and 11
>
>  Please remember that once the drivers are installed, they will configure
>  your xorg.conf automatically and changes will take effect after a full
>  reboot. There is no need to run nvidia-xconfig or other tools.
>
>  GeForce 6 and higher (mine is a 9400 GT)
>
>  yum install kmod-nvidia
>
>  Fedora 11 and nouveau
>
>  As nouveau is enabled by default starting with Fedora 11, you may
>  experience problem which is caused by the nouveau kernel module being
>  present in the initrd image. To avoid such problem, after you have
>  installed the right series of the nvidia driver for your hardware, execute
>  the following commands:
>
>  su -
>  mv /boot/initrd-$(uname -r).img /boot/initrd-$(uname -r)-nouveau.img
>  mkinitrd /boot/initrd-$(uname -r).img $(uname -r)
>  reboot
>
>  http://rpmfusion.org/Howto/nVidia
>
>  ----------------------------------
>
>  Before reboot, the following command:
>
>  lsmod | grep nouveau
>
>  has this output (at least for teh 9400 GT card):
>
>  nouveau               472800  0
>  drm                   208060  1 nouveau
>  i2c_algo_bit            6020  1 nouveau
>  i2c_core               22288  5 nvidia,i2c_piix4,nouveau,drm,i2c_algo_bit
>
>  After reboot, there is no output whereas:
>
>  lsmod | grep nvidia
>
>  gives:
>
>  nvidia              10260024  26
>  i2c_core               22240  2 i2c_piix4,nvidia
>
>  The Nvidia driver is installed!