On Thu, Dec 7, 2017 at 11:06 PM, Tim ignored_mailbox@yahoo.com.au wrote:
Allegedly, on or about 7 December 2017, Fulko Hew sent:
To disable the Advanced Power Management and to stop the head unload/clicking I've always used:
hdparm -B 255 /dev/sda
But on this machine/drive, it doesn't seem to work; or at least it only works for a short while, and then it starts unloading again.
Is this "short while" in the middle of an active session, or have you suspended/hibernated/rebooted/powered-down, in the meantime?
No, I've been through all those issues. The system is live, and hasn't even timed-out an turned off the screen.
You may need to look into your power-management settings, and make sure that any wake-up/thaw events reprogram the setting. I had to do that with mine.
I've looked into those, and haven't found anything related.
More importantly, the next time I try to disable it,it says its disabled, but the drive carries on clicking, and the Load_Cycle_Count still keeps going up.
Try a different value, such as 254, instead.
That was the second thing I tried, all to no avail. Its as if the drive ignores whatever hdparm does.
I also just tried (with no success)
hdparm -S 0 /dev/sda