Thank you for the clarifications, Nigel. Here's a list of what I got running the command:
ACPI: RSDP (v002 ACPIAM ) @ 0x00000000000f6cf0 ACPI: XSDT (v001 A M I OEMXSDT 0x06000514 MSFT 0x00000097) @ 0x000000007fff0100 ACPI: FADT (v001 A M I OEMFACP 0x06000514 MSFT 0x00000097) @ 0x000000007fff0281 ACPI: MADT (v001 A M I OEMAPIC 0x06000514 MSFT 0x00000097) @ 0x000000007fff0380 ACPI: OEMB (v001 A M I OEMBIOS 0x06000514 MSFT 0x00000097) @ 0x000000007ffff040 ACPI: HPET (v001 A M I OEMHPET 0x06000514 MSFT 0x00000097) @ 0x000000007fff3990 ACPI: ASF! (v001 AMIASF AMDSTRET 0x00000001 INTL 0x02002026) @ 0x000000007fff39d0 ACPI: DSDT (v001 0AAAA 0AAAA000 0x00000000 INTL 0x02002026) @ 0x0000000000000000 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Using ACPI (MADT) for SMP configuration information ACPI: Core revision 20060707 ACPI: bus type pci registered ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) ACPI: PCI Interrupt Routing Table [_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [_SB_.PCI0.PCI1._PRT] ACPI: PCI Interrupt Routing Table [_SB_.PCI0.P0P2._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) pnp: PnP ACPI init pnp: PnP ACPI: found 14 devices PCI: Using ACPI for IRQ routing ACPI: Processor [CPU1] (supports 8 throttling states) ACPI Exception (acpi_processor-0677): AE_NOT_FOUND, Processor Device is not present [20060707] ACPI Exception (acpi_processor-0677): AE_NOT_FOUND, Processor Device is not present [20060707] ACPI: PCI Interrupt 0000:02:0b.0[A] -> GSI 17 (level, low) -> IRQ 17 ACPI: PCI Interrupt 0000:02:0b.1[B] -> GSI 18 (level, low) -> IRQ 18 ACPI: PCI Interrupt 0000:02:00.0[D] -> GSI 19 (level, low) -> IRQ 19 ACPI: PCI Interrupt 0000:02:00.1[D] -> GSI 19 (level, low) -> IRQ 19 ACPI: PCI Interrupt 0000:02:0b.2[C] -> GSI 19 (level, low) -> IRQ 19 ACPI: PCI Interrupt 0000:02:05.0[A] -> GSI 19 (level, low) -> IRQ 19 ACPI: PCI Interrupt 0000:02:03.0[A] -> GSI 18 (level, low) -> IRQ 18 ACPI: PCI Interrupt 0000:02:07.0[A] -> GSI 19 (level, low) -> IRQ 19 ACPI: PCI Interrupt 0000:02:09.2[B] -> GSI 17 (level, low) -> IRQ 17 ACPI: PCI Interrupt 0000:02:0a.0[A] -> GSI 17 (level, low) -> IRQ 17 ACPI: PCI Interrupt 0000:02:09.0[A] -> GSI 16 (level, low) -> IRQ 16 ACPI: PCI Interrupt 0000:00:07.5[B] -> GSI 17 (level, low) -> IRQ 17 ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16 ACPI: Power Button (FF) [PWRF] ACPI: Power Button (CM) [PWRB]
this problem itself is not a really big deal, the only issue is that I have to be present until the very end of the shutdown sequence, since I can't leave the rig unattended. Oh, well....
On Friday 27 April 2007 22:31, JJ JJ wrote:
Hey Aaron, sorry I saw your message only now. I tried Nigel's tips, and still no
go.
So, at the grub menu I have to digit this line: dmesg |grep ACPI am I correct? I also noticed that at the end, I get this message: acpi: pci interrupt for device 0000:02:03.0 disabled My guess is that if I enable it, this P.O.S. should work, but how do I enable it? Thanks again!! JJ
You run dmesg from the CLI (Konsole/Terminal) once you have booted up. if you just run dmesg from the CLI you get all of the bootup stuff displayed in the terminal. Running dmesg | grep acpi limits the output to what just applies to acpi.
This is a horrible problem, and seems to appear with more recent kernels, and just on some hardware. My original kernel that was installed from the cdroms for FC5 still shutsdown ok, but kernels 2.6.17. and later have this shutdown problem, and in my case on FC5 acpi=force added to the kernel lines in /boot/grub/grub.conf seems to fix the problem.
Hope we can fix this for you, as it's an inconvenience having to push the button to shutdown.
Nigel.
-- fedora-list mailing list fedora-list@redhat.com To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
_________________________________________________________________ Interest Rates NEAR 39yr LOWS! $430,000 Mortgage for $1,299/mo - Calculate new payment http://www.lowermybills.com/lre/index.jsp?sourceid=lmb-9632-19132&moid=1...