Re: Simple Routing using FC2/3
Do you have the external interface set as default gateway device? You're
also going to need NAT if you plan to route through it.
On Sun, 6 Mar 2005, Todd Wohlwend wrote:
This should be a simple task. I need to use a FC2/3 as a router. (I
have
done this in RH7.2 with no problems) Here is my senerio :
Fedora C3 (soon to be router - I hope)
External Interface 172.16.176.152 / 20
Internal Interface 192.168.213.152 / 24
No GW on internal
net.ipv4.ip_forward = 1 set in sysctl.conf file (rebooted of-course)
Internal PC
IP = 192.168.213.253 / 24
GW = 192.168.213.254
I can ping the 192.168.213.254 and 172.16.176.152 from the internal PC, but
not any device in the 172.17.176 network.
This is a full install of FC3. iptables is default. I have even disabled
iptables to test. Still no luck.........I need a simple solution. I do not
want to disable iptables and install another product.....like firestarter or
enable (masquerading) NAT.
There must be a simple solution?
Todd Wohlwend
Computer Information Systems Instructor
Southeast Technical Institute
Todd_Wohlwend(a)hotmail.com or Todd.Wohlwend(a)southeasttech.com