2.6.16-1.2080_FC5smp
gcc (GCC) 4.1.0 20060304 (Red Hat 4.1.0-3)
spca5xx-20060402
Compiles and installs fine. Modprobe spca5xx works fine. Here's the /var/log/messages
output of doing a "modprobe spca5xx":
Apr 16 12:18:39 electron kernel: Linux video capture interface: v1.00
Apr 16 12:18:39 electron kernel: usbcore: registered new driver spca5xx
Apr 16 12:18:39 electron kernel: /root/spca5xx-20060402/drivers/usb/spca5xx.c: spca5xx
driver 00.57.11 registered
Next, I plug in the camera, and /var/log/messages gives:
Apr 16 12:20:33 electron kernel: usb 1-2: new full speed USB device using uhci_hcd and
address 4
Apr 16 12:20:33 electron kernel: usb 1-2: configuration #1 chosen from 1 choice
Apr 16 12:20:33 electron kernel: hub 1-2:1.0: USB hub found
Apr 16 12:20:33 electron kernel: hub 1-2:1.0: 4 ports detected
Apr 16 12:20:34 electron kernel: usb 1-2.4: new full speed USB device using uhci_hcd and
address 5
Apr 16 12:20:34 electron kernel: usb 1-2.4: configuration #1 chosen from 1 choice
Apr 16 12:20:34 electron kernel: /root/spca5xx-20060402/drivers/usb/spca5xx.c: USB SPCA5XX
camera found. Type Creative Live! Zc301+Tas5130c
Apr 16 12:20:34 electron kernel: /root/spca5xx-20060402/drivers/usb/spca5xx.c:
[spca5xx_probe:8301] Camera type JPEG
Apr 16 12:20:35 electron kernel: /root/spca5xx-20060402/drivers/usb/zc3xx.h:
[zc3xx_config:530] Find Sensor HV7131R(c)
Apr 16 12:20:35 electron kernel: /root/spca5xx-20060402/drivers/usb/spca5xx.c:
[spca5xx_getcapability:2198] maxw 640 maxh 480 minw 176 minh 144
But when I run spcaview, it freezes the machine. For obvious reasons I can't
cut-n-paste the screen output. Any ideas?
--
This is an email sent via the webforum on
http://fcp.homelinux.org
http://fcp.homelinux.org/modules/newbb/viewtopic.php?post_id=79306&to...