On Thu, 2005-01-27 at 17:18 +0800, Ow Mun Heng wrote:
Does anyone on either of this list know how to properly configure LIRC esp on a laptop?
Yeah, tricky thanks to the limited lirc documentation.
and also /dev/lirc/0
if I start lircd via
sudo lircd -n -d /dev/lirc/0 on a console and then I start "irw" on another, pressing _any_ buttons on the remote (any remote) doesn't give me any output.
Addition to that, using irrecord also does not work.
You have insmod'ed lirc_sir, have you? Poorly documented, but you'll need the module to have ir-support. It has to be configured properly and -- and that was the tricky part -- the UART has to be prepared. For my laptop this means the following in /etc/modprobe.conf:
# Lirc remote control alias char-major-61 lirc_sir options lirc_sir irq=3 io=0x2f8 install lirc_sir { /bin/setserial /dev/ttyS1 uart none || : ; }; /sbin/modprobe --ignore-install lirc_sir
I guess you know what that means... If no,. ask me.
If I can't get this to work, Mythtv will be of not much use :-(
Yeah, same here, but with freevo instead.
The wiki of freevo gives some more hints about LIRC.
HaJo