Undetected video card on xSeries 206m
Hi everyone!
I have a little problem with FC6 running on an IBM xSeries 206m machine..
I can't get Xorg to detect the integrated video card (Radeon 7000/VE)
using the ati driver, while with FC4 and 5 everything was ok..
The fbdev driver works though, but it's a bit slow.
lspci output:
---
00:00.0 Host bridge: Intel Corporation 82875P/E7210 Memory Controller
Hub (rev 02)
00:03.0 PCI bridge: Intel Corporation 82875P/E7210 Processor to PCI to
CSA Bridge (rev 02)
00:1c.0 PCI bridge: Intel Corporation 6300ESB 64-bit PCI-X Bridge (rev 02)
00:1d.0 USB Controller: Intel Corporation 6300ESB USB Universal Host
Controller (rev 02)
00:1d.1 USB Controller: Intel Corporation 6300ESB USB Universal Host
Controller (rev 02)
00:1d.4 System peripheral: Intel Corporation 6300ESB Watchdog Timer (rev 02)
00:1d.5 PIC: Intel Corporation 6300ESB I/O Advanced Programmable
Interrupt Controller (rev 02)
00:1d.7 USB Controller: Intel Corporation 6300ESB USB2 Enhanced Host
Controller (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 0a)
00:1f.0 ISA bridge: Intel Corporation 6300ESB LPC Interface Controller
(rev 02)
00:1f.1 IDE interface: Intel Corporation 6300ESB PATA Storage Controller
(rev 02)
00:1f.2 RAID bus controller: Intel Corporation 6300ESB SATA RAID
Controller (rev 02)
00:1f.3 SMBus: Intel Corporation 6300ESB SMBus Controller (rev 02)
02:01.0 Ethernet controller: Intel Corporation 82547GI Gigabit Ethernet
Controller
04:02.0 VGA compatible controller: ATI Technologies Inc Radeon RV100 QY
[Radeon 7000/VE]
---
Xorg log with ati driver (relevant parts, I hope :) ):
---
X Window System Version 7.1.1
(...)
Current Operating System: Linux Havens.ibc.it 2.6.18-1.2798.fc6 #1 SMP
(...)
Build ID: xorg-x11-server 1.1.1-47.fc6
(...)
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 8086,2578 card 1014,02ae rev 02 class 06,00,00
hdr 00
(II) PCI: 00:03:0: chip 8086,257b card 0000,0000 rev 02 class 06,04,00
hdr 01
(II) PCI: 00:06:0: chip 8086,257e card 0000,0000 rev 02 class 08,80,00
hdr 00
(II) PCI: 00:1c:0: chip 8086,25ae card 0000,0000 rev 02 class 06,04,00
hdr 01
(II) PCI: 00:1d:0: chip 8086,25a9 card 1014,02ad rev 02 class 0c,03,00
hdr 80
(II) PCI: 00:1d:1: chip 8086,25aa card 1014,02ad rev 02 class 0c,03,00
hdr 00
(II) PCI: 00:1d:4: chip 8086,25ab card 1014,02ad rev 02 class 08,80,00
hdr 00
(II) PCI: 00:1d:5: chip 8086,25ac card 1014,02ad rev 02 class 08,00,20
hdr 00
(II) PCI: 00:1d:7: chip 8086,25ad card 1014,02ad rev 02 class 0c,03,20
hdr 00
(II) PCI: 00:1e:0: chip 8086,244e card 0000,0000 rev 0a class 06,04,00
hdr 01
(II) PCI: 00:1f:0: chip 8086,25a1 card 0000,0000 rev 02 class 06,01,00
hdr 80
(II) PCI: 00:1f:1: chip 8086,25a2 card 1014,02ad rev 02 class 01,01,8a
hdr 00
(II) PCI: 00:1f:2: chip 8086,25b0 card 1014,02ad rev 02 class 01,04,8f
hdr 00
(II) PCI: 00:1f:3: chip 8086,25a4 card 1014,02ad rev 02 class 0c,05,00
hdr 00
(II) PCI: 02:01:0: chip 8086,1075 card 1014,02ad rev 00 class 02,00,00
hdr 00
(II) PCI: End of PCI scan
(II) Intel Bridge workaround enabled
(...)
(II) Primary Device is: ISA
(II) ATI: Candidate "Device" section "Videocard0".
(EE) No devices detected.
Fatal server error:
no screens found
---
Looking at the PCI scan, it seems like Xorg misses the device
completely.. My xorg.conf Device section:
---
Section "Device"
Identifier "Videocard0"
Driver "ati"
VendorName "Videocard vendor"
BoardName "ATI Radeon 7000"
Option "NoAccel"
EndSection
---
I tried to install a new video card (ATI RageXL), but it doesn't detect
it either.. What could be wrong?
Many thanks for your attention, please ask if you need more information!