RE: How to add a network adaptor?

[David Aldrich]

Hi Rami
> eno1 was not loaded (though it should have).
> If this is the case, you can load the driver manually.

How would I do that please?
> And more important: what does ethtool -i eno1 show (when the original card is
> inserted, before  adding the HP card)?

With the new card removed, so just the onboard adaptor is present, ifconfig -a just finds:

lo
vibr0
vibr0-nic

and ethtool -i eno1 shows:

"Cannot get driver information: no such device"

Best regards

David
> -----Original Message-----
> From: Rami Rosen [mailto:[e-mail]]
> Sent: 21 June 2016 17:51
> To: Community support for Fedora users 
> Subject: Re: How to add a network adaptor?
>
> Hi, David,
>
> It seems as if somehow, after inserting the HP card and rebooting, the network
> driver of
> eno1 was not loaded (though it should have).
> If this is the case, you can load the driver manually.
>
> What does ethtool -i enpls0f0 and enpls0f1 show ?
>
> And more important: what does ethtool -i eno1 show (when the original card is
> inserted, before  adding the HP card)?
>
> Regards,
> Rami Rosen
>
> On 21 June 2016 at 19:26, David Aldrich 
> wrote:
> > Thanks for your reply.
> > > Does it show up still in lspci?  If not, then check your BIOS settings.
> >
> > An Intel I217-V Ethernet Controller does show in lspci.
> > > If yes, then check "journalctl -b" to see there's any clue.
> >
> > I can't see anything relevant in the journal but it is like looking for a needle in
>
> a haystack.
> > > -----Original Message-----
> > > From: Samuel Sieb [mailto:[e-mail]]
> > > Sent: 21 June 2016 17:01
> > > To: Community support for Fedora users
> > >
> > > Subject: Re: How to add a network adaptor?
> > >
> > > On 06/21/2016 07:33 AM, David Aldrich wrote:
> > > > I have a machine running Fedora 22. The motherboard provides an
> > > > Ethernet
> > >
> > > network adaptor, which I connect to our office network. I want to add
> > > an HP Ethernet 10Gb 2-port 560SFP+ adapter to support a local subnet,
> > > but retain the original motherboard adaptor and connection to the office
>
> network.
> > > > Before adding the 560SFP+ card, ifconfig -a reports:
> > > >
> > > > $ ifconfig -a
> > > > eno1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
> > > >       inet 172.29.68.172  netmask 255.255.255.0  broadcast
> > > > 172.29.68.255
> > > >
> > > > but after inserting the new card, that command reports new entries:
> > > > enpls0f0
> > >
> > > and enpls0f1, but eno1 has gone.
> > > > How can I recover eno1?
> > >
> > > Does it show up still in lspci?  If not, then check your BIOS settings.
> > > If yes, then check "journalctl -b" to see there's any clue.
> > > --
> > > users mailing list
> > > [e-mail]
> > > To unsubscribe or change subscription options:
> > > https://lists.fedoraproject.org/admin/lists/[e-mail]
> > > .org Fedora Code of Conduct: http://fedoraproject.org/code-of-conduct
> > > Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines
> > > Have a question? Ask away: http://ask.fedoraproject.org
> > >
> > > Click
>
> https://www.mailcontrol.com/sr/TryHA7xqhljGX2PQPOmvUr11KAWLA5a3L!Q4
> > > bRnvl2ge!rrbhImD9AJvkcUjmqsbiSeldytgUZ!4eW8epClCcw==  to report this
> > > email as spam.
> >
> > --
> > users mailing list
> > [e-mail]
> > To unsubscribe or change subscription options:
> > https://lists.fedoraproject.org/admin/lists/[e-mail].
> > org Fedora Code of Conduct: http://fedoraproject.org/code-of-conduct
> > Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines
> > Have a question? Ask away: http://ask.fedoraproject.org
>
> --
> users mailing list
> [e-mail]
> To unsubscribe or change subscription options:
> https://lists.fedoraproject.org/admin/lists/[e-mail]
> Fedora Code of Conduct: http://fedoraproject.org/code-of-conduct
> Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines
> Have a question? Ask away: http://ask.fedoraproject.org