On Mon, 2004-08-30 at 22:37, Gregory Gulik wrote:
C. Linus Hicks wrote:
> It doesn't look like an issue since the driver is detecting the transfer
> rate of 5mb/s, but you could try setting that rate in the SCSI adapter
> for that SCSI ID. Also, you might want to see if you can get this tape
> drive working on another system.
I tried setting the transfer rate to 5mb/s in the BIOS. No dice.
However I did notice the following error in dmesg after I tried to
access the device with mt:
st0: try direct i/o: yes (alignment 512 B), max page reachable by HBA
1048575
I don't think that is an error. I have seen it in every log listing you
have posted.
> For someone who avoids SCSI, you sure do have a lot of SCSI
controllers
> in this machine.
The only real device is this Adaptec card. The rest are a 6-in-1 USB
card reader and a large IDE drive in a USB enclosure as a backup device.
Ah! So do you have any other SCSI devices you can test on this card to
verify that it works?
--
C. Linus Hicks <lhicks(a)nc.rr.com>