Am Sa, den 13.11.2004 schrieb Vinicius um 23:56:
Thanks a lot!
It's working fine, I think.
Fine :)
Are the alarms below correct, please?
"$ sensors w83627hf-isa-0290 Adapter: ISA adapter VCore 1: +1.50 V (min = +0.00 V, max = +0.00 V) ALARM VCore 2: +1.73 V (min = +0.00 V, max = +0.00 V) ALARM
There are no boundary values for min and max.
+3.3V: +3.23 V (min = +3.14 V, max = +3.47 V) +5V: +4.97 V (min = +4.76 V, max = +5.24 V) ALARM
Between min and max - can't explain the alarm.
+12V: +11.86 V (min = +10.82 V, max = +13.19 V) ALARM
Here too.
-12V: +1.54 V (min = -13.18 V, max = -10.80 V) -5V: +2.59 V (min = -5.25 V, max = -4.75 V) V5SB: +5.38 V (min = +4.76 V, max = +5.24 V) VBat: +2.35 V (min = +2.40 V, max = +3.60 V) fan1: 2934 RPM (min = -1 RPM, div = 2) fan2: 0 RPM (min = 14062 RPM, div = 32) ALARM fan3: 0 RPM (min = -1 RPM, div = 2) ALARM
No fan rotation detected.
temp1: +40°C (high = -32°C, hyst = +16°C) sensor = PII/Celeron diode temp2: +7.5°C (high = +80°C, hyst = +75°C) sensor = thermistor temp3: -4.5°C (high = +122°C, hyst = +121°C) sensor = thermistor ERROR: Can't get VID data! alarms: Chassis intrusion detection ALARM
Ok here too.
beep_enable: Sound alarm disabled
eeprom-i2c-0-50 Adapter: SMBus I801 adapter at e800 Memory type: DDR SDRAM DIMM Memory size (MB): 256"
You should customize / adjust the /etc/sensors.conf.
TIA, Vinicius.
Alexander