On 1/1/07, Curtis Doty Curtis@greenkey.net wrote:
vamythguy wrote:
I have a RAID-5 array with four SATA disks in it. Apparently, two are going bad, so I want to replace them. But, I'm not sure which physical drives to pull. Given the following:
cat /proc/mdstat Personalities : [raid6] [raid5] [raid4] md0 : active raid5 sda[0] sdd[3] sdc[2] sdb[1] 735351936 blocks level 5, 64k chunk, algorithm 2 [4/4] [UUUU]
Any suggestions?
Odd that you have the raid4 and raid6 modules loaded, but still unfamiliar with /proc/mdstat...
Anyways, you are showing an array with four working disks; none failed. If you had a failed drive, it might look like [U_UU] which would mean the second disk had failed.
../C
-- fedora-list mailing list fedora-list@redhat.com To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
I know how /proc/mdstat works, so I know the drives haven't failed *yet*.
However my system log is reporting:
Dec 31 17:04:38 tibeaux smartd[2384]: Device: /dev/sda, 3 Offline uncorrectable sectors Dec 31 17:04:39 tibeaux smartd[2384]: Device: /dev/sdd, 48 Currently unreadable (pending) sectors
over and over again.
And another list member (Pedro Fernandes Macedo < webmaster@margo.bijoux.nom.br>) says this means the two disks are in danger of failing. So, unless I can safely prevent against that, I want to replace the disks before they do. I would just add a hot spare and let mdadm do it, but there is no room in the case. So, back to the original question...