On 01/11/2017 09:35 AM, Rami Rosen wrote:
Hi Chris,
I tried now first installing the powertop rpm and than running it, on
a Fedora 25 x86_64 platform, and I get exactly the same results:
...
ls /var/cache/power* -l
total 0
-rw-r--r--. 1 root root 0 Jan 11 19:30 saved_parameters.powertop
-rw-r--r--. 1 root root 0 Jan 11 19:30 saved_results.powertop
desku:~$powertop -c
modprobe cpufreq_stats failedLoaded 0 prior measurements
RAPL device for cpu 0
RAPL device for cpu 0...
I don't know what does this message mean, whether it indicates some
anomaly or not.
I get that, but lots of other stuff as well (powertop-2.8-2.fc24.x86_64
on an F25 system):
[root@golem4 ~]# powertop -c
modprobe cpufreq_stats failedLoaded 41 prior measurements
RAPL device for cpu 0
RAPL Using PowerCap Sysfs : Domain Mask d
RAPL device for cpu 0
RAPL Using PowerCap Sysfs : Domain Mask d
RAPL device for cpu 0
RAPL Using PowerCap Sysfs : Domain Mask d
Devfreq not enabled
Starting PowerTOP power estimate calibration
Calibrating idle
System is not available
unknown op '{'
To show power estimates do 238 measurement(s) connected to battery only
System is not available
Calibrating: disk usage
Calibrating backlight
.... device /sys/class/backlight/intel_backlight/brightness
.... device /sys/class/backlight/acpi_video0/brightness
Calibrating idle
System is not available
System is not available
Calibrating: CPU usage on 1 threads
Calibrating: CPU usage on 4 threads
Calibrating: CPU wakeup power consumption
Calibrating: CPU wakeup power consumption
Calibrating: CPU wakeup power consumption
Calibrating USB devices
.... device /sys/bus/usb/devices/usb3/power/control
.... device /sys/bus/usb/devices/2-1/power/control
.... device /sys/bus/usb/devices/usb1/power/control
.... device /sys/bus/usb/devices/2-1.5/power/control
.... device /sys/bus/usb/devices/1-1/power/control
.... device /sys/bus/usb/devices/usb4/power/control
.... device /sys/bus/usb/devices/usb2/power/control
.... device /sys/bus/usb/devices/1-1.4/power/control
.... device /sys/bus/usb/devices/2-1.6/power/control
Calibrating radio devices
.... device /sys/class/rfkill/rfkill4/soft
.... device /sys/class/rfkill/rfkill1/soft
.... device /sys/class/rfkill/rfkill4/soft
.... device /sys/class/rfkill/rfkill1/soft
Finishing PowerTOP power estimate calibration
Parameters after calibration:
Parameter state
----------------------------------
Value Name
0.50 alsa-codec-power (15)
0.00 backlight (4)
0.00 backlight-boost-100 (8)
0.00 backlight-boost-40 (6)
0.00 backlight-boost-80 (7)
0.00 backlight-power (5)
2.81 base power (89)
1.56 cpu-consumption (3)
39.50 cpu-wakeups (2)
0.00 disk-operations (91)
0.20 disk-operations-hard (90)
0.56 gpu-operations (18)
0.00 p4p1-link-100 (39)
0.00 p4p1-link-1000 (40)
0.00 p4p1-link-high (41)
0.00 p4p1-packets (42)
0.00 p4p1-powerunsave (38)
0.00 p4p1-up (37)
0.00 radio:hci0 (16)
0.00 radio:phy0 (17)
0.00 runtime-0000:00:00.0 (44)
0.00 runtime-0000:00:02.0 (48)
0.00 runtime-0000:00:16.0 (56)
0.00 runtime-0000:00:1a.0 (45)
0.00 runtime-0000:00:1b.0 (58)
0.00 runtime-0000:00:1c.0 (52)
0.00 runtime-0000:00:1c.2 (49)
0.00 runtime-0000:00:1c.4 (47)
0.00 runtime-0000:00:1c.5 (55)
0.00 runtime-0000:00:1d.0 (46)
0.00 runtime-0000:00:1f.0 (53)
0.00 runtime-0000:00:1f.2 (50)
0.00 runtime-0000:00:1f.3 (43)
0.00 runtime-0000:01:00.0 (57)
0.00 runtime-0000:02:00.0 (54)
0.00 runtime-0000:03:00.0 (51)
0.00 runtime-ACPI0003:00 (72)
0.00 runtime-Fixed MDIO bus.0 (75)
0.00 runtime-PNP0103:00 (59)
0.00 runtime-PNP0C04:00 (61)
0.00 runtime-PNP0C09:00 (69)
0.00 runtime-PNP0C0A:00 (70)
0.00 runtime-PNP0C0C:00 (76)
0.00 runtime-PNP0C0D:00 (68)
0.00 runtime-PNP0C0E:00 (60)
0.00 runtime-PNP0C14:00 (67)
0.00 runtime-PNP0C32:00 (71)
0.00 runtime-alarmtimer (65)
0.00 runtime-coretemp.0 (66)
0.00 runtime-dcdbas (78)
0.00 runtime-dell-laptop (63)
0.00 runtime-i2c-0 (86)
0.00 runtime-i2c-1 (82)
0.00 runtime-i2c-2 (85)
0.00 runtime-i2c-3 (81)
0.00 runtime-i2c-4 (84)
0.00 runtime-i2c-5 (88)
0.00 runtime-i2c-6 (83)
0.00 runtime-i2c-7 (87)
0.00 runtime-i8042 (79)
0.00 runtime-iTCO_wdt.0.auto (80)
0.00 runtime-microcode (64)
0.00 runtime-pcspkr (73)
0.00 runtime-regulatory.0 (62)
0.00 runtime-serial8250 (77)
0.00 runtime-vesa-framebuffer.0 (74)
0.10 usb-device-1bcf-2980 (13)
0.10 usb-device-1d6b-0002 (9)
0.10 usb-device-1d6b-0003 (12)
0.10 usb-device-8086-0189 (11)
0.10 usb-device-8087-0024 (10)
0.10 usb-device-8087-07d9 (14)
0.00 virbr0-link-100 (21)
0.00 virbr0-link-1000 (22)
0.00 virbr0-link-high (23)
0.00 virbr0-nic-link-100 (27)
0.00 virbr0-nic-link-1000 (28)
0.00 virbr0-nic-link-high (29)
0.00 virbr0-nic-packets (30)
0.00 virbr0-nic-powerunsave (26)
0.00 virbr0-nic-up (25)
0.00 virbr0-packets (24)
0.00 virbr0-powerunsave (20)
0.00 virbr0-up (19)
0.00 wlan0-link-100 (33)
0.00 wlan0-link-1000 (34)
0.00 wlan0-link-high (35)
0.00 wlan0-packets (36)
0.00 wlan0-powerunsave (32)
0.00 wlan0-up (31)
0.10 xwakes (92)
Score: 0.0 ( 0.0)
Guess: 2.8
Actual: 0.0
----------------------------------
Then it goes into a "top"-like display. After exiting, both the
saved_parameters.powertop and saved_results.powertop mtime stamps get
updated (although the saved_parameters.powertop file remains empty).
Try running with "--debug" set?
On 11 January 2017 at 19:17, Chris Murphy
<lists(a)colorremedies.com> wrote:
> [root at f25h ~]# ls -l /var/cache/powertop/
> total 0
> -rw-r--r--. 1 root root 0 Dec 29 14:49 saved_parameters.powertop
> -rw-r--r--. 1 root root 0 Dec 29 14:49 saved_results.powertop
>
> These files are always 0 length files. I'm not finding that any of the
> calibration runs I've done are actually getting saved.
>
> And each time I do a calibration...
>
> [root at f25h ~]# powertop -c
> modprobe cpufreq_stats failedLoaded 0 prior measurements
>
> That suggests there are no measurements. So... is it broken on F25 or
> am I missing something? I've asked on the powertop list and there's
> been no reply.
>
>
>
> --
> Chris Murphy
> _______________________________________________
> users mailing list -- users(a)lists.fedoraproject.org
> To unsubscribe send an email to users-leave(a)lists.fedoraproject.org
_______________________________________________
users mailing list -- users(a)lists.fedoraproject.org
To unsubscribe send an email to users-leave(a)lists.fedoraproject.org
--
----------------------------------------------------------------------
- Rick Stevens, Systems Engineer, AllDigital ricks(a)alldigital.com -
- AIM/Skype: therps2 ICQ: 226437340 Yahoo: origrps2 -
- -
- Political Correctness: The insane doctrine that postulates that it -
- is entirely possible to pick up a turd by the clean end. -
----------------------------------------------------------------------