My new mouse (a gembird 2 button, 1 wheel. It has a little round green plug which plugs into the mouse port on the back of my machine.) is too enthusiastic! It is set up to double-click to open programs from icons, but frequently it opens Konqueror from its side panel as two instances, instead of the required one.
When reading emails in KMail, it frequently jumps through one mail when I use the arrow button to move to the next unread message, decreases the email count by two, and marks the jumped-through email as being read ........ although I haven't read it!
And when spell-checking an email, its also jumping through two corrections and marking them both as corrected, even if the middle one is wrong!
I've also found that when moving between the desktops using the mouse-wheel, it frequently goes the wrong way before reversing direction and going to the right desktop!
/etc/X11/xorg.conf shows;- ======== Section "InputDevice" Identifier "Mouse0" Driver "mouse" Option "Protocol" "IMPS/2" Option "Device" "/dev/input/mice" Option "ZAxisMapping" "4 5" Option "Emulate3Buttons" "yes" EndSection ========
I've tried googling for an answer (using the search term 'mouse too fast on fedora core 3') but didn't find anything which seemed useful.
Can anyone help me to slow it down and get it working properly please?
Hopefully, thanks Sharon.
On Fri, 2005-05-13 at 12:04 +0100, Sharon Kimble wrote:
I've tried googling for an answer (using the search term 'mouse too fast on fedora core 3') but didn't find anything which seemed useful.
Can anyone help me to slow it down and get it working properly please?
Hi Sharon,
Try the "Preferences -> Mouse" menu - it has settings to affect the double click speed and the motion of the mouse.
Cheers, Ben
Ben Stringer ===== ben@burbong.com ==================================
On 5/13/05, Ben Stringer ben@burbong.com wrote:
On Fri, 2005-05-13 at 12:04 +0100, Sharon Kimble wrote:
I've tried googling for an answer (using the search term 'mouse too fast on fedora core 3') but didn't find anything which seemed useful.
Can anyone help me to slow it down and get it working properly please?
Hi Sharon,
Try the "Preferences -> Mouse" menu - it has settings to affect the double click speed and the motion of the mouse.
Thanks Ben. I've been into gnome and done this, but does this =only= relate to gnome or will it also work on kde too (because my desktop of choice is kde and I'm kde-centric :) ?
Back in kde it seemed to work for a little while, but now I'm not too sure. It seems as if the same old problems are creeping back in again.
Sharon.
On Friday 13 May 2005 08:05 am, Sharon Kimble wrote:
On 5/13/05, Ben Stringer ben@burbong.com wrote:
On Fri, 2005-05-13 at 12:04 +0100, Sharon Kimble wrote:
I've tried googling for an answer (using the search term 'mouse too fast on fedora core 3') but didn't find anything which seemed useful.
Can anyone help me to slow it down and get it working properly please?
Hi Sharon,
Try the "Preferences -> Mouse" menu - it has settings to affect the double click speed and the motion of the mouse.
Thanks Ben. I've been into gnome and done this, but does this =only= relate to gnome or will it also work on kde too (because my desktop of choice is kde and I'm kde-centric :) ?
Back in kde it seemed to work for a little while, but now I'm not too sure. It seems as if the same old problems are creeping back in again.
Sharon.
Try Under Preferences/Control Panel/Periphials/Mouse/Advanced
anybody can provide more suggestions for the maillog i have below
sendmail[18059]: Bad IPLOCALPORT value
i got it from testing FC4 test 1, i googled, i double check sendmail files...i missed the clues hanging around.
any tips?
TIA, milver nisay
Milver Nisay wrote:
anybody can provide more suggestions for the maillog i have below
sendmail[18059]: Bad IPLOCALPORT value
i got it from testing FC4 test 1, i googled, i double check sendmail files...i missed the clues hanging around.
any tips?
Please post your sendmail.mc
Paul.
sorry, typo errors. I noticed the Bad IPLOCALPORT from my /var/log/messages and not from maillog though it containts [sendmail] string id somehow. my sendmail works properly though. selinux is disabled here.
pasted below is my sendmail.mc ..thanks.
divert(-1)dnl dnl # dnl # This is the sendmail macro config file for m4. If you make changes to dnl # /etc/mail/sendmail.mc, you will need to regenerate the dnl # /etc/mail/sendmail.cf file by confirming that the sendmail-cf package is dnl # installed and then performing a dnl # dnl # make -C /etc/mail dnl # include(`/usr/share/sendmail-cf/m4/cf.m4')dnl VERSIONID(`setup for Red Hat Linux')dnl OSTYPE(`linux')dnl dnl # dnl # Uncomment and edit the following line if your outgoing mail needs to dnl # be sent out through an external mail server: dnl # dnl define(`SMART_HOST',`smtp.your.provider') dnl # define(`confDEF_USER_ID',``8:12'')dnl define(`confTRUSTED_USER', `smmsp')dnl dnl define(`confAUTO_REBUILD')dnl define(`confTO_CONNECT', `1m')dnl define(`confTRY_NULL_MX_LIST',true)dnl define(`confDONT_PROBE_INTERFACES',true)dnl define(`PROCMAIL_MAILER_PATH',`/usr/bin/procmail')dnl define(`ALIAS_FILE', `/etc/mail/aliases')dnl dnl define(`STATUS_FILE', `/etc/mail/statistics')dnl define(`UUCP_MAILER_MAX', `2000000')dnl define(`confUSERDB_SPEC', `/etc/mail/userdb.db')dnl define(`confPRIVACY_FLAGS', `authwarnings,novrfy,noexpn,restrictqrun')dnl dnl define(`confAUTH_OPTIONS', `A')dnl dnl # dnl # The following allows relaying if the user authenticates, and disallows dnl # plaintext authentication (PLAIN/LOGIN) on non-TLS links dnl # dnl define(`confAUTH_OPTIONS', `A p')dnl dnl # dnl # PLAIN is the preferred plaintext authentication method and used by dnl # Mozilla Mail and Evolution, though Outlook Express and other MUAs do dnl # use LOGIN. Other mechanisms should be used if the connection is not dnl # guaranteed secure. dnl # dnl TRUST_AUTH_MECH(`EXTERNAL DIGEST-MD5 CRAM-MD5 LOGIN PLAIN')dnl dnl define(`confAUTH_MECHANISMS', `EXTERNAL GSSAPI DIGEST-MD5 CRAM-MD5 LOGIN PLAIN')dnl dnl # dnl # Rudimentary information on creating certificates for sendmail TLS: dnl # make -C /usr/share/ssl/certs usage dnl # dnl define(`confCACERT_PATH',`/usr/share/ssl/certs') dnl define(`confCACERT',`/usr/share/ssl/certs/ca-bundle.crt') dnl define(`confSERVER_CERT',`/usr/share/ssl/certs/sendmail.pem') dnl define(`confSERVER_KEY',`/usr/share/ssl/certs/sendmail.pem') dnl # dnl # This allows sendmail to use a keyfile that is shared with OpenLDAP's dnl # slapd, which requires the file to be readble by group ldap dnl # dnl define(`confDONT_BLAME_SENDMAIL',`groupreadablekeyfile')dnl dnl # dnl define(`confTO_QUEUEWARN', `4h')dnl dnl define(`confTO_QUEUERETURN', `5d')dnl dnl define(`confQUEUE_LA', `12')dnl dnl define(`confREFUSE_LA', `18')dnl define(`confTO_IDENT', `0')dnl dnl FEATURE(delay_checks)dnl FEATURE(`no_default_msa',`dnl')dnl FEATURE(`smrsh',`/usr/sbin/smrsh')dnl FEATURE(`mailertable',`hash -o /etc/mail/mailertable.db')dnl FEATURE(`virtusertable',`hash -o /etc/mail/virtusertable.db')dnl FEATURE(redirect)dnl FEATURE(always_add_domain)dnl FEATURE(use_cw_file)dnl FEATURE(use_ct_file)dnl dnl # dnl # The -t option will retry delivery if e.g. the user runs over his quota. dnl # FEATURE(local_procmail,`',`procmail -t -Y -a $h -d $u')dnl FEATURE(`access_db',`hash -T<TMPF> -o /etc/mail/access.db')dnl FEATURE(`blacklist_recipients')dnl EXPOSED_USER(`root')dnl dnl # dnl # The following causes sendmail to only listen on the IPv4 loopback address dnl # 127.0.0.1 and not on any other network devices. Remove the loopback dnl # address restriction to accept email from the internet or intranet. dnl # dnl DAEMON_OPTIONS(`Port=smtp,Addr=127.0.0.1, Name=MTA')dnl dnl # dnl # The following causes sendmail to additionally listen to port 587 for dnl # mail from MUAs that authenticate. Roaming users who can't reach their dnl # preferred sendmail daemon due to port 25 being blocked or redirected find dnl # this useful. dnl # dnl DAEMON_OPTIONS(`Port=submission, Name=MSA, M=Ea')dnl dnl # dnl # The following causes sendmail to additionally listen to port 465, but dnl # starting immediately in TLS mode upon connecting. Port 25 or 587 followed dnl # by STARTTLS is preferred, but roaming clients using Outlook Express can't dnl # do STARTTLS on ports other than 25. Mozilla Mail can ONLY use STARTTLS dnl # and doesn't support the deprecated smtps; Evolution <1.1.1 uses smtps dnl # when SSL is enabled-- STARTTLS support is available in version 1.1.1. dnl # dnl # For this to work your OpenSSL certificates must be configured. dnl # dnl DAEMON_OPTIONS(`Port=smtps, Name=TLSMTA, M=s')dnl dnl # dnl # The following causes sendmail to additionally listen on the IPv6 loopback dnl # device. Remove the loopback address restriction listen to the network. dnl # dnl # NOTE: binding both IPv4 and IPv6 daemon to the same port requires dnl # a kernel patch dnl # dnl DAEMON_OPTIONS(`port=smtp,Addr=::1, Name=MTA-v6, Family=inet6')dnl dnl # dnl # We strongly recommend not accepting unresolvable domains if you want to dnl # protect yourself from spam. However, the laptop and users on computers dnl # that do not have 24x7 DNS do need this. dnl # FEATURE(`accept_unresolvable_domains')dnl dnl # dnl FEATURE(`relay_based_on_MX')dnl dnl # dnl # Also accept email sent to "localhost.localdomain" as local email. dnl # LOCAL_DOMAIN(`localhost.localdomain')dnl dnl # dnl # The following example makes mail from this host and any additional dnl # specified domains appear to be sent from mydomain.com dnl # dnl MASQUERADE_AS(`mydomain.com')dnl dnl # dnl # masquerade not just the headers, but the envelope as well dnl # dnl FEATURE(masquerade_envelope)dnl dnl # dnl # masquerade not just @mydomainalias.com, but @*.mydomainalias.com as well dnl # dnl FEATURE(masquerade_entire_domain)dnl dnl # dnl MASQUERADE_DOMAIN(localhost)dnl dnl MASQUERADE_DOMAIN(localhost.localdomain)dnl dnl MASQUERADE_DOMAIN(mydomainalias.com)dnl dnl MASQUERADE_DOMAIN(mydomain.lan)dnl MAILER(smtp)dnl MAILER(procmail)dnl dnl define(`_FFR_MILTER', `true')
-----Original Message----- From: fedora-list-bounces@redhat.com [mailto:fedora-list-bounces@redhat.com] On Behalf Of Paul Howarth Sent: Friday, May 13, 2005 12:42 PM To: For users of Fedora Core releases Subject: Re: sendmail[18059]: Bad IPLOCALPORT value
Milver Nisay wrote:
anybody can provide more suggestions for the maillog i have below
sendmail[18059]: Bad IPLOCALPORT value
i got it from testing FC4 test 1, i googled, i double check sendmail files...i missed the clues hanging around.
any tips?
Please post your sendmail.mc
Paul.
Milver Nisay wrote:
sorry, typo errors. I noticed the Bad IPLOCALPORT from my /var/log/messages and not from maillog though it containts [sendmail] string id somehow. my sendmail works properly though. selinux is disabled here.
pasted below is my sendmail.mc ..thanks.
It's probably nothing to do with your sendmail.mc; I think it may be SASL, so you'd only notice an issue if you were using SMTP AUTH.
One thing that may be worth trying is turning off IPv6 support.
Try adding:
alias net-pf-10 off alias ipv6 off
to /etc/modprobe.conf
This won't take effect until after a reboot.
P.S. Please do not top-post on this mailing list.
Paul.
On 5/13/05, Sharon Kimble skimble04@gmail.com wrote:
My new mouse (a gembird 2 button, 1 wheel. It has a little round green plug which plugs into the mouse port on the back of my machine.) is too enthusiastic! It is set up to double-click to open programs from icons, but frequently it opens Konqueror from its side panel as two instances, instead of the required one.
When reading emails in KMail, it frequently jumps through one mail when I use the arrow button to move to the next unread message, decreases the email count by two, and marks the jumped-through email as being read ........ although I haven't read it!
And when spell-checking an email, its also jumping through two corrections and marking them both as corrected, even if the middle one is wrong!
I've also found that when moving between the desktops using the mouse-wheel, it frequently goes the wrong way before reversing direction and going to the right desktop!
/etc/X11/xorg.conf shows;-
Section "InputDevice" Identifier "Mouse0" Driver "mouse" Option "Protocol" "IMPS/2" Option "Device" "/dev/input/mice" Option "ZAxisMapping" "4 5" Option "Emulate3Buttons" "yes" EndSection ========
I've tried googling for an answer (using the search term 'mouse too fast on fedora core 3') but didn't find anything which seemed useful.
Can anyone help me to slow it down and get it working properly please?
Hopefully, thanks Sharon. --
Hi Sharon,
Try: Control Center --> Peripherals --> Mouse --> Advanced
There's a control for the double click interval there.
-
Ben Stringer -
Gustavo Seabra -
jludwig -
milvertito -
Paul Howarth -
Sharon Kimble