Hello,
I wanted to install fedora 33 on a laptop with a M2 SSD 128.Go, but it is not recognized by fdisk (fedora live WK). Is a driver missing? The SSD is recognized by he bios.
Thanks
=========================================================================== Patrick DUPRÉ | | email: pdupre@gmx.com Laboratoire interdisciplinaire Carnot de Bourgogne 9 Avenue Alain Savary, BP 47870, 21078 DIJON Cedex FRANCE Tel: +33 (0)380395988 | | Room# D114A ===========================================================================
On 2021-04-08 1:45 p.m., Patrick Dupre wrote:
Hello,
I wanted to install fedora 33 on a laptop with a M2 SSD 128.Go, but it is not recognized by fdisk (fedora live WK). Is a driver missing? The SSD is recognized by he bios.
Thanks
Your question is vague and lacking in details. This might help;
https://opensource.com/life/16/10/how-ask-technical-questions
Hello,
I wanted to install fedora 33 on a laptop with a M2 SSD 128.Go, but it is not recognized by fdisk (fedora live WK). Is a driver missing? The SSD is recognized by the bios.
It is a Dell laptop. Is is an internal M2 format! I boot on the fedora live USB key. neither fidsk or cfdifk or gparted see the SSD (only the USB key is recognized)
Thanks
Your question is vague and lacking in details. This might help;
https://opensource.com/life/16/10/how-ask-technical-questions
-- Digimer Papers and Projects: https://alteeve.com/w/ "I am, somehow, less interested in the weight and convolutions of Einstein’s brain than in the near certainty that people of equal talent have lived and died in cotton fields and sweatshops." - Stephen Jay Gould
Anything in dmsg ?
On Thu, Apr 8, 2021 at 2:22 PM Patrick Dupre pdupre@gmx.com wrote:
Hello,
I wanted to install fedora 33 on a laptop with a M2 SSD 128.Go, but it
is not
recognized by fdisk (fedora live WK). Is a driver missing? The SSD is recognized by the bios.
It is a Dell laptop. Is is an internal M2 format! I boot on the fedora live USB key. neither fidsk or cfdifk or gparted see the SSD (only the USB key is recognized)
Thanks
Your question is vague and lacking in details. This might help;
https://opensource.com/life/16/10/how-ask-technical-questions
-- Digimer Papers and Projects: https://alteeve.com/w/ "I am, somehow, less interested in the weight and convolutions of Einstein’s brain than in the near certainty that people of equal talent have lived and died in cotton fields and sweatshops." - Stephen Jay Gould
users mailing list -- users@lists.fedoraproject.org To unsubscribe send an email to users-leave@lists.fedoraproject.org Fedora Code of Conduct: https://docs.fedoraproject.org/en-US/project/code-of-conduct/ List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines List Archives: https://lists.fedoraproject.org/archives/list/users@lists.fedoraproject.org Do not reply to spam on the list, report it: https://pagure.io/fedora-infrastructure
According to the information that I grabbed. This SSD has a windows installed The drive would be encrypted.
My original idea what to install a dual-boot. It seems compromised. Is it a way for microsoft to fight against Linux?
Hello,
I wanted to install fedora 33 on a laptop with a M2 SSD 128.Go, but it is not recognized by fdisk (fedora live WK). Is a driver missing? The SSD is recognized by the bios.
It is a Dell laptop. Is is an internal M2 format! I boot on the fedora live USB key. neither fidsk or cfdifk or gparted see the SSD (only the USB key is recognized)
Thanks
Your question is vague and lacking in details. This might help;
https://opensource.com/life/16/10/how-ask-technical-questions
-- Digimer Papers and Projects: https://alteeve.com/w/ "I am, somehow, less interested in the weight and convolutions of Einstein’s brain than in the near certainty that people of equal talent have lived and died in cotton fields and sweatshops." - Stephen Jay Gould
users mailing list -- users@lists.fedoraproject.org To unsubscribe send an email to users-leave@lists.fedoraproject.org Fedora Code of Conduct: https://docs.fedoraproject.org/en-US/project/code-of-conduct/ List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines List Archives: https://lists.fedoraproject.org/archives/list/users@lists.fedoraproject.org Do not reply to spam on the list, report it: https://pagure.io/fedora-infrastructure
在 2021-04-08星期四的 22:04 +0200,Patrick Dupre写道:
According to the information that I grabbed. This SSD has a windows installed The drive would be encrypted.
Usually encrypted means bitlocker, while it is on filesystem level and have nothing to do with the hardware.
For a m.2 device, it can be either on SATA bus or PCIe bus as a NVME device, see if lspci |grep "Non-Volatile memory controller" or dmesg |grep nvme gives you information about the disk. If no output above, then see dmesg |grep SATA if still no output, we can tell that the disk is not recognized after all.
My original idea what to install a dual-boot. It seems compromised. Is it a way for microsoft to fight against Linux?
Hello,
I wanted to install fedora 33 on a laptop with a M2 SSD 128.Go, but it is not recognized by fdisk (fedora live WK). Is a driver missing? The SSD is recognized by the bios.
It is a Dell laptop. Is is an internal M2 format! I boot on the fedora live USB key. neither fidsk or cfdifk or gparted see the SSD (only the USB key is recognized)
Thanks
Your question is vague and lacking in details. This might help;
https://opensource.com/life/16/10/how-ask-technical-questions
-- Digimer Papers and Projects: https://alteeve.com/w/ "I am, somehow, less interested in the weight and convolutions of Einstein’s brain than in the near certainty that people of equal talent have lived and died in cotton fields and sweatshops." - Stephen Jay Gould
users mailing list -- users@lists.fedoraproject.org To unsubscribe send an email to users-leave@lists.fedoraproject.org Fedora Code of Conduct: https://docs.fedoraproject.org/en- US/project/code-of-conduct/ List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines List Archives: https://lists.fedoraproject.org/archives/list/users@lists.fedorapro ject.org Do not reply to spam on the list, report it: https://pagure.io/fedora-infrastructure
users mailing list -- users@lists.fedoraproject.org To unsubscribe send an email to users-leave@lists.fedoraproject.org Fedora Code of Conduct: https://docs.fedoraproject.org/en- US/project/code-of-conduct/ List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines List Archives: https://lists.fedoraproject.org/archives/list/users@lists.fedoraproje ct.org Do not reply to spam on the list, report it: https://pagure.io/fedora-infrastructure
On Thu, Apr 8, 2021 at 2:22 PM Patrick Dupre pdupre@gmx.com wrote:
Hello,
I wanted to install fedora 33 on a laptop with a M2 SSD 128.Go, but it
is not
recognized by fdisk (fedora live WK). Is a driver missing? The SSD is recognized by the bios.
It is a Dell laptop. Is is an internal M2 format! I boot on the fedora live USB key. neither fidsk or cfdifk or gparted see the SSD (only the USB key is recognized)
I'm interested in this too. I'd like to install the OS on the SSD drive (without atime) so it can all be relatively read-only. And put /home onto the spinning drive I just purchased for it. B.T.W. It's a Dell G3 laptop.
On Thu, Apr 8, 2021 at 11:46 AM Patrick Dupre pdupre@gmx.com wrote:
Hello,
I wanted to install fedora 33 on a laptop with a M2 SSD 128.Go, but it is not recognized by fdisk (fedora live WK).
Dell likes to configure the SSD as a RAID in the BIOS. Even though their Windows installation is not using it as a RAID device. When it is set to RAID in the BIOS, Linux cannot see it. For Linux to run, it must be set to AHCI mode. In my relatively new Dell workstation, this is under System Configuration -> SATA Operations.
It "should" be safe (all I can say is that it was for me) to go in and verify that your SATA mode is set RAID (in which case this is likely the cause of your problem), set it to AHCI, and then boot your Linux USB stick. It should then see the SSD.
Unfortunately, Windows will now not boot unless you change it back to RAID. If you were planning to keep the installed Windows system (which I wanted to do), then there is a procedure you can Google for (it might have even been referred to on this list) that will allow the Dell-installed Windows to boot in non-RAID mode. I followed the directions and can now dual boot Windows and Linux out of the GRUB menu.
--Greg
On Friday, April 9, 2021 1:11:01 AM WEST Greg Woods wrote:
Dell likes to configure the SSD as a RAID in the BIOS. Even though their Windows installation is not using it as a RAID device. When it is set to RAID in the BIOS, Linux cannot see it. For Linux to run, it must be set to AHCI mode. In my relatively new Dell workstation, this is under System Configuration -> SATA Operations.
It "should" be safe (all I can say is that it was for me) to go in and verify that your SATA mode is set RAID (in which case this is likely the cause of your problem), set it to AHCI, and then boot your Linux USB stick. It should then see the SSD.
Unfortunately, Windows will now not boot unless you change it back to RAID. If you were planning to keep the installed Windows system (which I wanted to do), then there is a procedure you can Google for (it might have even been referred to on this list) that will allow the Dell-installed Windows to boot in non-RAID mode. I followed the directions and can now dual boot Windows and Linux out of the GRUB menu.
--Greg
This is +1 message. :-)
Yesterday I had precisely the same issue and the solution that Greg stated was the solution. This was a Dell XPS 15.
In this case the windows version was erased so there was no need for the workaround. Looking in the BIOS, in the storage section, was enough to see that the chosen configuration was RAID, changing it to AHCI allowed the installer to see the disk and to proceed with the installation.
Regards,
Sent: Friday, April 09, 2021 at 9:46 AM From: "José Abílio Matos" jaomatos@gmail.com To: users@lists.fedoraproject.org Subject: Re: M2 on laptop
On Friday, April 9, 2021 1:11:01 AM WEST Greg Woods wrote:
Dell likes to configure the SSD as a RAID in the BIOS. Even though their Windows installation is not using it as a RAID device. When it is set to RAID in the BIOS, Linux cannot see it. For Linux to run, it must be set to AHCI mode. In my relatively new Dell workstation, this is under System Configuration -> SATA Operations.
It "should" be safe (all I can say is that it was for me) to go in and verify that your SATA mode is set RAID (in which case this is likely the cause of your problem), set it to AHCI, and then boot your Linux USB stick. It should then see the SSD.
Unfortunately, Windows will now not boot unless you change it back to RAID. If you were planning to keep the installed Windows system (which I wanted to do), then there is a procedure you can Google for (it might have even been referred to on this list) that will allow the Dell-installed Windows to boot in non-RAID mode. I followed the directions and can now dual boot Windows and Linux out of the GRUB menu.
--Greg
This is +1 message. :-)
Yesterday I had precisely the same issue and the solution that Greg stated was the solution. This was a Dell XPS 15.
In this case the windows version was erased so there was no need for the workaround. Looking in the BIOS, in the storage section, was enough to see that the chosen configuration was RAID, changing it to AHCI allowed the installer to see the disk and to proceed with the installation.
Regards,
José Matos
Finally can I expect to install a dual-boot by keeping the installed windows running after shrinking the original partition if I need? These 2 comments do not seem to match together.
Depending on whose fake-raid it is you might be able to provide an extra driver for it, or need an extra option. I know that the intel raids have some sort of pieces that will allow dm-raid to see and manage them. Beyond that I don't know much about it as I always attempt to avoid using the fake-raid no matter what. If you find the part that makes it work that part would need to continue to be in the initramfs for any updating going forward so at best it is going to be troublesome in the future.
And most of the laptops that have an M2 may also still have an open real sata location (maybe even with a cable) that you could also put a sata ssd or spinning disk in, and dual boot that way. The 2 most recent ones I have opened that came with a M2 both had a location but only one had the correct cable for power and sata.
On Fri, Apr 9, 2021 at 4:22 AM Patrick Dupre pdupre@gmx.com wrote:
Sent: Friday, April 09, 2021 at 9:46 AM From: "José Abílio Matos" jaomatos@gmail.com To: users@lists.fedoraproject.org Subject: Re: M2 on laptop
On Friday, April 9, 2021 1:11:01 AM WEST Greg Woods wrote:
Dell likes to configure the SSD as a RAID in the BIOS. Even though their Windows installation is not using it as a RAID device. When it is set to RAID in the BIOS, Linux cannot see it. For Linux to run, it must be set to AHCI mode. In my relatively new Dell workstation, this is under System Configuration -> SATA Operations.
It "should" be safe (all I can say is that it was for me) to go in and verify that your SATA mode is set RAID (in which case this is likely the cause of your problem), set it to AHCI, and then boot your Linux USB stick. It should then see the SSD.
Unfortunately, Windows will now not boot unless you change it back to RAID. If you were planning to keep the installed Windows system (which I wanted to do), then there is a procedure you can Google for (it might have even been referred to on this list) that will allow the Dell-installed Windows to boot in non-RAID mode. I followed the directions and can now dual boot Windows and Linux out of the GRUB menu.
--Greg
This is +1 message. :-)
Yesterday I had precisely the same issue and the solution that Greg stated was the solution. This was a Dell XPS 15.
In this case the windows version was erased so there was no need for the workaround. Looking in the BIOS, in the storage section, was enough to see that the chosen configuration was RAID, changing it to AHCI allowed the installer to see the disk and to proceed with the installation.
Regards,
José Matos
Finally can I expect to install a dual-boot by keeping the installed windows running after shrinking the original partition if I need? These 2 comments do not seem to match together. _______________________________________________ users mailing list -- users@lists.fedoraproject.org To unsubscribe send an email to users-leave@lists.fedoraproject.org Fedora Code of Conduct: https://docs.fedoraproject.org/en-US/project/code-of-conduct/ List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines List Archives: https://lists.fedoraproject.org/archives/list/users@lists.fedoraproject.org Do not reply to spam on the list, report it: https://pagure.io/fedora-infrastructure
On Fri, Apr 9, 2021 at 7:26 AM Roger Heflin rogerheflin@gmail.com wrote:
... snip ...
And most of the laptops that have an M2 may also still have an open
real sata location (maybe even with a cable) that you could also put a sata ssd or spinning disk in, and dual boot that way. The 2 most recent ones I have opened that came with a M2 both had a location but only one had the correct cable for power and sata.
The Dell G3 I acquired fits that bill. I ordered the requisite parts from Dell, and they came yesterday:
$ 0.73 for the mounting bracket $ 0.68 for the cable $ 0.12 for the 3 mounting screws to attach the bracket to the chassis $11.96 for the 4 screws to attach the drive to the bracket
Oh, and $15 shipping and handling.
On Thu, 2021-04-08 at 18:11 -0600, Greg Woods wrote:
Dell likes to configure the SSD as a RAID in the BIOS. Even though their Windows installation is not using it as a RAID device. When it is set to RAID in the BIOS, Linux cannot see it. For Linux to run, it must be set to AHCI mode. In my relatively new Dell workstation, this is under System Configuration -> SATA Operations.
It "should" be safe (all I can say is that it was for me) to go in and verify that your SATA mode is set RAID (in which case this is likely the cause of your problem), set it to AHCI, and then boot your Linux USB stick. It should then see the SSD.
Unfortunately, Windows will now not boot unless you change it back to RAID. If you were planning to keep the installed Windows system (which I wanted to do), then there is a procedure you can Google for (it might have even been referred to on this list) that will allow the Dell-installed Windows to boot in non-RAID mode. I followed the directions and can now dual boot Windows and Linux out of the GRUB menu.
I believe I have shared this link before on the list. It worked to allow me to keep my existing Windows installation dual boot my Dell XPS 13 (after resizing the partition of course)
https://support.thinkcritical.com/kb/articles/switch-windows-10-from-raid-id...
Hi guys!!
Thanks for the information helping the OP with his/her/their issue.
I'm not trying to take over the thread, but I'm going to run into a similar situation.
I'm thinking of getting a laptop (hp/lenovo/dell) that would have windows installed on the SSD. I'm thinking of getting an additional 2G 2.5" SATA and would like to be able to dual boot windows/fed (or rhel).
For those of you who've gone down this path. What are issues I need to be aware of that I can resolve prior to getting the box? Questions I should ask the presales tech support?
Thanks much!
On Fri, Apr 9, 2021 at 9:59 AM Kevin Becker kevin@kevinbecker.org wrote:
On Thu, 2021-04-08 at 18:11 -0600, Greg Woods wrote:
Dell likes to configure the SSD as a RAID in the BIOS. Even though their Windows installation is not using it as a RAID device. When it is set to RAID in the BIOS, Linux cannot see it. For Linux to run, it must be set to AHCI mode. In my relatively new Dell workstation, this is under System Configuration -> SATA Operations.
It "should" be safe (all I can say is that it was for me) to go in and verify that your SATA mode is set RAID (in which case this is likely the cause of your problem), set it to AHCI, and then boot your Linux USB stick. It should then see the SSD.
Unfortunately, Windows will now not boot unless you change it back to RAID. If you were planning to keep the installed Windows system (which I wanted to do), then there is a procedure you can Google for (it might have even been referred to on this list) that will allow the Dell-installed Windows to boot in non-RAID mode. I followed the directions and can now dual boot Windows and Linux out of the GRUB menu.
I believe I have shared this link before on the list. It worked to allow me to keep my existing Windows installation dual boot my Dell XPS 13 (after resizing the partition of course)
https://support.thinkcritical.com/kb/articles/switch-windows-10-from-raid-id...
users mailing list -- users@lists.fedoraproject.org To unsubscribe send an email to users-leave@lists.fedoraproject.org Fedora Code of Conduct: https://docs.fedoraproject.org/en-US/project/code-of-conduct/ List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines List Archives: https://lists.fedoraproject.org/archives/list/users@lists.fedoraproject.org Do not reply to spam on the list, report it: https://pagure.io/fedora-infrastructure
You can likely ask pre-sales tech support every question you want to, it will likely resolve nothing. The odds of any answer they give you (on something like this) being right is 50/50 (ie not to be trusted nor relied on). Checking the manual and what other people trying to do similar things say is going to be much more accurate (google the model). Most tech support are trained to be confident in what they say hence you can never tell if they are a deer in the headlights making things up. I have only really caught them at the time when I immediately know what they just said was not true. So if you ask all of the questions you may only end up buying from the company with the most confident sounding tech support person that made it all up.
It is not a great state but it seems to be reality. I won't waste the time asking the questions because the accuracy of the info I get is so low that the info cannot be used.
On Fri, Apr 9, 2021 at 10:58 AM bruce badouglas@gmail.com wrote:
Hi guys!!
Thanks for the information helping the OP with his/her/their issue.
I'm not trying to take over the thread, but I'm going to run into a similar situation.
I'm thinking of getting a laptop (hp/lenovo/dell) that would have windows installed on the SSD. I'm thinking of getting an additional 2G 2.5" SATA and would like to be able to dual boot windows/fed (or rhel).
For those of you who've gone down this path. What are issues I need to be aware of that I can resolve prior to getting the box? Questions I should ask the presales tech support?
Thanks much!
On Fri, Apr 9, 2021 at 9:59 AM Kevin Becker kevin@kevinbecker.org wrote:
On Thu, 2021-04-08 at 18:11 -0600, Greg Woods wrote:
Dell likes to configure the SSD as a RAID in the BIOS. Even though their Windows installation is not using it as a RAID device. When it is set to RAID in the BIOS, Linux cannot see it. For Linux to run, it must be set to AHCI mode. In my relatively new Dell workstation, this is under System Configuration -> SATA Operations.
It "should" be safe (all I can say is that it was for me) to go in and verify that your SATA mode is set RAID (in which case this is likely the cause of your problem), set it to AHCI, and then boot your Linux USB stick. It should then see the SSD.
Unfortunately, Windows will now not boot unless you change it back to RAID. If you were planning to keep the installed Windows system (which I wanted to do), then there is a procedure you can Google for (it might have even been referred to on this list) that will allow the Dell-installed Windows to boot in non-RAID mode. I followed the directions and can now dual boot Windows and Linux out of the GRUB menu.
I believe I have shared this link before on the list. It worked to allow me to keep my existing Windows installation dual boot my Dell XPS 13 (after resizing the partition of course)
https://support.thinkcritical.com/kb/articles/switch-windows-10-from-raid-id...
users mailing list -- users@lists.fedoraproject.org To unsubscribe send an email to users-leave@lists.fedoraproject.org Fedora Code of Conduct: https://docs.fedoraproject.org/en-US/project/code-of-conduct/ List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines List Archives: https://lists.fedoraproject.org/archives/list/users@lists.fedoraproject.org Do not reply to spam on the list, report it: https://pagure.io/fedora-infrastructure
users mailing list -- users@lists.fedoraproject.org To unsubscribe send an email to users-leave@lists.fedoraproject.org Fedora Code of Conduct: https://docs.fedoraproject.org/en-US/project/code-of-conduct/ List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines List Archives: https://lists.fedoraproject.org/archives/list/users@lists.fedoraproject.org Do not reply to spam on the list, report it: https://pagure.io/fedora-infrastructure
Hello Everyone. Some time ago I helped a friend purchase a Dell laptop (I don’t remember which crowd she got the laptop from) and specified that the drive be partitioned accordingly and configured dual boot windows and Linux. They did so without question but would not install Linux because they contract to windows.
Maybe making such a specification before purchase is still feasible. Just thinking Cheers Roger
On 10 Apr 2021, at 1:58 am, bruce badouglas@gmail.com wrote:
Hi guys!!
Thanks for the information helping the OP with his/her/their issue.
I'm not trying to take over the thread, but I'm going to run into a similar situation.
I'm thinking of getting a laptop (hp/lenovo/dell) that would have windows installed on the SSD. I'm thinking of getting an additional 2G 2.5" SATA and would like to be able to dual boot windows/fed (or rhel).
For those of you who've gone down this path. What are issues I need to be aware of that I can resolve prior to getting the box? Questions I should ask the presales tech support?
Thanks much!
On Fri, Apr 9, 2021 at 9:59 AM Kevin Becker kevin@kevinbecker.org wrote:
On Thu, 2021-04-08 at 18:11 -0600, Greg Woods wrote:
Dell likes to configure the SSD as a RAID in the BIOS. Even though their Windows installation is not using it as a RAID device. When it is set to RAID in the BIOS, Linux cannot see it. For Linux to run, it must be set to AHCI mode. In my relatively new Dell workstation, this is under System Configuration -> SATA Operations.
It "should" be safe (all I can say is that it was for me) to go in and verify that your SATA mode is set RAID (in which case this is likely the cause of your problem), set it to AHCI, and then boot your Linux USB stick. It should then see the SSD.
Unfortunately, Windows will now not boot unless you change it back to RAID. If you were planning to keep the installed Windows system (which I wanted to do), then there is a procedure you can Google for (it might have even been referred to on this list) that will allow the Dell-installed Windows to boot in non-RAID mode. I followed the directions and can now dual boot Windows and Linux out of the GRUB menu.
I believe I have shared this link before on the list. It worked to allow me to keep my existing Windows installation dual boot my Dell XPS 13 (after resizing the partition of course)
https://support.thinkcritical.com/kb/articles/switch-windows-10-from-raid-id...
users mailing list -- users@lists.fedoraproject.org To unsubscribe send an email to users-leave@lists.fedoraproject.org Fedora Code of Conduct: https://docs.fedoraproject.org/en-US/project/code-of-conduct/ List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines List Archives: https://lists.fedoraproject.org/archives/list/users@lists.fedoraproject.org Do not reply to spam on the list, report it: https://pagure.io/fedora-infrastructure
users mailing list -- users@lists.fedoraproject.org To unsubscribe send an email to users-leave@lists.fedoraproject.org Fedora Code of Conduct: https://docs.fedoraproject.org/en-US/project/code-of-conduct/ List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines List Archives: https://lists.fedoraproject.org/archives/list/users@lists.fedoraproject.org Do not reply to spam on the list, report it: https://pagure.io/fedora-infrastructure