Hi,
I have downloaded fedora mate spin and created a liveusb image with livecreator-usb, however I can't boot it, please see the snapshot attached.
My computer details are below. Any idea on how to solve it ?
thanks, Ionut Radu.
[ionut@localhost ~]$ cat /proc/cpuinfo processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 23 model name : Intel(R) Core(TM)2 Duo CPU T6400 @ 2.00GHz stepping : 10 microcode : 0xa0b cpu MHz : 1200.000 cache size : 2048 KB physical id : 0 siblings : 2 core id : 0 cpu cores : 2 apicid : 0 initial apicid : 0 fpu : yes fpu_exception : yes cpuid level : 13 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm constant_tsc arch_perfmon pebs bts rep_good nopl aperfmperf pni dtes64 monitor ds_cpl est tm2 ssse3 cx16 xtpr pdcm sse4_1 xsave lahf_lm dtherm bogomips : 3990.06 clflush size : 64 cache_alignment : 64 address sizes : 36 bits physical, 48 bits virtual power management:
processor : 1 vendor_id : GenuineIntel cpu family : 6 model : 23 model name : Intel(R) Core(TM)2 Duo CPU T6400 @ 2.00GHz stepping : 10 microcode : 0xa0b cpu MHz : 1200.000 cache size : 2048 KB physical id : 0 siblings : 2 core id : 1 cpu cores : 2 apicid : 1 initial apicid : 1 fpu : yes fpu_exception : yes cpuid level : 13 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm constant_tsc arch_perfmon pebs bts rep_good nopl aperfmperf pni dtes64 monitor ds_cpl est tm2 ssse3 cx16 xtpr pdcm sse4_1 xsave lahf_lm dtherm bogomips : 3990.06 clflush size : 64 cache_alignment : 64 address sizes : 36 bits physical, 48 bits virtual power management:
0:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07) 00:01.0 PCI bridge: Intel Corporation Mobile 4 Series Chipset PCI Express Graphics Port (rev 07) 00:1a.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03) 00:1a.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03) 00:1a.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 03) 00:1a.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03) 00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03) 00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 03) 00:1c.1 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 (rev 03) 00:1c.2 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 3 (rev 03) 00:1c.3 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 4 (rev 03) 00:1c.5 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 6 (rev 03) 00:1d.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03) 00:1d.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03) 00:1d.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03) 00:1d.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93) 00:1f.0 ISA bridge: Intel Corporation ICH9M LPC Interface Controller (rev 03) 00:1f.2 SATA controller: Intel Corporation 82801IBM/IEM (ICH9M/ICH9M-E) 4 port SATA Controller [AHCI mode] (rev 03) 00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 03) 01:00.0 VGA compatible controller: NVIDIA Corporation G98M [GeForce 9300M GS] (rev a1) 02:00.0 System peripheral: JMicron Technology Corp. SD/MMC Host Controller 02:00.2 SD Host controller: JMicron Technology Corp. Standard SD Host Controller 02:00.3 System peripheral: JMicron Technology Corp. MS Host Controller 04:00.0 Network controller: Intel Corporation PRO/Wireless 5100 AGN [Shiloh] Network Connection 07:00.0 Ethernet controller: Broadcom Corporation NetLink BCM5906M Fast Ethernet PCI Express (rev 02)
On Sun, Nov 03, 2013 at 01:43:31PM +0200, Ionut Radu wrote:
Hi,
I have downloaded fedora mate spin and created a liveusb image with livecreator-usb, however I can't boot it, please see the snapshot attached.
Have you checked the checksum of the downloaded image before trying to use it? maybe it's a bad copy...
Also, you can use dd to copy the live image to a usb stick and it boots up fine.
if your intent is to do "install to disk" that is a perfectly good way to do it, VS if you want to actually use (not install it) doing what you did may be better, as it gives some "persistence" for changes you may make.
As for why it fails for you, I'm afraid I ca't help. but trying the simpler 'dd' method may avoid the problem.
Anyway, I've installed several of the beta TCx spins by just using dd to copy to usb stick.
On 03/11/13 15:19, Fred Smith wrote:
On Sun, Nov 03, 2013 at 01:43:31PM +0200, Ionut Radu wrote:
Hi,
I have downloaded fedora mate spin and created a liveusb image with livecreator-usb, however I can't boot it, please see the snapshot attached.
Have you checked the checksum of the downloaded image before trying to use it? maybe it's a bad copy...
Also, you can use dd to copy the live image to a usb stick and it boots up fine.
if your intent is to do "install to disk" that is a perfectly good way to do it, VS if you want to actually use (not install it) doing what you did may be better, as it gives some "persistence" for changes you may make.
As for why it fails for you, I'm afraid I ca't help. but trying the simpler 'dd' method may avoid the problem.
Anyway, I've installed several of the beta TCx spins by just using dd to copy to usb stick.
Thanks Fred, liveusb-creator is automatically checking the checksum of the image and the checksum is good. I didn't want to use dd because I have other data on the usb stick. I've also tried Fedora 19 Live x86_64 but this time CPU#0 stalls.
regards, Ionut Radu.
On 03/11/13 15:19, Fred Smith wrote:
On Sun, Nov 03, 2013 at 01:43:31PM +0200, Ionut Radu wrote:
Hi,
I have downloaded fedora mate spin and created a liveusb image with livecreator-usb, however I can't boot it, please see the snapshot attached.
Have you checked the checksum of the downloaded image before trying to use it? maybe it's a bad copy...
Also, you can use dd to copy the live image to a usb stick and it boots up fine.
if your intent is to do "install to disk" that is a perfectly good way to do it, VS if you want to actually use (not install it) doing what you did may be better, as it gives some "persistence" for changes you may make.
As for why it fails for you, I'm afraid I ca't help. but trying the simpler 'dd' method may avoid the problem.
Anyway, I've installed several of the beta TCx spins by just using dd to copy to usb stick.
I've tried with dd too. I get the same error but for CPU#0.
-
Fred Smith -
Ionut Radu