RE: Linksys 54g Support - PLEASE!

[Callahan, Michael]

Nope, you can't. Never mind.  If this was using the Prism chipset it might
be possible, but since it is using Broadcom you're stuck with ndiswrapper
for now.  I'll add my voice to yours, since I have one of these cards too.
It is currently in my Windows laptop but I'd like to be able to use it on
Linux. 

-----Original Message-----
From: Callahan, Michael [mailto:[e-mail]] 
Sent: Thursday, June 30, 2005 10:21 PM
To: ryanag(a)zoominternet.net; For users of Fedora Core releases
Subject: RE: Linksys 54g Support - PLEASE!

I do believe you can get a working driver here:

http://www.linux-wlan.org/ 

-----Original Message-----
From: Ryan [mailto:[e-mail]]
Sent: Thursday, June 30, 2005 8:29 PM
To: For users of Fedora Core releases
Subject: Re: Linksys 54g Support - PLEASE!

You really should write Linksys asking for their help, and indicate that
future purchases will be influenced by driver support.

On Thu, 2005-06-30 at 22:28 +0200, Alexander Dalloz wrote:
>  
>  
>  > Isn't there a guru out there... someone out there... that can PLEASE 
>  > write a FC4 driver and config to support my poor little Linksys 54G 
>  > card that has been sitting on a shelf ever since I switched 
--
fedora-list mailing list
fedora-list(a)redhat.com
To unsubscribe: http://www.redhat.com/mailman/listinfo/fedora-list

**********    Confidentiality Notice    **********
This electronic transmission and any attached documents or other writings
are confidential and are for the sole use of the intended
recipient(s) identified above. This message may contain information that is
privileged, confidential or otherwise protected from disclosure under
applicable law. If the receiver of this information is not the intended
recipient, or the employee, or agent responsible for delivering the
information to the intended recipient, you are hereby notified that any use,
reading, dissemination, distribution, copying or storage of this information
is strictly prohibited. If you have received this information in error,
please notify the sender by return email and delete the electronic
transmission, including all attachments from your system.

--
fedora-list mailing list
fedora-list(a)redhat.com
To unsubscribe: http://www.redhat.com/mailman/listinfo/fedora-list

**********    Confidentiality Notice    **********
This electronic transmission and any attached documents or other
writings are confidential and are for the sole use of the intended
recipient(s) identified above. This message may contain information
that is privileged, confidential or otherwise protected from disclosure
under applicable law. If the receiver of this information is not the
intended recipient, or the employee, or agent responsible for delivering
the information to the intended recipient, you are hereby notified that
any use, reading, dissemination, distribution, copying or storage of this
information is strictly prohibited. If you have received this information in
error, please notify the sender by return email and delete the electronic
transmission, including all attachments from your system.

Linksys 54g Support - PLEASE!

[Albert Hawker]

I already sent Linksys a message... and I wined the best I could!

Thanks for the help...

On Thu, 2005-06-30 at 22:52 -0500, Callahan, Michael wrote:

>  Nope, you can't. Never mind.  If this was using the Prism chipset
> it might
>  be possible, but since it is using Broadcom you're stuck with ndiswrapper
>  for now.  I'll add my voice to yours, since I have one of these cards too.
>  It is currently in my Windows laptop but I'd like to be able to use it on
>  Linux. 
>  
>  -----Original Message-----
>  From: Callahan, Michael [mailto:[e-mail]] 
>  Sent: Thursday, June 30, 2005 10:21 PM
>  To: ryanag(a)zoominternet.net; For users of Fedora Core releases
>  Subject: RE: Linksys 54g Support - PLEASE!
>  
>  I do believe you can get a working driver here:
>  
>  http://www.linux-wlan.org/ 
>  
>  -----Original Message-----
>  From: Ryan [mailto:[e-mail]]
>  Sent: Thursday, June 30, 2005 8:29 PM
>  To: For users of Fedora Core releases
>  Subject: Re: Linksys 54g Support - PLEASE!
>  
>  You really should write Linksys asking for their help, and indicate that
>  future purchases will be influenced by driver support.
>  
>  On Thu, 2005-06-30 at 22:28 +0200, Alexander Dalloz wrote:
>  > 
>  > 
>  > > Isn't there a guru out there... someone out there... that can PLEASE 
>  > > write a FC4 driver and config to support my poor little Linksys 54G 
>  > > card that has been sitting on a shelf ever since I switched
>  
>  --
>  fedora-list mailing list
>  fedora-list(a)redhat.com
>  To unsubscribe: http://www.redhat.com/mailman/listinfo/fedora-list
>  
>  **********    Confidentiality Notice    **********
>  This electronic transmission and any attached documents or other writings
>  are confidential and are for the sole use of the intended
>  recipient(s) identified above. This message may contain information that is
>  privileged, confidential or otherwise protected from disclosure under
>  applicable law. If the receiver of this information is not the intended
>  recipient, or the employee, or agent responsible for delivering the
>  information to the intended recipient, you are hereby notified that any use,
>  reading, dissemination, distribution, copying or storage of this information
>  is strictly prohibited. If you have received this information in error,
>  please notify the sender by return email and delete the electronic
>  transmission, including all attachments from your system.
>  
>  --
>  fedora-list mailing list
>  fedora-list(a)redhat.com
>  To unsubscribe: http://www.redhat.com/mailman/listinfo/fedora-list
>  
>  **********    Confidentiality Notice    **********
>  This electronic transmission and any attached documents or other
>  writings are confidential and are for the sole use of the intended
>  recipient(s) identified above. This message may contain information
>  that is privileged, confidential or otherwise protected from disclosure
>  under applicable law. If the receiver of this information is not the
>  intended recipient, or the employee, or agent responsible for delivering
>  the information to the intended recipient, you are hereby notified that
>  any use, reading, dissemination, distribution, copying or storage of this
>  information is strictly prohibited. If you have received this information in
>  error, please notify the sender by return email and delete the electronic
>  transmission, including all attachments from your system.
>

Linksys 54g Support - PLEASE!

[Mike McCarty]

Albert Hawker wrote:

>  I already sent Linksys a message... and I wined the best I could!
>
>  Thanks for the help... 
[snip]

> >**********    Confidentiality Notice    **********
> >This electronic transmission and any attached documents or other
> >writings are confidential and are for the sole use of the intended
> >recipient(s) identified above. This message may contain information
> >that is privileged, confidential or otherwise protected from disclosure
> >under applicable law. If the receiver of this information is not the
> >intended recipient, or the employee, or agent responsible for delivering
> >the information to the intended recipient, you are hereby notified that
> >any use, reading, dissemination, distribution, copying or storage of this
> >information is strictly prohibited. If you have received this information in
> >error, please notify the sender by return email and delete the electronic
> >transmission, including all attachments from your system.
> >    
> > 
I want to know whether I am an intended recipient, and whether I need to
delete this message.

Mike

-- 
p="p=%c%s%c;main(){printf(p,34,p,34);}";main(){printf(p,34,p,34);}
This message made from 100% recycled bits.
I can explain it for you, but I can't understand it for you.
I speak only for myself, and I am unanimous in that!