[OT] routing

[hicham]

Hello
 I have some basic questions on some network and routing issue

I need to setup two pc 's A and B acting  as  gateways
( running on Fedora )
assigned ip adress 10.3.5.223 for pc A  and 10.3.4.225 for pc B
connected to a private lan network 10.3.0.0
now the subnet for the gateway A is a network 10.10.1.0 / 24 , gateway
A in this subnet got ip address 10.10.1.1
and subnet for gateway B is a network 10.20.1.0/24, gateway B ip
address is 10.20.1.1

now I need to get a pc in subnet 10.10.1.0 / 24, communicate with a pc
in subnet 10.20.1.0/24, How do I achieve that ? thru a routing table
right ?

what do I need to fill in my route table in system-config-network ?

Thanks for replying

hicham

[sysadmin]

hicham said:
>  Hello I have some basic questions on some network and routing issue
>  
>  I need to setup two pc 's A and B acting  as  gateways ( running on Fedora
>  ) assigned ip adress 10.3.5.223 for pc A  and 10.3.4.225 for pc B connected
>  to a private lan network 10.3.0.0 now the subnet for the gateway A is a
>  network 10.10.1.0 / 24 , gateway A in this subnet got ip address 10.10.1.1
>   and subnet for gateway B is a network 10.20.1.0/24, gateway B ip address
>  is 10.20.1.1
>  
>  now I need to get a pc in subnet 10.10.1.0 / 24, communicate with a pc in
>  subnet 10.20.1.0/24, How do I achieve that ? thru a routing table right? 
Why don't you use two NICs on both PCs..one NIC to have an IP from 10.10.1.0/24 subnet
and the 2nd NIC to ave an IP from 10.20.1.0/24 subnet and vice-versa..

Alternatively you could do IP aliasing..

>  
>  what do I need to fill in my route table in system-config-network ?
>  
>  Thanks for replying
>  
>  hicham
>  
>  -- fedora-list mailing list fedora-list(a)redhat.com To unsubscribe:
>  https://www.redhat.com/mailman/listinfo/fedora-list
>   

----------------------------------------------------------------------------
David Maina.
Systems/Network Administrator.
PdE-Kenya.
P. O. Box 1239 - 20100.
Nakuru, Kenya.
Telephone:[phone]/850333.
Cell:[phone].
Registered Linux User #407239.
----------------------------------------------------------------------------
"By golly, I'm beginning to think Linux really *is* the best thing since sliced
bread."

[Neil Cherry]

>  hicham said:
> > Hello I have some basic questions on some network and routing issue
> >
> > I need to setup two pc 's A and B acting  as  gateways ( running on Fedora
> > ) assigned ip adress 10.3.5.223 for pc A  and 10.3.4.225 for pc B connected
> > to a private lan network 10.3.0.0 now the subnet for the gateway A is a
> > network 10.10.1.0 / 24 , gateway A in this subnet got ip address 10.10.1.1
> >  and subnet for gateway B is a network 10.20.1.0/24, gateway B ip address
> > is 10.20.1.1
> >
> > now I need to get a pc in subnet 10.10.1.0 / 24, communicate with a pc in
> > subnet 10.20.1.0/24, How do I achieve that ? thru a routing table right? 
> > what do I need to fill in my route table in system-config-network
> ? 
I'm afraid I only know how to do this manually. You can either
use Quagga (seems like overkill for just 2 routes) or static
routes. Make up a diagram of your network and label everything
properly so we can figure out exactly what you need. Simple ASCII
art is fine. You don't have to use the real IP addresses but if
you are traversing the Internet lets us know as that will require
different tools (possibly).

-- 
Linux Home Automation         Neil Cherry       ncherry(a)linuxha.com
http://www.linuxha.com/                         Main site
http://linuxha.blogspot.com/                    My HA Blog
http://home.comcast.net/~ncherry/               Backup site

[Eric Brunson]

hicham wrote:
>  Hello
>  I have some basic questions on some network and routing issue
>
>  I need to setup two pc 's A and B acting  as  gateways
>  ( running on Fedora )
>  assigned ip adress 10.3.5.223 for pc A  and 10.3.4.225 for pc B
>  connected to a private lan network 10.3.0.0
>  now the subnet for the gateway A is a network 10.10.1.0 / 24 , gateway
>  A in this subnet got ip address 10.10.1.1
>  and subnet for gateway B is a network 10.20.1.0/24, gateway B ip
>  address is 10.20.1.1 
I'm assuming pc B is supposed to be in network B?  You
aren't very clear
and you picked horrible network numbers.  From what I can see, neither
of the PC's is actually in either of your networks.  With a netmask of
/24, all pcs in network A would need addresses that start with 10.10.1
and network B would need 10.20.1.  Plus, gateways for any subnet need to
be in the same subnet of the PC's they are routing for.

>  now I need to get a pc in subnet 10.10.1.0 / 24, communicate with a pc
>  in subnet 10.20.1.0/24, How do I achieve that ? thru a routing table
>  right ? 
Without a router with an interface (physical or virtual) on each
network, two devices can't talk to each other.  That's the bottom line. 
You can only talk directly to a device on your own network, if a device
is not on your network, then you have to talk to a gateway (router) that
is on your own network.
>  what do I need to fill in my route table in system-config-network ? 
So, if you have
two PCs that are on the same ethernet segment, but with
different IP networks, then you either have to have a router on that
ethernet segment, or plumb multiple IP addresses on each PC so they are
on the same networks.

Hopefully that makes sense.  If you need more help, just send more
information.
>  Thanks for replying
>
>  hicham
>