On 05/29/2015 12:25 PM, birger wrote:
>
> Can you find any hints here? This describes installing the vendor
> driver. The usb vendor and product ids are the same, so yours ought
> to be the same as this.
>
http://superuser.com/questions/738096/how-to-install-mediatek-mt7610u-rt2...
>
>
> Maintaining a driver manually sucks, but it may help until the open
> source driver works for your dongle.
>
> Sendt fra min Sony Xperia™-smarttelefon
>
>
>
> ---- jd1008 skrev ----
>
>
> I finally received the item.
> I plugged it in and kernel recognizes it as:
> [ 174.952769 <tel:174.952769>] usb 2-2: USB disconnect, device number 3
> [ 192.344054 <tel:192.344054>] usb 2-2: new high-speed USB device
> number 5 using ehci-pci
> [ 192.473984 <tel:192.473984>] usb 2-2: New USB device found,
> idVendor=0e8d, idProduct=7610
> [ 192.473989 <tel:192.473989>] usb 2-2: New USB device strings:
> Mfr=1, Product=2,
> SerialNumber=3
> [ 192.473993 <tel:192.473993>] usb 2-2: Product: WiFi
> [ 192.473996 <tel:192.473996>] usb 2-2: Manufacturer: MediaTek
> [ 192.473999 <tel:192.473999>] usb 2-2: SerialNumber: 1.0
>
> And since the file
> drivers/net/wireless/rt2x00/Kconfig
>
> has the following config line:
> config RT2800USB_RT55XX
> bool "rt2800usb - Include support for rt55xx devices (EXPERIMENTAL)"
> ---help---
> This adds support for rt55xx wireless chipset family to the
> rt2800usb driver.
> Supported chips: RT5572
>
> So, I ran modprobe rt2800usb which loaded:
> # lsmod | grep 2800
> rt2800usb 28672 <tel:28672> 0
> rt2x00usb 20480 <tel:20480> 1 rt2800usb
> rt2800lib 94208 <tel:94208> 1 rt2800usb
> rt2x00lib 69632 <tel:69632> 3 rt2x00usb,rt2800lib,rt2800usb
> crc_ccitt 16384 <tel:16384> 1 rt2800lib
> mac80211 704512 <tel:704512> 4 rt2x00lib,rt2x00usb,rt2800lib,iwldvm
>
> However, iwconfig does not show the interface.
>
> How do I get there from here ? :) :)
Thank you Birger.
I downloaded the files mentioned in those tips.
Bet before I build the Ralink provided driver, I
will recompile the fedora kernel from source
and enable the Experimental driver which supports
RT5572, and try that out.
If it does not work, I will fall back on recompiling
the driver your link led me to.
Kind regards,
JD
I did try to compile the manufacturer's supplied driver,
but compilation fails miserably.
I uploaded the very verbose output of
make -B --debug=vj -j 4 -k
to