X11 connection rejected

[Patrick Dupre]

Hello,

On a machine I can ssh -X and run xclock for example, but
 sudo system-config-users
gives

(process:5034): Gtk-WARNING **: 14:59:07.212: Locale not supported by C library.
	Using the fallback 'C' locale.
X11 connection rejected because of wrong authentication.
system-config-users requires a currently running X server.
GtkWarning: 'could not open display'


Is there a solution?

Thanks
===========================================================================
 Patrick DUPRÉ                                 | | email: pdupre(a)gmx.com
 Laboratoire interdisciplinaire Carnot de Bourgogne
 9 Avenue Alain Savary, BP 47870, 21078 DIJON Cedex FRANCE
 Tel: [phone]
===========================================================================

[Rex Dieter]

Patrick Dupre wrote:

>  Hello,
>  
>  On a machine I can ssh -X and run xclock for example, but
>   sudo system-config-users
>  gives
>  
>  (process:5034): Gtk-WARNING **: 14:59:07.212: Locale not supported by C
>  library. Using the fallback 'C' locale.
>  X11 connection rejected because of wrong authentication.
>  system-config-users requires a currently running X server.
>  GtkWarning: 'could not open display'
>  
>  
>  Is there a solution? 
1.  system-config-users already has it's own method to elevate privilege, so 
no need for sudo

2.  ssh root@host system-config-users

[Patrick Dupre]

===========================================================================
 Patrick DUPRÉ                                 | | email: pdupre(a)gmx.com
 Laboratoire interdisciplinaire Carnot de Bourgogne
 9 Avenue Alain Savary, BP 47870, 21078 DIJON Cedex FRANCE
 Tel: [phone]
===========================================================================

>  > On a machine I can ssh -X and run xclock for example, but
>  >  sudo system-config-users
>  > gives
>  > 
>  > (process:5034): Gtk-WARNING **: 14:59:07.212: Locale not supported by C
>  > library. Using the fallback 'C' locale.
>  > X11 connection rejected because of wrong authentication.
>  > system-config-users requires a currently running X server.
>  > GtkWarning: 'could not open display'
>  > 
>  > 
>  > Is there a solution?
>  
>  1.  system-config-users already has it's own method to elevate privilege, so 
>  no need for sudo 
When logged:
$ system-config-users 
Error executing command as another user: Not authorized

$ sudo system-config-users 
X11 connection rejected because of wrong authentication.
system-config-users requires a currently running X server.
GtkWarning: 'could not open display'


>  2.  ssh root@host system-config-users 
ssh pdupre(a)192.168.14.154
system-config-users
Error executing command as another user: Not authorized
This incident has been reported.

ssh -X pdupre(a)192.168.14.154 system-config-users
pdupre(a)192.168.14.154's password: 
Error executing command as another user: Not authorized
This incident has been reported

ssh -X root(a)192.168.14.154 system-config-users
as for a root password.
There is no root.
Do I need to create a root user?


> _______________________________________________
> users mailing list -- users(a)lists.fedoraproject.org
> To unsubscribe send an email to users-leave(a)lists.fedoraproject.org
> Fedora Code of Conduct:
https://docs.fedoraproject.org/en-US/project/code-of-conduct/
> List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines
> List Archives:
https://lists.fedoraproject.org/archives/list/[e-mail]
>

[Ed Greshko]

On 2020-02-07 19:02, Patrick Dupre wrote:
>  ===========================================================================
>   Patrick DUPRÉ                                 | | email: pdupre(a)gmx.com
>   Laboratoire interdisciplinaire Carnot de Bourgogne
>   9 Avenue Alain Savary, BP 47870, 21078 DIJON Cedex FRANCE
>   Tel: [phone]
>  ===========================================================================
>
> >> On a machine I can ssh -X and run xclock for example, but
> >>  sudo system-config-users
> >> gives
> >>
> >> (process:5034): Gtk-WARNING **: 14:59:07.212: Locale not supported by C
> >> library. Using the fallback 'C' locale.
> >> X11 connection rejected because of wrong authentication.
> >> system-config-users requires a currently running X server.
> >> GtkWarning: 'could not open display'
> >>
> >>
> >> Is there a solution?
> > 1.  system-config-users already has it's own method to elevate privilege, so 
> > no need for sudo
>  When logged:
>  $ system-config-users 
>  Error executing command as another user: Not authorized
>
>  $ sudo system-config-users 
>  X11 connection rejected because of wrong authentication.
>  system-config-users requires a currently running X server.
>  GtkWarning: 'could not open display'
>
>
> > 2.  ssh root@host system-config-users
>  ssh pdupre(a)192.168.14.154 system-config-users
>  Error executing command as another user: Not authorized
>  This incident has been reported.
>
>  ssh -X pdupre(a)192.168.14.154 system-config-users
>  pdupre(a)192.168.14.154's password: 
>  Error executing command as another user: Not authorized
>  This incident has been reported
>
>  ssh -X root(a)192.168.14.154 system-config-users
>  as for a root password.
>  There is no root.
>  Do I need to create a root user?
>  
Seriously, you need to supply more information than you've revealed thus far.

What version of Fedora are you running on the system you which to ssh to?

Can you do the most basic?  "ssh root(a)192.168.14.154"  ?

If you are logged into the 192.168.14.154 can you "su -"?


-- 
The key to getting good answers is to ask good questions.

[Patrick Dupre]

===========================================================================
 Patrick DUPRÉ                                 | | email: pdupre(a)gmx.com
 Laboratoire interdisciplinaire Carnot de Bourgogne
 9 Avenue Alain Savary, BP 47870, 21078 DIJON Cedex FRANCE
 Tel: [phone]
===========================================================================

>  >>> (process:5034): Gtk-WARNING **: 14:59:07.212: Locale not
> supported by C
>  >>> library. Using the fallback 'C' locale.
>  >>> X11 connection rejected because of wrong authentication.
>  >>> system-config-users requires a currently running X server.
>  >>> GtkWarning: 'could not open display'
>  >>>
>  >>>
>  >>> Is there a solution?
>  >> 1.  system-config-users already has it's own method to elevate privilege, so
>
>  >> no need for sudo
>  > When logged:
>  > $ system-config-users 
>  > Error executing command as another user: Not authorized
>  >
>  > $ sudo system-config-users 
>  > X11 connection rejected because of wrong authentication.
>  > system-config-users requires a currently running X server.
>  > GtkWarning: 'could not open display'
>  >
>  >
>  >> 2.  ssh root@host system-config-users
>  > ssh pdupre(a)192.168.14.154 system-config-users
>  > Error executing command as another user: Not authorized
>  > This incident has been reported.
>  >
>  > ssh -X pdupre(a)192.168.14.154 system-config-users
>  > pdupre(a)192.168.14.154's password: 
>  > Error executing command as another user: Not authorized
>  > This incident has been reported
>  >
>  > ssh -X root(a)192.168.14.154 system-config-users
>  > as for a root password.
>  > There is no root.
>  > Do I need to create a root user?
>  >
>  
>  Seriously, you need to supply more information than you've revealed thus far.
>  
>  What version of Fedora are you running on the system you which to ssh to? 
Linux
Eschyle 5.4.17-100.fc30.x86_64 #1 SMP Sat Feb 1 19:15:35 UTC 2020 x86_64 x86_64 x86_64
GNU/Linux
>  
>  Can you do the most basic?  "ssh root(a)192.168.14.154"  ?
>  
>  If you are logged into the 192.168.14.154 can you "su -"?
>   
I did not create any root on this machine. Do I need to do it?
All root connections fail (from he machine of from remote).



> -- 
> The key to getting good answers is to ask good questions.
> _______________________________________________
> users mailing list -- users(a)lists.fedoraproject.org
> To unsubscribe send an email to users-leave(a)lists.fedoraproject.org
> Fedora Code of Conduct:
https://docs.fedoraproject.org/en-US/project/code-of-conduct/
> List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines
> List Archives:
https://lists.fedoraproject.org/archives/list/[e-mail]
>

[Ed Greshko]

On 2020-02-08 02:16, Patrick Dupre wrote:
>  I did not create any root on this machine. Do I need to do it?
>  All root connections fail (from he machine of from remote). 
I believe that starting with the installed of Fedora Workstation F30 the root account is
created but disabled.  There is no root password.

So, you have to login to the system with the account you've designated as an
administrator
and then give it a password.  I think, based on what you've said, that account is
pdupre.

So.....

ssh pdupre@whateverhost

then

sudo passwd root


-- 
The key to getting good answers is to ask good questions.

[Patrick Dupre]

I tried to log in root with my passwd (administrator), but without
success. I will try again.

===========================================================================
 Patrick DUPRÉ                                 | | email: pdupre(a)gmx.com
 Laboratoire interdisciplinaire Carnot de Bourgogne
 9 Avenue Alain Savary, BP 47870, 21078 DIJON Cedex FRANCE
 Tel: [phone]
===========================================================================


>
> On 2020-02-08 02:16, Patrick Dupre wrote:
> > I did not create any root on this machine. Do I need to do it?
> > All root connections fail (from he machine of from remote).
> 
> I believe that starting with the installed of Fedora Workstation F30 the root account
is
> created but disabled.  There is no root password.
> 
> So, you have to login to the system with the account you've designated as an
administrator
> and then give it a password.  I think, based on what you've said, that account is
pdupre.
> 
> So.....
> 
> ssh pdupre@whateverhost
> 
> then
> 
> sudo passwd root
> 
> 
> -- 
> The key to getting good answers is to ask good questions.
> _______________________________________________
> users mailing list -- users(a)lists.fedoraproject.org
> To unsubscribe send an email to users-leave(a)lists.fedoraproject.org
> Fedora Code of Conduct:
https://docs.fedoraproject.org/en-US/project/code-of-conduct/
> List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines
> List Archives:
https://lists.fedoraproject.org/archives/list/[e-mail]
>

[Ed Greshko]

On 2020-02-08 05:23, Patrick Dupre wrote:
>  I tried to log in root with my passwd (administrator), but without
>  success. I will try again. 
That isn't what I suggested you do.....

I indicated you should login as yourself.  Then "sudo passwd root" to give the
root user account
a password.

Then to test do "su -" to become root.

-- 
The key to getting good answers is to ask good questions.

[George N. White III]

On Thu, 6 Feb 2020 at 16:02, Patrick Dupre <pdupre(a)gmx.com&gt; wrote:

>  Hello,
>
>  On a machine I can ssh -X and run xclock for example, but
>   sudo system-config-users
>  gives
>
>  (process:5034): Gtk-WARNING **: 14:59:07.212: Locale not supported by C
>  library.
>          Using the fallback 'C' locale.
>  X11 connection rejected because of wrong authentication.
>  system-config-users requires a currently running X server.
>  GtkWarning: 'could not open display'
>
>
>  Is there a solution?
>  
Either become a maintainer and fix system-config-users find another GUI
tool.

bugzilla <https://bugzilla.redhat.com/show_bug.cgi?id=1778407> says:

This package was removed from Fedora [31] as there was no active
maintainer and the code failed to build (bug 1676111
<https://bugzilla.redhat.com/show_bug.cgi?id=1676111>).

If you like to see this package in Fedora please consider becoming a
Fedora maintainer. See
https://fedoraproject.org/wiki/Orphaned_package_that_need_new_maintainers...
for further information.

For decades I have been using simple scripts calling commnd-line tools
(e.g., useradd on Fedora 31)
with arguments customized for the user id's, groups, etc. defined for a
particular site.   This has worked
for me on Sun, SGI, NeXT, RHEL, Debian, Gentoo, Fedora, Ubunto, Mint, and
others.


>  Thanks
>  ===========================================================================
>   Patrick DUPRÉ                                 | | email: pdupre(a)gmx.com
>   Laboratoire interdisciplinaire Carnot de Bourgogne
>   9 Avenue Alain Savary, BP 47870, 21078 DIJON Cedex FRANCE
>   Tel: [phone]
>  ===========================================================================
>  _______________________________________________
>  users mailing list -- users(a)lists.fedoraproject.org
>  To unsubscribe send an email to users-leave(a)lists.fedoraproject.org
>  Fedora Code of Conduct:
>  https://docs.fedoraproject.org/en-US/project/code-of-conduct/
>  List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines
>  List Archives:
>  https://lists.fedoraproject.org/archives/list/[e-mail]
>  

-- 
George N. White III