I get the following error whenever I boot into Kernel 2.6.14-1.1637 or the just released 2.6.14-1.1644:
Decompressing Linux...done. Booting the kernel. PCI: Cannot allocate resource region 4 of device 0000:00:06.0 PCI: Cannot allocate resource region 4 of device 0000:00:08.0 PCI: Cannot allocate resource region 4 of device 0000:01:00.0 PCI: Failed to allocate I/O resource #4:4000@10000 for 0000:00:08.0 PCI: Error while updating region 0000:00:06.0/4 (00001001 != 0000f001) PCI: Failed to allocate mem resource #1:40000000@c0000000 for 0000:01:00.0
My system is a AMD Athlon 64 3000+ CPU installed in a Asus K8N4-E Deluxe motherboard with an Asus GeForce 6200 PCIe video card. I also have an Intel Pro 100 PCI network card installed. Has anyone else run into this issue?
-Ubence
On Tue, Nov 29, 2005 at 06:29:03PM -0800, Ubence Quevedo wrote:
I get the following error whenever I boot into Kernel 2.6.14-1.1637 or the just released 2.6.14-1.1644:
Decompressing Linux...done. Booting the kernel. PCI: Cannot allocate resource region 4 of device 0000:00:06.0 PCI: Cannot allocate resource region 4 of device 0000:00:08.0 PCI: Cannot allocate resource region 4 of device 0000:01:00.0 PCI: Failed to allocate I/O resource #4:4000@10000 for 0000:00:08.0 PCI: Error while updating region 0000:00:06.0/4 (00001001 != 0000f001) PCI: Failed to allocate mem resource #1:40000000@c0000000 for 0000:01:00.0
My system is a AMD Athlon 64 3000+ CPU installed in a Asus K8N4-E Deluxe motherboard with an Asus GeForce 6200 PCIe video card. I also have an Intel Pro 100 PCI network card installed. Has anyone else run into this issue?
Can you remove the 'quiet' from the boot command line, and see what the last few lines it mentions are ?
Dave
With Kernel 2.6.13-1.1532_FC4, below [snipped from /var/log/Messages] is reported at about the time at boot
Nov 29 18:19:46 fc4-64 kernel: NFORCE-CK804: IDE controller at PCI slot 0000:00:06.0 Nov 29 18:19:46 fc4-64 kernel: NFORCE-CK804: chipset revision 242 Nov 29 18:19:46 fc4-64 kernel: NFORCE-CK804: not 100% native mode: will probe irqs later Nov 29 18:19:46 fc4-64 kernel: NFORCE-CK804: BIOS didn't set cable bits correctly. Enabling workaround. Nov 29 18:19:46 fc4-64 kernel: NFORCE-CK804: BIOS didn't set cable bits correctly. Enabling workaround. Nov 29 18:19:46 fc4-64 kernel: NFORCE-CK804: 0000:00:06.0 (rev f2) UDMA133 controller Nov 29 18:19:46 fc4-64 kernel: ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA Nov 29 18:19:46 fc4-64 kernel: ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA Nov 29 18:19:46 fc4-64 kernel: hda: ST320011A, ATA DISK drive Nov 29 18:19:46 fc4-64 kernel: hdb: SONY CD-RW CRX230ED, ATAPI CD/DVD- ROM drive Nov 29 18:19:46 fc4-64 kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Nov 29 18:19:46 fc4-64 kernel: hdc: ST360020A, ATA DISK drive Nov 29 18:19:46 fc4-64 kernel: hdd: IC35L080AVVA07-0, ATA DISK drive Nov 29 18:19:47 fc4-64 kernel: ide1 at 0x170-0x177,0x376 on irq 15 Nov 29 18:19:47 fc4-64 kernel: hda: max request size: 128KiB Nov 29 18:19:47 fc4-64 kernel: hda: 39102336 sectors (20020 MB) w/ 2048KiB Cache, CHS=38792/16/63, UDMA(100) Nov 29 18:19:47 fc4-64 kernel: hda: cache flushes not supported Nov 29 18:19:47 fc4-64 kernel: hda: hda1 hda2 hda3
With removing the quiet from grub for both Kernel 2.6.14-1.1637 and 2.6.14-1.1644, I get the following:
NFORCE-CK804: IDE controller at PCI slot 0000:00:06.0 NFORCE-CK804: chipset revision 242 NFORCE-CK804: not 100% native mode: will probe irqs later NFORCE-CK804: BIOS didn't set cable bits correctly. Enabling workaround. NFORCE-CK804: BIOS didn't set cable bits correctly. Enabling workaround. NFORCE-CK804: 0000:00:06.0 (rev f2) UDMA133 controller ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA NFORCE-CK804 simplex device: DMA disabled ide1: NFORCE-CK804 Bus-Master DMA disabled (BIOS) hda: ST320011A, ATA DISK drive hdb: SONY CD-RW CRX230ED, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hdc: ST360020A, ATA DISK drive hdd: IC35L080AVVA07-0, ATA DISK drive ide1 at 0x170-0x177,0x376 on irq 15 hda: max request size: 128KiB hda: 39102336 sectors (20020 MB) w/2048KiB Cache, CHS=38792/16/63, UDMA(100) hda: cach flushes not supported hda:<4>hda: dma_timer_expiry: dma status == 0xff hda: dma_timer_expiry: dma status == 0xff hda: dma_timer_expiry: dma status == 0xff hda: dma_timer_expiry: dma status == 0xff hda: dma_timer_expiry: dma status == 0xff . . .
Looks like it has something to do with the secondary onboard IDE controller? I'm running FC4_64 if that helps as well.
-Ubence
On Nov 30, 2005, at 09:57 AM, Dave Jones wrote:
On Tue, Nov 29, 2005 at 06:29:03PM -0800, Ubence Quevedo wrote:
I get the following error whenever I boot into Kernel 2.6.14-1.1637 or the just released 2.6.14-1.1644:
Decompressing Linux...done. Booting the kernel. PCI: Cannot allocate resource region 4 of device 0000:00:06.0 PCI: Cannot allocate resource region 4 of device 0000:00:08.0 PCI: Cannot allocate resource region 4 of device 0000:01:00.0 PCI: Failed to allocate I/O resource #4:4000@10000 for 0000:00:08.0 PCI: Error while updating region 0000:00:06.0/4 (00001001 != 0000f001) PCI: Failed to allocate mem resource #1:40000000@c0000000 for 0000:01:00.0
My system is a AMD Athlon 64 3000+ CPU installed in a Asus K8N4-E Deluxe motherboard with an Asus GeForce 6200 PCIe video card. I also have an Intel Pro 100 PCI network card installed. Has anyone else run into this issue?
Can you remove the 'quiet' from the boot command line, and see what the last few lines it mentions are ?
Dave-- fedora-list mailing list fedora-list@redhat.com To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
-
Dave Jones -
Ubence Quevedo