Hello,
Here is my USB modem: Bus 001 Device 005: ID 1bbb:0017 T & A Mobile Phones
Here are the fedora 20 file /etc/usb_modeswitch.d/1bbb:f000 # Alcatel X200/X200L/X060S, Archos G9 3G Key TargetVendor= 0x1bbb TargetProductList="0000,0017,00b7" MessageContent="55534243123456788000000080000606f50402527000000000000000000000"
and fedora 22 /etc/usb_modeswitch.d/1bbb:f000 # Alcatel X200/X200L/X060S/L100V, Archos G9 3G Key TargetVendor=0x1bbb TargetProductList="0000,0017,00b7,011e,0191,0195" MessageContent="55534243123456788000000080000606f50402527000000000000000000000"
I do not see much difference.
How should I run usb_modeswitch? manually or is it a daemon?
Thank for your help.
=========================================================================== Patrick DUPRÉ | | email: pdupre@gmx.com Laboratoire de Physico-Chimie de l'Atmosphère | | Université du Littoral-Côte d'Opale | | Tel. (33)-(0)3 28 23 76 12 | | Fax: 03 28 65 82 44 189A, avenue Maurice Schumann | | 59140 Dunkerque, France ===========================================================================
I would like to get some help on this issue.
Here are the mmcli in Fedora 20 /org/freedesktop/ModemManager1/Modem/0 (device id '4e4f258144d47542008fa77aaf6bd481f2ca0f09') ------------------------- Hardware | manufacturer: 'TCT Mobile International Limited' | model: 'HSPA+ Data Card' | revision: 'GX120K00XX' | supported: 'gsm-umts' | current: 'gsm-umts' | equipment id: '356698042474859' ------------------------- System | device: '/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-6' | drivers: 'option1' | plugin: 'X22X' | primary port: 'ttyUSB4' | ports: 'ttyUSB3 (at), ttyUSB4 (at)' ------------------------- Numbers | own : 'unknown' ------------------------- Status | lock: 'none' | unlock retries: 'unknown' | state: 'connected' | power state: 'on' | access tech: 'umts' | signal quality: '100' (recent) ------------------------- Modes | supported: 'allowed: 2g; preferred: none | allowed: 3g; preferred: none | allowed: 2g, 3g; preferred: none' | current: 'allowed: any; preferred: none' ------------------------- Bands | supported: 'unknown' | current: 'unknown' ------------------------- IP | supported: 'ipv4' ------------------------- 3GPP | imei: '356698042474859' | enabled locks: 'sim, net-pers' | operator id: '20820' | operator name: 'BOUYGTEL' | registration: 'home' ------------------------- SIM | path: '/org/freedesktop/ModemManager1/SIM/0'
and in fedora 22: /org/freedesktop/ModemManager1/Modem/2 (device id '4e4f258144d47542008fa77aaf6bd481f2ca0f09') ------------------------- Hardware | manufacturer: 'TCT Mobile International Limited' | model: 'HSPA+ Data Card' | revision: 'GX120K00XX' | supported: 'gsm-umts' | current: 'gsm-umts' | equipment id: '356698042474859' ------------------------- System | device: '/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-6' | drivers: 'option1' | plugin: 'X22X' | primary port: 'ttyUSB4' | ports: 'ttyUSB3 (at), ttyUSB4 (at)' ------------------------- Numbers | own : 'unknown' ------------------------- Status | lock: 'sim-pin' | unlock retries: 'unknown' | state: 'locked' | power state: 'on' | access tech: 'unknown' | signal quality: '0' (cached) ------------------------- Modes | supported: 'allowed: any; preferred: none' | current: 'allowed: any; preferred: none' ------------------------- Bands | supported: 'unknown' | current: 'unknown' ------------------------- IP | supported: 'none' ------------------------- SIM | path: '/org/freedesktop/ModemManager1/SIM/2'
------------------------- Bearers | paths: 'none'
How can I unlock the modem?
Thank
Here is my USB modem: Bus 001 Device 005: ID 1bbb:0017 T & A Mobile Phones
Here are the fedora 20 file /etc/usb_modeswitch.d/1bbb:f000 # Alcatel X200/X200L/X060S, Archos G9 3G Key TargetVendor= 0x1bbb TargetProductList="0000,0017,00b7" MessageContent="55534243123456788000000080000606f50402527000000000000000000000"
and fedora 22 /etc/usb_modeswitch.d/1bbb:f000 # Alcatel X200/X200L/X060S/L100V, Archos G9 3G Key TargetVendor=0x1bbb TargetProductList="0000,0017,00b7,011e,0191,0195" MessageContent="55534243123456788000000080000606f50402527000000000000000000000"
I do not see much difference.
How should I run usb_modeswitch? manually or is it a daemon?
Thank for your help.
=========================================================================== Patrick DUPRÉ | | email: pdupre@gmx.com Laboratoire de Physico-Chimie de l'Atmosphère | | Université du Littoral-Côte d'Opale | | Tel. (33)-(0)3 28 23 76 12 | | Fax: 03 28 65 82 44 189A, avenue Maurice Schumann | | 59140 Dunkerque, France =========================================================================== -- users mailing list users@lists.fedoraproject.org To unsubscribe or change subscription options: https://admin.fedoraproject.org/mailman/listinfo/users Fedora Code of Conduct: http://fedoraproject.org/code-of-conduct Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines Have a question? Ask away: http://ask.fedoraproject.org
On 08/04/2015 03:15 PM, Patrick Dupre wrote:
I would like to get some help on this issue.
Here are the mmcli in Fedora 20 /org/freedesktop/ModemManager1/Modem/0 (device id '4e4f258144d47542008fa77aaf6bd481f2ca0f09')
Hardware | manufacturer: 'TCT Mobile International Limited' | model: 'HSPA+ Data Card' | revision: 'GX120K00XX' | supported: 'gsm-umts' | current: 'gsm-umts' | equipment id: '356698042474859'
System | device: '/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-6' | drivers: 'option1' | plugin: 'X22X' | primary port: 'ttyUSB4' | ports: 'ttyUSB3 (at), ttyUSB4 (at)'
Numbers | own : 'unknown'
Status | lock: 'none' | unlock retries: 'unknown' | state: 'connected' | power state: 'on' | access tech: 'umts' | signal quality: '100' (recent)
Modes | supported: 'allowed: 2g; preferred: none | allowed: 3g; preferred: none | allowed: 2g, 3g; preferred: none' | current: 'allowed: any; preferred: none'
Bands | supported: 'unknown' | current: 'unknown'
IP | supported: 'ipv4'
3GPP | imei: '356698042474859' | enabled locks: 'sim, net-pers' | operator id: '20820' | operator name: 'BOUYGTEL' | registration: 'home'
SIM | path: '/org/freedesktop/ModemManager1/SIM/0'
and in fedora 22: /org/freedesktop/ModemManager1/Modem/2 (device id '4e4f258144d47542008fa77aaf6bd481f2ca0f09')
Hardware | manufacturer: 'TCT Mobile International Limited' | model: 'HSPA+ Data Card' | revision: 'GX120K00XX' | supported: 'gsm-umts' | current: 'gsm-umts' | equipment id: '356698042474859'
System | device: '/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-6' | drivers: 'option1' | plugin: 'X22X' | primary port: 'ttyUSB4' | ports: 'ttyUSB3 (at), ttyUSB4 (at)'
Numbers | own : 'unknown'
Status | lock: 'sim-pin' | unlock retries: 'unknown' | state: 'locked' | power state: 'on' | access tech: 'unknown' | signal quality: '0' (cached)
Modes | supported: 'allowed: any; preferred: none' | current: 'allowed: any; preferred: none'
Bands | supported: 'unknown' | current: 'unknown'
IP | supported: 'none'
SIM | path: '/org/freedesktop/ModemManager1/SIM/2'
Bearers | paths: 'none'
How can I unlock the modem?
It looks like you haven't provided the SIM's PIN under F22:
Status | lock: 'sim-pin'
The equivalent line under F20 shows
Status | lock: 'none'
I don't use such a card (I have a Verizon hotspot that I can either use via WiFi or tethered--usually via WiFi).
Here is my USB modem: Bus 001 Device 005: ID 1bbb:0017 T & A Mobile Phones
Here are the fedora 20 file /etc/usb_modeswitch.d/1bbb:f000 # Alcatel X200/X200L/X060S, Archos G9 3G Key TargetVendor= 0x1bbb TargetProductList="0000,0017,00b7" MessageContent="55534243123456788000000080000606f50402527000000000000000000000"
and fedora 22 /etc/usb_modeswitch.d/1bbb:f000 # Alcatel X200/X200L/X060S/L100V, Archos G9 3G Key TargetVendor=0x1bbb TargetProductList="0000,0017,00b7,011e,0191,0195" MessageContent="55534243123456788000000080000606f50402527000000000000000000000"
I do not see much difference.
How should I run usb_modeswitch? manually or is it a daemon?
Thank for your help.
---------------------------------------------------------------------- - Rick Stevens, Systems Engineer, AllDigital ricks@alldigital.com - - AIM/Skype: therps2 ICQ: 226437340 Yahoo: origrps2 - - - - grep me no patterns and I'll tell you no lines - ----------------------------------------------------------------------
Hello,
How can I give it the sim-pin?
In fedora 20, when I plug the modem, it askd me for the PIN, not in fedora 22!
On 08/04/2015 03:15 PM, Patrick Dupre wrote:
I would like to get some help on this issue.
Here are the mmcli in Fedora 20 /org/freedesktop/ModemManager1/Modem/0 (device id '4e4f258144d47542008fa77aaf6bd481f2ca0f09')
Hardware | manufacturer: 'TCT Mobile International Limited' | model: 'HSPA+ Data Card' | revision: 'GX120K00XX' | supported: 'gsm-umts' | current: 'gsm-umts' | equipment id: '356698042474859'
System | device: '/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-6' | drivers: 'option1' | plugin: 'X22X' | primary port: 'ttyUSB4' | ports: 'ttyUSB3 (at), ttyUSB4 (at)'
Numbers | own : 'unknown'
Status | lock: 'none' | unlock retries: 'unknown' | state: 'connected' | power state: 'on' | access tech: 'umts' | signal quality: '100' (recent)
Modes | supported: 'allowed: 2g; preferred: none | allowed: 3g; preferred: none | allowed: 2g, 3g; preferred: none' | current: 'allowed: any; preferred: none'
Bands | supported: 'unknown' | current: 'unknown'
IP | supported: 'ipv4'
3GPP | imei: '356698042474859' | enabled locks: 'sim, net-pers' | operator id: '20820' | operator name: 'BOUYGTEL' | registration: 'home'
SIM | path: '/org/freedesktop/ModemManager1/SIM/0'
and in fedora 22: /org/freedesktop/ModemManager1/Modem/2 (device id '4e4f258144d47542008fa77aaf6bd481f2ca0f09')
Hardware | manufacturer: 'TCT Mobile International Limited' | model: 'HSPA+ Data Card' | revision: 'GX120K00XX' | supported: 'gsm-umts' | current: 'gsm-umts' | equipment id: '356698042474859'
System | device: '/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-6' | drivers: 'option1' | plugin: 'X22X' | primary port: 'ttyUSB4' | ports: 'ttyUSB3 (at), ttyUSB4 (at)'
Numbers | own : 'unknown'
Status | lock: 'sim-pin' | unlock retries: 'unknown' | state: 'locked' | power state: 'on' | access tech: 'unknown' | signal quality: '0' (cached)
Modes | supported: 'allowed: any; preferred: none' | current: 'allowed: any; preferred: none'
Bands | supported: 'unknown' | current: 'unknown'
IP | supported: 'none'
SIM | path: '/org/freedesktop/ModemManager1/SIM/2'
Bearers | paths: 'none'
How can I unlock the modem?
It looks like you haven't provided the SIM's PIN under F22:
Status | lock: 'sim-pin'
The equivalent line under F20 shows
Status | lock: 'none'
I don't use such a card (I have a Verizon hotspot that I can either use via WiFi or tethered--usually via WiFi).
Here is my USB modem: Bus 001 Device 005: ID 1bbb:0017 T & A Mobile Phones
Here are the fedora 20 file /etc/usb_modeswitch.d/1bbb:f000 # Alcatel X200/X200L/X060S, Archos G9 3G Key TargetVendor= 0x1bbb TargetProductList="0000,0017,00b7" MessageContent="55534243123456788000000080000606f50402527000000000000000000000"
and fedora 22 /etc/usb_modeswitch.d/1bbb:f000 # Alcatel X200/X200L/X060S/L100V, Archos G9 3G Key TargetVendor=0x1bbb TargetProductList="0000,0017,00b7,011e,0191,0195" MessageContent="55534243123456788000000080000606f50402527000000000000000000000"
I do not see much difference.
How should I run usb_modeswitch? manually or is it a daemon?
Thank for your help.
- Rick Stevens, Systems Engineer, AllDigital ricks@alldigital.com -
- AIM/Skype: therps2 ICQ: 226437340 Yahoo: origrps2 -
-grep me no patterns and I'll tell you no lines -
-- users mailing list users@lists.fedoraproject.org To unsubscribe or change subscription options: https://admin.fedoraproject.org/mailman/listinfo/users Fedora Code of Conduct: http://fedoraproject.org/code-of-conduct Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines Have a question? Ask away: http://ask.fedoraproject.org
On 08/05/15 15:19, Patrick Dupre wrote:
How can I give it the sim-pin?
In fedora 20, when I plug the modem, it askd me for the PIN, not in fedora 22!
I don't recall if you checked this... What is the output of...
systemctl status ModemManager.service
● ModemManager.service - Modem Manager Loaded: loaded (/usr/lib/systemd/system/ModemManager.service; enabled; vendor preset: enabled) Active: active (running) since Wed 2015-08-05 12:25:44 CEST; 2min 46s ago Main PID: 922 (ModemManager) CGroup: /system.slice/ModemManager.service └─922 /usr/sbin/ModemManager
Warning: Journal has been rotated since unit was started. Log output is incomplete or unavailable.
This the output of mmcli (it is the same from fedora 20 or 22) One difference is about the ppp0 which does not shows up in fedora22
/org/freedesktop/ModemManager1/Modem/0 (device id '4e4f258144d47542008fa77aaf6bd481f2ca0f09') ------------------------- Hardware | manufacturer: 'TCT Mobile International Limited' | model: 'HSPA+ Data Card' | revision: 'GX120K00XX' | supported: 'gsm-umts' | current: 'gsm-umts' | equipment id: '356698042474859' ------------------------- System | device: '/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-3' | drivers: 'option1' | plugin: 'X22X' | primary port: 'ttyUSB4' | ports: 'ttyUSB3 (at), ttyUSB4 (at)' ------------------------- Numbers | own : 'unknown' ------------------------- Status | lock: 'none' | unlock retries: 'unknown' | state: 'connected' | power state: 'on' | access tech: 'umts' | signal quality: '100' (recent) ------------------------- Modes | supported: 'allowed: 2g; preferred: none | allowed: 3g; preferred: none | allowed: 2g, 3g; preferred: none' | current: 'allowed: any; preferred: none' ------------------------- Bands | supported: 'unknown' | current: 'unknown' ------------------------- IP | supported: 'ipv4' ------------------------- 3GPP | imei: '356698042474859' | enabled locks: 'sim, net-pers' | operator id: '20820' | operator name: 'BOUYGTEL' | subscription: 'unknown' | registration: 'home' ------------------------- SIM | path: '/org/freedesktop/ModemManager1/SIM/0'
------------------------- Bearers | paths: '/org/freedesktop/ModemManager1/Bearer/0'
=========================================================================== Patrick DUPRÉ | | email: pdupre@gmx.com Laboratoire de Physico-Chimie de l'Atmosphère | | Université du Littoral-Côte d'Opale | | Tel. (33)-(0)3 28 23 76 12 | | Fax: 03 28 65 82 44 189A, avenue Maurice Schumann | | 59140 Dunkerque, France ===========================================================================
Sent: Wednesday, August 05, 2015 at 11:19 AM From: "Ed Greshko" ed.greshko@greshko.com To: "Community support for Fedora users" users@lists.fedoraproject.org Subject: Re: Mobil Broadband 1bbb:0017
On 08/05/15 15:19, Patrick Dupre wrote:
How can I give it the sim-pin?
In fedora 20, when I plug the modem, it askd me for the PIN, not in fedora 22!
I don't recall if you checked this... What is the output of...
systemctl status ModemManager.service
-- If I wanted a blog or social media I'd go elsewhere -- users mailing list users@lists.fedoraproject.org To unsubscribe or change subscription options: https://admin.fedoraproject.org/mailman/listinfo/users Fedora Code of Conduct: http://fedoraproject.org/code-of-conduct Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines Have a question? Ask away: http://ask.fedoraproject.org
On Wed, 2015-08-05 at 12:38 +0200, Patrick Dupre wrote:
● ModemManager.service - Modem Manager Loaded: loaded (/usr/lib/systemd/system/ModemManager.service; enabled; vendor preset: enabled) Active: active (running) since Wed 2015-08-05 12:25:44 CEST; 2min 46s ago Main PID: 922 (ModemManager) CGroup: /system.slice/ModemManager.service └─922 /usr/sbin/ModemManager
I have seen a similar issue with a Huawei adapter. The problem seems to be that the popup asking for the pin is not shown. I have had it working once or twice. I have not had the time to dig into the cause of the issue due to lack of time.
Kind regards, Louis
On Wed, 2015-08-05 at 12:38 +0200, Patrick Dupre wrote:
● ModemManager.service - Modem Manager Loaded: loaded (/usr/lib/systemd/system/ModemManager.service; enabled; vendor preset: enabled) Active: active (running) since Wed 2015-08-05 12:25:44 CEST; 2min 46s ago Main PID: 922 (ModemManager) CGroup: /system.slice/ModemManager.service └─922 /usr/sbin/ModemManager
I have seen a similar issue with a Huawei adapter. The problem seems to be that the popup asking for the pin is not shown. I have had it working once or twice. I have not had the time to dig into the cause of the issue due to lack of time.
Actually, when I run NetworkManager, nothing happens!
users mailing list users@lists.fedoraproject.org To unsubscribe or change subscription options: https://admin.fedoraproject.org/mailman/listinfo/users Fedora Code of Conduct: http://fedoraproject.org/code-of-conduct Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines Have a question? Ask away: http://ask.fedoraproject.org