Hi,
Please help if you understand networking. I believe something is misconfigured in my system when I use /usr/bin/sytem-config-network.
The network is fine using DHCP and "automatically obtain DNS info from provider" However, it stops when I set it statically.
This is what it shows under /etc/sysconfig/network-scripts/ifcfg-eth0
DEVICE=eth0 BOOTPROTO=dhcp ONBOOT=yes TYPE=Ethernet USERCTL=no PEERDNS=yes IPV6INIT=no NETMASK=************* IPADDR=************* GATEWAY=*************
Using /sbin/ifconfig I get my inet addr, bcast and mask.
Now, if I enter "statically set ip addresses" (in the system-config- network gui) and enter the inet addr, bcast and mask; and stop/restart the network via gui /usr/sbin/system-config-services
then /etc/sysconfig/network-scripts/ifcfg-eth0 is changed to
DEVICE=eth0 BOOTPROTO=none ONBOOT=yes TYPE=Ethernet USERCTL=no PEERDNS=yes IPV6INIT=no NETMASK=************* IPADDR=************* GATEWAY=**********
Note: another difference is that:
Note work set statically [me@home network-scripts]# /sbin/ip route aa.aaa.aaa.0/24 dev vnic0 proto kernel scope link src aa.aaa.aaa.2 bbb.b.ccc.0/2 dev eth0 proto kernel scope link src bbb.b.eee.29
working under dhcp [me@home network-scripts]# /sbin/ip route aa.aaa.aaa.0/24 dev vnic0 proto kernel scope link src aa.aaa.aaa.2 bbb.b.ccc.0/21 dev eth0 proto kernel scope link src bbb.b.eee.29 ddd.ddd.d.d.d dev eth0 scope link default via bbb.b.ccc.1 dev eth0
Help!
Oh last info is that I am using 210.230.70.2 210.230.70.2 rosenet.ne.jp when I set dns statically I think that is right $ nslookup rosenet.ne.jp Server: 210.230.70.2
Shawn
P.S. this is in an attempt to resolve past threads on realtek drivers (not the issue) or lan cards (not the issue)
On Wed, 2006-12-20 at 01:10 +0900, Shawn wrote:
Hi,
Please help if you understand networking. I believe something is misconfigured in my system when I use /usr/bin/sytem-config-network.
The network is fine using DHCP and "automatically obtain DNS info from provider" However, it stops when I set it statically.
This is what it shows under /etc/sysconfig/network-scripts/ifcfg-eth0
DEVICE=eth0 BOOTPROTO=dhcp ONBOOT=yes TYPE=Ethernet USERCTL=no PEERDNS=yes IPV6INIT=no NETMASK=************* IPADDR=************* GATEWAY=*************
Using /sbin/ifconfig I get my inet addr, bcast and mask.
Now, if I enter "statically set ip addresses" (in the system-config- network gui) and enter the inet addr, bcast and mask; and stop/restart the network via gui /usr/sbin/system-config-services
then /etc/sysconfig/network-scripts/ifcfg-eth0 is changed to
DEVICE=eth0 BOOTPROTO=none ONBOOT=yes TYPE=Ethernet USERCTL=no PEERDNS=yes IPV6INIT=no NETMASK=************* IPADDR=************* GATEWAY=**********
Note: another difference is that:
Note work set statically [me@home network-scripts]# /sbin/ip route aa.aaa.aaa.0/24 dev vnic0 proto kernel scope link src aa.aaa.aaa.2 bbb.b.ccc.0/2 dev eth0 proto kernel scope link src bbb.b.eee.29
working under dhcp [me@home network-scripts]# /sbin/ip route aa.aaa.aaa.0/24 dev vnic0 proto kernel scope link src aa.aaa.aaa.2 bbb.b.ccc.0/21 dev eth0 proto kernel scope link src bbb.b.eee.29 ddd.ddd.d.d.d dev eth0 scope link default via bbb.b.ccc.1 dev eth0
Help!
Oh last info is that I am using 210.230.70.2 210.230.70.2 rosenet.ne.jp when I set dns statically I think that is right $ nslookup rosenet.ne.jp Server: 210.230.70.2
Shawn
P.S. this is in an attempt to resolve past threads on realtek drivers (not the issue) or lan cards (not the issue)
DHCP gives the additional routing information (defaut gw) that you'll need to configure manually if you switch to static address. Look for the default gateway field in the network configuration GUI.
- Gilboa
On Tue, 2006-12-19 at 18:23 +0200, Gilboa Davara wrote:
On Wed, 2006-12-20 at 01:10 +0900, Shawn wrote:
Hi,
Please help if you understand networking. I believe something is misconfigured in my system when I use /usr/bin/sytem-config-network.
The network is fine using DHCP and "automatically obtain DNS info from provider" However, it stops when I set it statically.
This is what it shows under /etc/sysconfig/network-scripts/ifcfg-eth0
DEVICE=eth0 BOOTPROTO=dhcp ONBOOT=yes TYPE=Ethernet USERCTL=no PEERDNS=yes IPV6INIT=no NETMASK=************* IPADDR=************* GATEWAY=*************
Using /sbin/ifconfig I get my inet addr, bcast and mask.
Now, if I enter "statically set ip addresses" (in the system-config- network gui) and enter the inet addr, bcast and mask; and stop/restart the network via gui /usr/sbin/system-config-services
then /etc/sysconfig/network-scripts/ifcfg-eth0 is changed to
DEVICE=eth0 BOOTPROTO=none ONBOOT=yes TYPE=Ethernet USERCTL=no PEERDNS=yes IPV6INIT=no NETMASK=************* IPADDR=************* GATEWAY=**********
Note: another difference is that:
Note work set statically [me@home network-scripts]# /sbin/ip route aa.aaa.aaa.0/24 dev vnic0 proto kernel scope link src aa.aaa.aaa.2 bbb.b.ccc.0/2 dev eth0 proto kernel scope link src bbb.b.eee.29
working under dhcp [me@home network-scripts]# /sbin/ip route aa.aaa.aaa.0/24 dev vnic0 proto kernel scope link src aa.aaa.aaa.2 bbb.b.ccc.0/21 dev eth0 proto kernel scope link src bbb.b.eee.29 ddd.ddd.d.d.d dev eth0 scope link default via bbb.b.ccc.1 dev eth0
Help!
Oh last info is that I am using 210.230.70.2 210.230.70.2 rosenet.ne.jp when I set dns statically I think that is right $ nslookup rosenet.ne.jp Server: 210.230.70.2
Shawn
P.S. this is in an attempt to resolve past threads on realtek drivers (not the issue) or lan cards (not the issue)
DHCP gives the additional routing information (defaut gw) that you'll need to configure manually if you switch to static address. Look for the default gateway field in the network configuration GUI.
Yeah I did, I think. the default gateway field was set. I called it bcast in my mail because that is what is said under /sbin/ifconfig.
No? If not, where can I find my default gw. Ie what command can I run?
I was assumming the Bcast was it.
Shawn
Hi,
DHCP gives the additional routing information (defaut gw) that you'll need to configure manually if you switch to static address. Look for the default gateway field in the network configuration GUI.
Yeah I did, I think. the default gateway field was set. I called it bcast in my mail because that is what is said under /sbin/ifconfig.
No? If not, where can I find my default gw. Ie what command can I run?
I was assumming the Bcast was it.
you were right.
/sbin/route -n gave me the gateway I needed.
I know 0 about networking.
Shawn
On Wed, 2006-12-20 at 01:39 +0900, Shawn wrote:
Hi,
DHCP gives the additional routing information (defaut gw) that you'll need to configure manually if you switch to static address. Look for the default gateway field in the network configuration GUI.
Yeah I did, I think. the default gateway field was set. I called it bcast in my mail because that is what is said under /sbin/ifconfig.
No? If not, where can I find my default gw. Ie what command can I run?
I was assumming the Bcast was it.
you were right.
/sbin/route -n gave me the gateway I needed.
I know 0 about networking.
Shawn
We've all been there ;)
- Gilboa
-
Gilboa Davara -
javajunkie -
linuxmaillists＠charter.net