Hi!
After I upgraded to FC3. I found that the poweroff option because halt only and failed to power off my PC.. Is there some thing wrong on me or the kernel error ?
Ringo
Wong Kwok-hon wrote:
After I upgraded to FC3. I found that the poweroff option because halt only and failed to power off my PC.. Is there some thing wrong on me or the kernel error ?
Works for me, but...
What motherboard do you have? What chipset? How old is your BIOS?
Do you have Hyperthreading enabled or multiple processors?
Powering off implies BIOS support using either APM or ACPI. APM doesn't work on SMP (including Hyperthreading) boards, and ACPI might be turned off, either by a kernel option, or the kernel not liking your BIOS.
Can you post the results of grep -i ACPI /var/log/dmesg
Thanks,
James.
James Wilkinson wrote:
Wong Kwok-hon wrote:
After I upgraded to FC3. I found that the poweroff option because halt only and failed to power off my PC.. Is there some thing wrong on me or the kernel error ?
Works for me, but...
What motherboard do you have? What chipset? How old is your BIOS?
Do you have Hyperthreading enabled or multiple processors?
Powering off implies BIOS support using either APM or ACPI. APM doesn't work on SMP (including Hyperthreading) boards, and ACPI might be turned off, either by a kernel option, or the kernel not liking your BIOS.
Can you post the results of grep -i ACPI /var/log/dmesg
Thanks,
James.
I have the same problem with my ECS K7VTA3 motherboard. In FC2 power off worked fine but after upgrade to FC3 it only turns off disks and halt with "acpi_power_off called" message. (I upgraded with CD's, it isn't fresh install) There is result of "grep -i ACPI /var/log/dmesg":
BIOS-e820: 000000002fff0000 - 000000002fff3000 (ACPI NVS) BIOS-e820: 000000002fff3000 - 0000000030000000 (ACPI data) ACPI: RSDP (v000 VIA694 ) @ 0x000f6a20 ACPI: RSDT (v001 VIA694 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x2fff3000 ACPI: FADT (v001 VIA694 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x2fff3040 ACPI: DSDT (v001 VIA694 AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x00000000 ACPI: PM-Timer IO Port: 0x4008 ACPI: IRQ9 SCI: Level Trigger. ACPI: Subsystem revision 20040816 ACPI: Interpreter enabled ACPI: Using PIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (00:00) ACPI: PCI Interrupt Routing Table [_SB_.PCI0._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 *5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 1 *3 4 5 6 7 10 11 12 14 15) PCI: Using ACPI for IRQ routing ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10 ACPI: PCI interrupt 0000:00:09.0[A] -> GSI 10 (level, low) -> IRQ 10 ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11 ACPI: PCI interrupt 0000:00:10.0[A] -> GSI 11 (level, low) -> IRQ 11 ACPI: PCI interrupt 0000:00:10.1[B] -> GSI 10 (level, low) -> IRQ 10 ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 5 ACPI: PCI interrupt 0000:00:10.2[C] -> GSI 5 (level, low) -> IRQ 5 ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 3 ACPI: PCI interrupt 0000:00:10.3[D] -> GSI 3 (level, low) -> IRQ 3 ACPI: PCI interrupt 0000:00:11.1[A] -> GSI 11 (level, low) -> IRQ 11 ACPI: PCI interrupt 0000:00:11.5[C] -> GSI 5 (level, low) -> IRQ 5 ACPI: PCI interrupt 0000:00:12.0[A] -> GSI 11 (level, low) -> IRQ 11 ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 11 (level, low) -> IRQ 11 apm: overridden by ACPI. ACPI: Fan [FAN] (on) ACPI: Processor [CPU0] (supports C1 C2) ACPI: Thermal Zone [THRM] (47 C) ACPI: PCI interrupt 0000:00:11.1[A] -> GSI 11 (level, low) -> IRQ 11 ACPI: (supports S0 S1 S4 S5) ACPI wakeup devices: ACPI: PCI interrupt 0000:00:12.0[A] -> GSI 11 (level, low) -> IRQ 11 ACPI: PCI interrupt 0000:00:09.0[A] -> GSI 10 (level, low) -> IRQ 10 ACPI: PCI interrupt 0000:00:11.5[C] -> GSI 5 (level, low) -> IRQ 5 ACPI: PCI interrupt 0000:00:10.3[D] -> GSI 3 (level, low) -> IRQ 3 ACPI: PCI interrupt 0000:00:10.0[A] -> GSI 11 (level, low) -> IRQ 11 ACPI: PCI interrupt 0000:00:10.1[B] -> GSI 10 (level, low) -> IRQ 10 ACPI: PCI interrupt 0000:00:10.2[C] -> GSI 5 (level, low) -> IRQ 5 ACPI: Power Button (FF) [PWRF] ACPI: Sleep Button (CM) [SLPB]
thanks for help
On Fri, 12 Nov 2004 15:11:58 +0100, Mariusz W gogers@poczta.onet.pl wrote:
James Wilkinson wrote:
Wong Kwok-hon wrote:
After I upgraded to FC3. I found that the poweroff option because halt only and failed to power off my PC.. Is there some thing wrong on me or the kernel error ?
Works for me, but...
What motherboard do you have? What chipset? How old is your BIOS?
Do you have Hyperthreading enabled or multiple processors?
Powering off implies BIOS support using either APM or ACPI. APM doesn't work on SMP (including Hyperthreading) boards, and ACPI might be turned off, either by a kernel option, or the kernel not liking your BIOS.
Can you post the results of grep -i ACPI /var/log/dmesg
Thanks,
James.
I have the same problem with my ECS K7VTA3 motherboard. In FC2 power off worked fine but after upgrade to FC3 it only turns off disks and halt with "acpi_power_off called" message. (I upgraded with CD's, it isn't fresh install) There is result of "grep -i ACPI /var/log/dmesg":
BIOS-e820: 000000002fff0000 - 000000002fff3000 (ACPI NVS) BIOS-e820: 000000002fff3000 - 0000000030000000 (ACPI data) ACPI: RSDP (v000 VIA694 ) @ 0x000f6a20 ACPI: RSDT (v001 VIA694 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x2fff3000 ACPI: FADT (v001 VIA694 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x2fff3040 ACPI: DSDT (v001 VIA694 AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x00000000 ACPI: PM-Timer IO Port: 0x4008 ACPI: IRQ9 SCI: Level Trigger. ACPI: Subsystem revision 20040816 ACPI: Interpreter enabled ACPI: Using PIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (00:00) ACPI: PCI Interrupt Routing Table [_SB_.PCI0._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 *5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 1 *3 4 5 6 7 10 11 12 14 15) PCI: Using ACPI for IRQ routing ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10 ACPI: PCI interrupt 0000:00:09.0[A] -> GSI 10 (level, low) -> IRQ 10 ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11 ACPI: PCI interrupt 0000:00:10.0[A] -> GSI 11 (level, low) -> IRQ 11 ACPI: PCI interrupt 0000:00:10.1[B] -> GSI 10 (level, low) -> IRQ 10 ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 5 ACPI: PCI interrupt 0000:00:10.2[C] -> GSI 5 (level, low) -> IRQ 5 ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 3 ACPI: PCI interrupt 0000:00:10.3[D] -> GSI 3 (level, low) -> IRQ 3 ACPI: PCI interrupt 0000:00:11.1[A] -> GSI 11 (level, low) -> IRQ 11 ACPI: PCI interrupt 0000:00:11.5[C] -> GSI 5 (level, low) -> IRQ 5 ACPI: PCI interrupt 0000:00:12.0[A] -> GSI 11 (level, low) -> IRQ 11 ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 11 (level, low) -> IRQ 11 apm: overridden by ACPI. ACPI: Fan [FAN] (on) ACPI: Processor [CPU0] (supports C1 C2) ACPI: Thermal Zone [THRM] (47 C) ACPI: PCI interrupt 0000:00:11.1[A] -> GSI 11 (level, low) -> IRQ 11 ACPI: (supports S0 S1 S4 S5) ACPI wakeup devices: ACPI: PCI interrupt 0000:00:12.0[A] -> GSI 11 (level, low) -> IRQ 11 ACPI: PCI interrupt 0000:00:09.0[A] -> GSI 10 (level, low) -> IRQ 10 ACPI: PCI interrupt 0000:00:11.5[C] -> GSI 5 (level, low) -> IRQ 5 ACPI: PCI interrupt 0000:00:10.3[D] -> GSI 3 (level, low) -> IRQ 3 ACPI: PCI interrupt 0000:00:10.0[A] -> GSI 11 (level, low) -> IRQ 11 ACPI: PCI interrupt 0000:00:10.1[B] -> GSI 10 (level, low) -> IRQ 10 ACPI: PCI interrupt 0000:00:10.2[C] -> GSI 5 (level, low) -> IRQ 5 ACPI: Power Button (FF) [PWRF] ACPI: Sleep Button (CM) [SLPB]
thanks for help
Hi!
This is my dmesg and failed to power off just halt:
$ grep -i ACPI /var/log/dmesg
BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS) BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data) ACPI: RSDP (v000 AOPEN ) @ 0x000f6200 ACPI: RSDT (v001 AOPEN AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff3000 ACPI: FADT (v001 AOPEN AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff3040 ACPI: DSDT (v001 AOPEN AWRDACPI 0x00001000 MSFT 0x0100000c) @ 0x00000000 ACPI: PM-Timer IO Port: 0x4008 ACPI: IRQ9 SCI: Edge set to Level Trigger. ACPI: Subsystem revision 20040816 ACPI: Interpreter enabled ACPI: Using PIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (00:00) ACPI: PCI Interrupt Routing Table [_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [_SB_.PCI0.HUB0._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 11 *12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) PCI: Using ACPI for IRQ routing ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10 ACPI: PCI interrupt 0000:00:1f.2[D] -> GSI 10 (level, low) -> IRQ 10 ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11 ACPI: PCI interrupt 0000:00:1f.3[B] -> GSI 11 (level, low) -> IRQ 11 ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 11 ACPI: PCI interrupt 0000:00:1f.4[C] -> GSI 11 (level, low) -> IRQ 11 ACPI: PCI interrupt 0000:00:1f.5[B] -> GSI 11 (level, low) -> IRQ 11 ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 12 ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 12 (level, low) -> IRQ 12 ACPI: PCI Interrupt Link [LNK0] enabled at IRQ 10 ACPI: PCI interrupt 0000:02:09.0[A] -> GSI 10 (level, low) -> IRQ 10 ACPI: PCI interrupt 0000:02:0a.0[A] -> GSI 11 (level, low) -> IRQ 11 apm: overridden by ACPI. ACPI: Fan [FAN] (on) ACPI: Processor [CPU0] (supports C1, 2 throttling states) ACPI: Thermal Zone [THRM] (45 C) ACPI: (supports S0 S1 S4 S5) ACPI wakeup devices: ACPI: PCI interrupt 0000:02:09.0[A] -> GSI 10 (level, low) -> IRQ 10 ACPI: PCI interrupt 0000:02:0a.0[A] -> GSI 11 (level, low) -> IRQ 11 ACPI: PCI interrupt 0000:00:1f.5[B] -> GSI 11 (level, low) -> IRQ 11 ACPI: PCI interrupt 0000:00:1f.2[D] -> GSI 10 (level, low) -> IRQ 10 ACPI: PCI interrupt 0000:00:1f.4[C] -> GSI 11 (level, low) -> IRQ 11 ACPI: Power Button (FF) [PWRF]
Mariusz W and Wong Kwok-hon were having trouble with the poweroff command only halting their machines.
I can't see any problems looking over your /etc/dmesg outputs. Could you try booting with acpi=off on the kernel command line (assuming neither of you have hyperthreading or SMP)? That would help rule ACPI in or out.
After that, though, I think you're going to have to bugzilla it.
Sorry I can't help more.
James.
On Sat, 13 Nov 2004 22:56:07 +0000, James Wilkinson james@westexe.demon.co.uk wrote:
Mariusz W and Wong Kwok-hon were having trouble with the poweroff command only halting their machines.
I can't see any problems looking over your /etc/dmesg outputs. Could you try booting with acpi=off on the kernel command line (assuming neither of you have hyperthreading or SMP)? That would help rule ACPI in or out.
After that, though, I think you're going to have to bugzilla it.
Sorry I can't help more.
James.
I wonder that FC2 no such error found...
Wong Kwok-hon wrote:
Hi!
After I upgraded to FC3. I found that the poweroff option because halt only and failed to power off my PC.. Is there some thing wrong on me or the kernel error ?
Ringo
There is a bug http://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=132761
Wong Kwok-hon wrote:
Hi!
After I upgraded to FC3. I found that the poweroff option because halt only and failed to power off my PC.. Is there some thing wrong on me or the kernel error ?
Ringo
I have the same problem with FC2 kernel 2.6.9-1.6, acpi doesn't power off my machine. With 2.6.8 my pc has powered off perfectly. (k7s5a athlon xp 1.6) If you are going to do a bug report please include that the error is in FC2 too. Cheers
-
fabiano -
James Wilkinson -
Mariusz W -
Wong Kwok-hon