(2nd time)unable to burn disk in brasero disk burner (every-time it spoils the disk )

[Jatin K]

Dear all,

I'm trying to burn a cd iso image with my brasero disk burner on FC 11, 
but not able to burn the disk ..it shows following error log and disk 
gets fail ... I've lost my 8 disks ( DVD also gets fail .....  but in 
ugly M$ xp can burn the disk without any problem..!!! it means there is 
no any fault at dvd burner )


can any-one tell me what is going wrong ????

----------------------------------------
Checking session consistency (brasero_burn_check_session_consistency 
burn.c:1905)
BraseroBurnURI called brasero_job_get_action
BraseroBurnURI called brasero_job_get_action
BraseroBurnURI called brasero_job_set_output_size_for_current_track
BraseroBurnURI stopping
BraseroBurnURI called brasero_job_get_action
BraseroBurnURI called brasero_job_get_session_output_size
BraseroBurnURI output set (IMAGE) image = /tmp/brasero_tmp_4HIQ2U.bin 
toc = none
BraseroBurnURI called brasero_job_get_action
BraseroBurnURI called brasero_job_get_current_track
BraseroBurnURI called brasero_job_get_input_type
BraseroBurnURI no burn:// URI found
BraseroBurnURI stopping
BraseroLocalTrack called brasero_job_get_action
BraseroLocalTrack called brasero_job_get_action
BraseroLocalTrack called brasero_job_set_output_size_for_current_track
BraseroLocalTrack stopping
BraseroLocalTrack called brasero_job_get_action
BraseroLocalTrack called brasero_job_get_session_output_size
BraseroLocalTrack output set (IMAGE) image = /tmp/brasero_tmp_6HHQ2U.bin 
toc = none
BraseroLocalTrack called brasero_job_get_action
BraseroLocalTrack called brasero_job_get_current_track
BraseroLocalTrack called brasero_job_get_input_type
BraseroLocalTrack no remote URIs
BraseroLocalTrack stopping
BraseroChecksumImage called brasero_job_get_current_track
BraseroChecksumImage called brasero_job_get_action
BraseroChecksumImage called brasero_job_get_flags
BraseroChecksumImage called brasero_job_get_action
BraseroChecksumImage called brasero_job_get_action
BraseroChecksumImage called brasero_job_get_fd_in
BraseroChecksumImage called brasero_job_set_output_size_for_current_track
BraseroChecksumImage stopping
BraseroChecksumImage called brasero_job_get_current_track
BraseroChecksumImage called brasero_job_get_action
BraseroChecksumImage called brasero_job_get_flags
BraseroChecksumImage called brasero_job_get_action
BraseroChecksumImage called brasero_job_get_session_output_size
BraseroChecksumImage output set (IMAGE) image = 
/tmp/brasero_tmp_B5HQ2U.bin toc = none
BraseroChecksumImage called brasero_job_get_action
BraseroChecksumImage called brasero_job_get_action
BraseroChecksumImage called brasero_job_get_input_type
BraseroChecksumImage called brasero_job_set_current_action
BraseroChecksumImage called brasero_job_get_fd_in
BraseroChecksumImage called brasero_job_get_current_track
BraseroChecksumImage called brasero_job_get_current_track
BraseroChecksumImage Starting checksuming file 
/home/jk/RPM-packages/FC12.iso (size = 723488768)
BraseroChecksumImage called brasero_job_get_fd_out
BraseroChecksumImage called brasero_job_get_current_track
BraseroChecksumImage Setting new checksum (type = 2) 
8790491bfa9d00f283ed9dd2d77b3906 ( before)
BraseroChecksumImage Finished track successfully
BraseroChecksumImage stopping
BraseroLibburn called brasero_job_get_action
BraseroLibburn called brasero_job_get_action
BraseroLibburn unsupported operation
BraseroLibburn deactivating
BraseroLibburn called brasero_job_get_action
BraseroLibburn called brasero_job_get_action
BraseroLibburn called brasero_job_get_device
BraseroLibburn Drive (/dev/sr0) init result = 1
BraseroLibburn called brasero_job_get_flags
BraseroLibburn called brasero_job_get_media
BraseroLibburn called brasero_job_get_fd_in
BraseroLibburn called brasero_job_get_tracks
BraseroLibburn called brasero_job_get_session_output_size
BraseroLibburn called brasero_job_set_current_action
BraseroLibburn burn_drive_convert_fs_adr( /dev/sr0 )
BraseroLibburn called brasero_job_set_dangerous
BraseroLibburn called brasero_job_set_current_action
BraseroLibburn burn_drive_is_enumerable_adr( /dev/sr0 ) is true
BraseroLibburn Async START UNIT succeeded after 0.1 seconds
BraseroLibburn mmc_get_nwa: Track Info Block: NWA_V == 0
BraseroLibburn cd Profile= 09h , obs= 32768 , obs_pad= 0
BraseroLibburn mmc_get_nwa: Track Info Block: NWA_V == 0
BraseroLibburn SAO|RAW: Inquired nwa: 0 , ret= 0 , cap=0

BraseroLibburn called brasero_job_set_dangerous
BraseroLibburn called brasero_job_set_current_action
BraseroLibburn SCSI error condition on command 2Ah WRITE(10): [3 0C 00] 
  Write error
BraseroLibburn Libburn reported an error SCSI error on write(17578,16): 
[3 0C 00]  Write error
BraseroLibburn called brasero_job_error
BraseroLibburn finished with an error
BraseroLibburn asked to stop because of an error
     error        = 1
     message    = "SCSI error on write(17578,16): [3 0C 00]  Write error"
BraseroLibburn stopping
Session error : SCSI error on write(17578,16): [3 0C 00]  Write error 
(brasero_burn_record burn.c:2599)

----------------------------------------

-- 
   °v°
  /(_)\
   ^ ^  Jatin Khatri

No MS

[Jud Craft]

F11's Brasero has had some serious bugs (it started out fine, but
updates made it worse).  You could try updating to the newest Brasero
in Rawhide.

"yum update --enablerepo=rawhide brasero"

That might work.  You could also try running F12, which uses the
newest version of Brasero as well and has fixed several bugs.

[Patrick O'Callaghan]

On Sun, 2009-11-01 at 16:03 +0530, Jatin K wrote:
>  I'm trying to burn a cd iso image with my brasero disk burner on
> FC
>  11, 
>  but not able to burn the disk ..it shows following error log and disk 
>  gets fail ... I've lost my 8 disks ( DVD also gets fail .....  but in 
>  ugly M$ xp can burn the disk without any problem..!!! it means there
>  is 
>  no any fault at dvd burner )
>  
>  
>  can any-one tell me what is going wrong ???? 
I think Brasero and k3b just call growisofs. I use this Shell script to
burn ISO images:

        $ cat BURN-iso
        #!/bin/sh
        # Usage: BURN-iso iso-file
        
        /usr/bin/growisofs -Z /dev/sr0="$1" -use-the-force-luke=notray
-use-the-force-luke=tty -use-the-force-luke=tracksize:2285858 -dvd-compat -speed=16
-overburn -use-the-force-luke=bufsize:16m

It assumes your burner is /dev/sr0. You might want to change the -speed
parameter, or just leave it out.

Try it and see what happens.

poc