Hi Jay:
I agree with your diagnosis of eth0/eth1 gateway collision, I just do not know how to take care of it.
Before I did not have to set a GW for eth0 and, if I remember correctly, had a GW = 10.0.0.1 for eth1.
Anyway, my /sbin/route output:
Destination Gateway Genmask Flags Metric Ref Use Iface 68.187.12.0 * 255.255.252.0 U 0 0 0 eth0 169.254.0.0 * 255.255.0.0 U 0 0 0 eth0 default cable3-0-10-rcp 0.0.0.0 UG 0 0 0 eth0
Note that my eth1 is down because if it goes up, my internet connection fails.
Thanks for your help.
Enrico
--- Jay Scherrer jay@scherrer.com ha scritto:
Enrico,
What is the setting for eth0? eth0 and eth1 must have different ip's. I am not familiar with 10.0.0.0's netmask. I use 192.168.0.0 with a netmask of 255.255.255.0 as I am not running such a large network. But if your eth1 has 10.0.0.1 your eth0 set to DHCP and your other lan set to 10.0.0.50
What does: /sbin/route Show? Have you set eth0 and eth1 with /sbin/route? example: /sbin/route add gateway etho (because you don't have an firm ip address) for eth1 you would: /sbin/route add 10.0.0.1 read your man route pages first. It looks like you have a collision between eth0 and eth1 for the gateway.
___________________________________ Nuovo Yahoo! Messenger: E' molto più divertente: Audibles, Avatar, Webcam, Giochi, Rubrica Scaricalo ora! http://it.messenger.yahoo.it
-
Salvatore Indiogine