How do I install the Wireless USB with Ralink 3070 (RT3070) Chipset?

[Valent Turkovic]

Just posted this question to Fedora ASK page:
https://ask.fedoraproject.org/question/26799/how-do-i-install-the-wireless-u...

I also reported this as a bug:
https://bugzilla.redhat.com/show_bug.cgi?id=974072

How should I report this to upstream kernel developers?

Thanks.

--
follow me - www.twitter.com/valentt & http://kernelreloaded.blog385.com
linux, anime, spirituality, wireless, scuba, linuxmce smart home, zwave
ICQ: 2125241, Skype: valent.turkovic, MSN: [e-mail]

[Ed Greshko]

On 06/13/13 19:58, [e-mail] wrote:
> Just posted this question to Fedora ASK page:
> https://ask.fedoraproject.org/question/26799/how-do-i-install-the-wireless-u...
>
> I also reported this as a bug:
> https://bugzilla.redhat.com/show_bug.cgi?id=974072
>
> How should I report this to upstream kernel developers?

On my F18 my USB WiFi adapter works just fine....

[egreshko@meimei ~]$ lsusb -d 0411:015d
Bus 001 Device 004: ID 0411:015d BUFFALO INC. (formerly MelCo., Inc.) WLI-UC-GN Wireless LAN Adapter [Ralink RT3070]

- Device: wlan0  [misty-net] ---------------------------------------------------
  Type:              802.11 WiFi
  Driver:            rt2800usb
  State:             connected
  Default:           no
  HW Address:        00:24:A5:50:70:B2

Capabilities:
    Speed:           48 Mb/s

Wireless Properties
    WEP Encryption:  yes
    WPA Encryption:  yes
    WPA2 Encryption: yes

[Valent Turkovic]

On Thu, Jun 13, 2013 at 4:33 PM, Ed Greshko  wrote:
> On 06/13/13 19:58, [e-mail] wrote:
> > Just posted this question to Fedora ASK page:
> > https://ask.fedoraproject.org/question/26799/how-do-i-install-the-wireless-u...
> >
> > I also reported this as a bug:
> > https://bugzilla.redhat.com/show_bug.cgi?id=974072
> >
> > How should I report this to upstream kernel developers?
>
> On my F18 my USB WiFi adapter works just fine....
>
> [egreshko@meimei ~]$ lsusb -d 0411:015d
> Bus 001 Device 004: ID 0411:015d BUFFALO INC. (formerly MelCo., Inc.) WLI-UC-GN Wireless LAN Adapter [Ralink RT3070]
>
> Device: wlan0  [misty-net] ---------------------------------------------------
> Type:              802.11 WiFi
> Driver:            rt2800usb
> State:             connected
> Default:           no
> HW Address:        00:24:A5:50:70:B2
>
> Capabilities:
>   Speed:           48 Mb/s
>
> Wireless Properties
>   WEP Encryption:  yes
>   WPA Encryption:  yes
>   WPA2 Encryption: yes

That is odd... it doesn't on mine... but be have different devices,
please send your dmesg log.

lsusb:
Bus 002 Device 004: ID 148f:3070 Ralink Technology, Corp.
RT2870/RT3070 Wireless Adapter

dmesg:
[   76.583036] usb 2-2: new high-speed USB device number 4 using ehci-pci
[   76.717649] usb 2-2: New USB device found, idVendor=148f, idProduct=3070
[   76.717655] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[   76.717658] usb 2-2: Product: 802.11 n WLAN
[   76.717660] usb 2-2: Manufacturer: Ralink
[   76.717662] usb 2-2: SerialNumber: 1.0
[   76.791246] cfg80211: Calling CRDA to update world regulatory domain
[   76.811737] cfg80211: World regulatory domain updated:
[   76.811743] cfg80211:   (start_freq - end_freq @ bandwidth),
(max_antenna_gain, max_eirp)
[   76.811746] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz),
(300 mBi, 2000 mBm)
[   76.811748] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz),
(300 mBi, 2000 mBm)
[   76.811749] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz),
(300 mBi, 2000 mBm)
[   76.811751] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz),
(300 mBi, 2000 mBm)
[   76.811753] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz),
(300 mBi, 2000 mBm)
[   76.943039] usb 2-2: reset high-speed USB device number 4 using ehci-pci
[   77.086274] phy0 -> rt2x00_set_chip: Info - Chipset detected - rt:
5390, rf: 3070, rev: 0502.
[   77.086280] phy0 -> rt2800_init_eeprom: Error - Invalid RF chipset
0x3070 detected.
[   77.086282] phy0 -> rt2x00lib_probe_dev: Error - Failed to allocate device.
[   77.087703] usbcore: registered new interface driver rt2800usb

uname -a:
Linux blackbox.lan 3.9.4-200.fc18.x86_64 #1 SMP Fri May 24 20:10:49
UTC 2013 x86_64 x86_64 x86_64 GNU/Linux

[Valent Turkovic]

Anybody?

On Thu, Jun 13, 2013 at 8:44 PM, [e-mail]
 wrote:
> On Thu, Jun 13, 2013 at 4:33 PM, Ed Greshko  wrote:
> > On 06/13/13 19:58, [e-mail] wrote:
> > > Just posted this question to Fedora ASK page:
> > > https://ask.fedoraproject.org/question/26799/how-do-i-install-the-wireless-u...
> > >
> > > I also reported this as a bug:
> > > https://bugzilla.redhat.com/show_bug.cgi?id=974072
> > >
> > > How should I report this to upstream kernel developers?
> >
> > On my F18 my USB WiFi adapter works just fine....
> >
> > [egreshko@meimei ~]$ lsusb -d 0411:015d
> > Bus 001 Device 004: ID 0411:015d BUFFALO INC. (formerly MelCo., Inc.) WLI-UC-GN Wireless LAN Adapter [Ralink RT3070]
> >
> > Device: wlan0  [misty-net] ---------------------------------------------------
> > Type:              802.11 WiFi
> > Driver:            rt2800usb
> > State:             connected
> > Default:           no
> > HW Address:        00:24:A5:50:70:B2
> >
> > Capabilities:
> >   Speed:           48 Mb/s
> >
> > Wireless Properties
> >   WEP Encryption:  yes
> >   WPA Encryption:  yes
> >   WPA2 Encryption: yes
>
> That is odd... it doesn't on mine... but be have different devices,
> please send your dmesg log.
>
> lsusb:
> Bus 002 Device 004: ID 148f:3070 Ralink Technology, Corp.
> RT2870/RT3070 Wireless Adapter
>
> dmesg:
> [   76.583036] usb 2-2: new high-speed USB device number 4 using ehci-pci
> [   76.717649] usb 2-2: New USB device found, idVendor=148f, idProduct=3070
> [   76.717655] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
> [   76.717658] usb 2-2: Product: 802.11 n WLAN
> [   76.717660] usb 2-2: Manufacturer: Ralink
> [   76.717662] usb 2-2: SerialNumber: 1.0
> [   76.791246] cfg80211: Calling CRDA to update world regulatory domain
> [   76.811737] cfg80211: World regulatory domain updated:
> [   76.811743] cfg80211:   (start_freq - end_freq @ bandwidth),
> (max_antenna_gain, max_eirp)
> [   76.811746] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz),
> (300 mBi, 2000 mBm)
> [   76.811748] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz),
> (300 mBi, 2000 mBm)
> [   76.811749] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz),
> (300 mBi, 2000 mBm)
> [   76.811751] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz),
> (300 mBi, 2000 mBm)
> [   76.811753] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz),
> (300 mBi, 2000 mBm)
> [   76.943039] usb 2-2: reset high-speed USB device number 4 using ehci-pci
> [   77.086274] phy0 -> rt2x00_set_chip: Info - Chipset detected - rt:
> 5390, rf: 3070, rev: 0502.
> [   77.086280] phy0 -> rt2800_init_eeprom: Error - Invalid RF chipset
> 0x3070 detected.
> [   77.086282] phy0 -> rt2x00lib_probe_dev: Error - Failed to allocate device.
> [   77.087703] usbcore: registered new interface driver rt2800usb
>
> uname -a:
> Linux blackbox.lan 3.9.4-200.fc18.x86_64 #1 SMP Fri May 24 20:10:49
> UTC 2013 x86_64 x86_64 x86_64 GNU/Linux

[Tom Horsley]

On Sat, 22 Jun 2013 16:27:29 +0200
[e-mail] wrote:
> Anybody?

linuxwireless.org is the place to go for all linux
wireless info (unfortunately, the web site is more
confusing than a Windows 8 tablet :-).

I found this page:

http://wireless.kernel.org/en/users/Drivers/rt2800usb

which may cryptically imply you need a special firmware
module to get it going (which probably isn't shipped
by fedora because it isn't open source).

It is the "how do I use this" part though where
the web site becomes hopeless. I certainly have
no idea.

[Terry Polzin]

On Sat, 2013-06-22 at 16:27 +0200, [e-mail] wrote:
> Anybody?
>
> On Thu, Jun 13, 2013 at 8:44 PM, [e-mail]
>  wrote:
> > On Thu, Jun 13, 2013 at 4:33 PM, Ed Greshko  wrote:
> > > On 06/13/13 19:58, [e-mail] wrote:
> > > > Just posted this question to Fedora ASK page:
> > > > https://ask.fedoraproject.org/question/26799/how-do-i-install-the-wireless-u...
> > > >
> > > > I also reported this as a bug:
> > > > https://bugzilla.redhat.com/show_bug.cgi?id=974072
> > > >
> > > > How should I report this to upstream kernel developers?
> > >
> > > On my F18 my USB WiFi adapter works just fine....
> > >
> > > [egreshko@meimei ~]$ lsusb -d 0411:015d
> > > Bus 001 Device 004: ID 0411:015d BUFFALO INC. (formerly MelCo., Inc.) WLI-UC-GN Wireless LAN Adapter [Ralink RT3070]
> > >
> > > Device: wlan0  [misty-net] ---------------------------------------------------
> > > Type:              802.11 WiFi
> > > Driver:            rt2800usb
> > > State:             connected
> > > Default:           no
> > > HW Address:        00:24:A5:50:70:B2
> > >
> > > Capabilities:
> > >   Speed:           48 Mb/s
> > >
> > > Wireless Properties
> > >   WEP Encryption:  yes
> > >   WPA Encryption:  yes
> > >   WPA2 Encryption: yes
> >
> > That is odd... it doesn't on mine... but be have different devices,
> > please send your dmesg log.
> >
> > lsusb:
> > Bus 002 Device 004: ID 148f:3070 Ralink Technology, Corp.
> > RT2870/RT3070 Wireless Adapter
> >
> > dmesg:
> > [   76.583036] usb 2-2: new high-speed USB device number 4 using ehci-pci
> > [   76.717649] usb 2-2: New USB device found, idVendor=148f, idProduct=3070
> > [   76.717655] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
> > [   76.717658] usb 2-2: Product: 802.11 n WLAN
> > [   76.717660] usb 2-2: Manufacturer: Ralink
> > [   76.717662] usb 2-2: SerialNumber: 1.0
> > [   76.791246] cfg80211: Calling CRDA to update world regulatory domain
> > [   76.811737] cfg80211: World regulatory domain updated:
> > [   76.811743] cfg80211:   (start_freq - end_freq @ bandwidth),
> > (max_antenna_gain, max_eirp)
> > [   76.811746] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz),
> > (300 mBi, 2000 mBm)
> > [   76.811748] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz),
> > (300 mBi, 2000 mBm)
> > [   76.811749] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz),
> > (300 mBi, 2000 mBm)
> > [   76.811751] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz),
> > (300 mBi, 2000 mBm)
> > [   76.811753] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz),
> > (300 mBi, 2000 mBm)
> > [   76.943039] usb 2-2: reset high-speed USB device number 4 using ehci-pci
> > [   77.086274] phy0 -> rt2x00_set_chip: Info - Chipset detected - rt:
> > 5390, rf: 3070, rev: 0502.
> > [   77.086280] phy0 -> rt2800_init_eeprom: Error - Invalid RF chipset
> > 0x3070 detected.
> > [   77.086282] phy0 -> rt2x00lib_probe_dev: Error - Failed to allocate device.
> > [   77.087703] usbcore: registered new interface driver rt2800usb
> >
> > uname -a:
> > Linux blackbox.lan 3.9.4-200.fc18.x86_64 #1 SMP Fri May 24 20:10:49
> > UTC 2013 x86_64 x86_64 x86_64 GNU/Linux
>
> -- 
> follow me - www.twitter.com/valentt & http://kernelreloaded.blog385.com
> linux, anime, spirituality, wireless, scuba, linuxmce smart home, zwave
> ICQ: 2125241, Skype: valent.turkovic, MSN: [e-mail]

Do you have the firmware installed?

[poma]

On 22.06.2013 16:27, [e-mail] wrote:
> Anybody?

So, did you apply this one,
https://bugzilla.redhat.com/show_bug.cgi?id=974072#c8?

http://wireless.kernel.org/en/developers/MailingLists#Stats_and_requirements...

poma