Usb scanner problem

[david walcroft]

Hi,
   I have had a scanning problem since moving up to FC3 from FC2 and
that is it is not identified by gimp,kooka and so on.
ptal-init sets it up and :-

[david@reddwarf ~]$ sane-find-scanner
found USB scanner (vendor=0x03f0 [Hewlett-Packard], product=0x2811 [PSC 
2100 Series]) at libusb:003:003

but :

[david@reddwarf ~]$ scanimage -L
scanimage: hp-option.c:3710: hp_optset_fix_geometry_options: Assertion 
`tl_x && tl_y && br_x && br_y' failed.
Aborted

software is uptodate
[david@reddwarf ~]$ rpm -q hpoj
hpoj-0.91-11
 [david@reddwarf ~]$ rpm -qa | grep sane
sane-frontends-1.0.12-4
sane-backends-devel-1.0.14-6
sane-backends-1.0.14-6
xsane-gimp-0.92-13
xsane-0.92-13

Any ideas anyone....

Thanks  david

[Jim Cornette]

david walcroft wrote:
> Hi,
>   I have had a scanning problem since moving up to FC3 from FC2 and
> that is it is not identified by gimp,kooka and so on.
> ptal-init sets it up and :-
>
> [david@reddwarf ~]$ sane-find-scanner
> found USB scanner (vendor=0x03f0 [Hewlett-Packard], product=0x2811 [PSC 
> 2100 Series]) at libusb:003:003
>
> but :
>
> [david@reddwarf ~]$ scanimage -L
> scanimage: hp-option.c:3710: hp_optset_fix_geometry_options: Assertion 
> `tl_x && tl_y && br_x && br_y' failed.
> Aborted
>
> software is uptodate
> [david@reddwarf ~]$ rpm -q hpoj
> hpoj-0.91-11
> [david@reddwarf ~]$ rpm -qa | grep sane
> sane-frontends-1.0.12-4
> sane-backends-devel-1.0.14-6
> sane-backends-1.0.14-6
> xsane-gimp-0.92-13
> xsane-0.92-13
>
> Any ideas anyone....
>
> Thanks  david

Try adding the testing repo to your repositories to get the latest 
programs. I have an hp 2100 scanner and it eems to work alright in FC3.

I'm not sure what the hpoj has to do with the scanner.

Jim

Refer to below bug report for needed packages.
https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=121511

[david walcroft]

Jim Cornette wrote:
> david walcroft wrote:
> > Hi,
> >   I have had a scanning problem since moving up to FC3 from FC2 and
> > that is it is not identified by gimp,kooka and so on.
> > ptal-init sets it up and :-
> >
> > [david@reddwarf ~]$ sane-find-scanner
> > found USB scanner (vendor=0x03f0 [Hewlett-Packard], product=0x2811 
> > [PSC 2100 Series]) at libusb:003:003
> >
> > but :
> >
> > [david@reddwarf ~]$ scanimage -L
> > scanimage: hp-option.c:3710: hp_optset_fix_geometry_options: 
> > Assertion `tl_x && tl_y && br_x && br_y' failed.
> > Aborted
> >
> > software is uptodate
> > [david@reddwarf ~]$ rpm -q hpoj
> > hpoj-0.91-11
> > [david@reddwarf ~]$ rpm -qa | grep sane
> > sane-frontends-1.0.12-4
> > sane-backends-devel-1.0.14-6
> > sane-backends-1.0.14-6
> > xsane-gimp-0.92-13
> > xsane-0.92-13
> >
> > Any ideas anyone....
> >
> > Thanks  david
>
> Try adding the testing repo to your repositories to get the latest 
> programs. I have an hp 2100 scanner and it eems to work alright in FC3.
>
> I'm not sure what the hpoj has to do with the scanner.
>
> Jim
>
> Refer to below bug report for needed packages.
> https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=121511

Jim
    I just added my 2c to the bug as updating to updates-testing  hasn't 
worked,hpoj and
hpijs together handle print and scan requirements.

Thanks  david

[Jim Cornette]

david walcroft wrote:
> Jim Cornette wrote:
> > david walcroft wrote:
> > > Hi,
> > >   I have had a scanning problem since moving up to FC3 from FC2 and
> > > that is it is not identified by gimp,kooka and so on.
> > > ptal-init sets it up and :-
> > >
> > > [david@reddwarf ~]$ sane-find-scanner
> > > found USB scanner (vendor=0x03f0 [Hewlett-Packard], product=0x2811 
> > > [PSC 2100 Series]) at libusb:003:003
> > >
> > > but :
> > >
> > > [david@reddwarf ~]$ scanimage -L
> > > scanimage: hp-option.c:3710: hp_optset_fix_geometry_options: 
> > > Assertion `tl_x && tl_y && br_x && br_y' failed.
> > > Aborted
> > >
> > > software is uptodate
> > > [david@reddwarf ~]$ rpm -q hpoj
> > > hpoj-0.91-11
> > > [david@reddwarf ~]$ rpm -qa | grep sane
> > > sane-frontends-1.0.12-4
> > > sane-backends-devel-1.0.14-6
> > > sane-backends-1.0.14-6
> > > xsane-gimp-0.92-13
> > > xsane-0.92-13
> > >
> > > Any ideas anyone....
> > >
> > > Thanks  david
> >
> > Try adding the testing repo to your repositories to get the latest 
> > programs. I have an hp 2100 scanner and it seems to work alright in FC3.
> >
> > I'm not sure what the hpoj has to do with the scanner.
> >
> > Jim
> >
> > Refer to below bug report for needed packages.
> > https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=121511
>
> Jim
>    I just added my 2c to the bug as updating to updates-testing  hasn't 
> worked,hpoj and
> hpijs together handle print and scan requirements.
> Thanks  david

I have a scanner that is seperate. It is not a scanner printer 
combination. It is an HP 2100C model flatbed scanner and works fine with 
the testing versions of the suggested programs installed.

Since I don't have a combination unit and do not know if there are 
seperate usb device nodes for the scanner and another for the printer or 
if they use the same usb node for each device. It makes more sense to me 
for the devices to have seperate nodes per device. Could it be that the 
node for the scanner portion is not being set to the right setting?

sane-backends-1.0.15-1.4
hotplug-2004_04_01-8.1
pam-0.77-66.1

Are the program versions that are supposed to get the permissions setup 
correctly? It looks like you have these versions installed from the 
addition to the bug report.

Sorry that this remedy couldn't fix your problem. It sounds like hpijs 
is not being loaded correctly. You might try searching bugzilla for 
multi-function device entries.

Jim

[Vinicius]

Jim Cornette escreveu:
> david walcroft wrote:
> > Jim Cornette wrote:
> > > david walcroft wrote:
> > > > Hi,
> > > >   I have had a scanning problem since moving up to FC3 from FC2 and
> > > > that is it is not identified by gimp,kooka and so on.
> > > > ptal-init sets it up and :-
> > > >
> > > > [david@reddwarf ~]$ sane-find-scanner
> > > > found USB scanner (vendor=0x03f0 [Hewlett-Packard], product=0x2811 
> > > > [PSC 2100 Series]) at libusb:003:003
> > > >
> > > > but :
> > > >
> > > > [david@reddwarf ~]$ scanimage -L
> > > > scanimage: hp-option.c:3710: hp_optset_fix_geometry_options: 
> > > > Assertion `tl_x && tl_y && br_x && br_y' failed.
> > > > Aborted
> > > >
> > > > software is uptodate
> > > > [david@reddwarf ~]$ rpm -q hpoj
> > > > hpoj-0.91-11
> > > > [david@reddwarf ~]$ rpm -qa | grep sane
> > > > sane-frontends-1.0.12-4
> > > > sane-backends-devel-1.0.14-6
> > > > sane-backends-1.0.14-6
> > > > xsane-gimp-0.92-13
> > > > xsane-0.92-13
> > > >
> > > > Any ideas anyone....
> > > >
> > > > Thanks  david
> > >
> > > Try adding the testing repo to your repositories to get the latest 
> > > programs. I have an hp 2100 scanner and it seems to work alright in FC3.
> > >
> > > I'm not sure what the hpoj has to do with the scanner.
> > >
> > > Jim
> > >
> > > Refer to below bug report for needed packages.
> > > https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=121511
> >
> > Jim
> >    I just added my 2c to the bug as updating to updates-testing  
> > hasn't worked,hpoj and
> > hpijs together handle print and scan requirements.
> > Thanks  david
>
> I have a scanner that is seperate. It is not a scanner printer 
> combination. It is an HP 2100C model flatbed scanner and works fine with 
> the testing versions of the suggested programs installed.
>
> Since I don't have a combination unit and do not know if there are 
> seperate usb device nodes for the scanner and another for the printer or 
> if they use the same usb node for each device. It makes more sense to me 
> for the devices to have seperate nodes per device. Could it be that the 
> node for the scanner portion is not being set to the right setting?
>
> sane-backends-1.0.15-1.4
> hotplug-2004_04_01-8.1
> pam-0.77-66.1
>
> Are the program versions that are supposed to get the permissions setup 
> correctly? It looks like you have these versions installed from the 
> addition to the bug report.
>
> Sorry that this remedy couldn't fix your problem. It sounds like hpijs 
> is not being loaded correctly. You might try searching bugzilla for 
> multi-function device entries.
>
> Jim

Hi,

I've a HP PSC 1315 and I've installed the HPLIP driver 
(http://hpinkjet.sourceforge.net/index.php), so the scanner works fine 
with xsane.

Best regards,
Vinicius.

[david walcroft]

Vinicius wrote:
> Jim Cornette escreveu:
> > david walcroft wrote:
> > > Jim Cornette wrote:
> > > > david walcroft wrote:
> > > > > Hi,
> > > > >   I have had a scanning problem since moving up to FC3 from FC2 and
> > > > > that is it is not identified by gimp,kooka and so on.
> > > > > ptal-init sets it up and :-
> > > > >
> > > > > [david@reddwarf ~]$ sane-find-scanner
> > > > > found USB scanner (vendor=0x03f0 [Hewlett-Packard], product=0x2811 
> > > > > [PSC 2100 Series]) at libusb:003:003
> > > > >
> > > > > but :
> > > > >
> > > > > [david@reddwarf ~]$ scanimage -L
> > > > > scanimage: hp-option.c:3710: hp_optset_fix_geometry_options: 
> > > > > Assertion `tl_x && tl_y && br_x && br_y' failed.
> > > > > Aborted
> > > > >
> > > > > software is uptodate
> > > > > [david@reddwarf ~]$ rpm -q hpoj
> > > > > hpoj-0.91-11
> > > > > [david@reddwarf ~]$ rpm -qa | grep sane
> > > > > sane-frontends-1.0.12-4
> > > > > sane-backends-devel-1.0.14-6
> > > > > sane-backends-1.0.14-6
> > > > > xsane-gimp-0.92-13
> > > > > xsane-0.92-13
> > > > >
> > > > > Any ideas anyone....
> > > > >
> > > > > Thanks  david
> > > >
> > > > Try adding the testing repo to your repositories to get the latest 
> > > > programs. I have an hp 2100 scanner and it seems to work alright in 
> > > > FC3.
> > > >
> > > > I'm not sure what the hpoj has to do with the scanner.
> > > >
> > > > Jim
> > > >
> > > > Refer to below bug report for needed packages.
> > > > https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=121511
> > >
> > > Jim
> > >    I just added my 2c to the bug as updating to updates-testing  
> > > hasn't worked,hpoj and
> > > hpijs together handle print and scan requirements.
> > > Thanks  david
> >
> > I have a scanner that is seperate. It is not a scanner printer 
> > combination. It is an HP 2100C model flatbed scanner and works fine 
> > with the testing versions of the suggested programs installed.
> >
> > Since I don't have a combination unit and do not know if there are 
> > seperate usb device nodes for the scanner and another for the printer 
> > or if they use the same usb node for each device. It makes more sense 
> > to me for the devices to have seperate nodes per device. Could it be 
> > that the node for the scanner portion is not being set to the right 
> > setting?
> >
> > sane-backends-1.0.15-1.4
> > hotplug-2004_04_01-8.1
> > pam-0.77-66.1
> >
> > Are the program versions that are supposed to get the permissions 
> > setup correctly? It looks like you have these versions installed from 
> > the addition to the bug report.
> >
> > Sorry that this remedy couldn't fix your problem. It sounds like 
> > hpijs is not being loaded correctly. You might try searching bugzilla 
> > for multi-function device entries.
> >
> > Jim
>
> Hi,
>
> I've a HP PSC 1315 and I've installed the HPLIP driver 
> (http://hpinkjet.sourceforge.net/index.php), so the scanner works fine 
> with xsane.
>
> Best regards,
> Vinicius.

Vinicius,
             Do I need to uninstall the 'hpoj,hpijs'rpm's first or just 
add hplip.I did see it at hpinkjet but it did'nt
connect that it might be my answer.

Thanks      david

[Vinicius]

david walcroft escreveu:
> Vinicius wrote:
> > Jim Cornette escreveu:
> > > david walcroft wrote:
> > > > Jim Cornette wrote:
> > > > > david walcroft wrote:
> > > > > > Hi,
> > > > > >   I have had a scanning problem since moving up to FC3 from FC2 and
> > > > > > that is it is not identified by gimp,kooka and so on.
> > > > > > ptal-init sets it up and :-
> > > > > >
> > > > > > [david@reddwarf ~]$ sane-find-scanner
> > > > > > found USB scanner (vendor=0x03f0 [Hewlett-Packard], product=0x2811 
> > > > > > [PSC 2100 Series]) at libusb:003:003
> > > > > >
> > > > > > but :
> > > > > >
> > > > > > [david@reddwarf ~]$ scanimage -L
> > > > > > scanimage: hp-option.c:3710: hp_optset_fix_geometry_options: 
> > > > > > Assertion `tl_x && tl_y && br_x && br_y' failed.
> > > > > > Aborted
> > > > > >
> > > > > > software is uptodate
> > > > > > [david@reddwarf ~]$ rpm -q hpoj
> > > > > > hpoj-0.91-11
> > > > > > [david@reddwarf ~]$ rpm -qa | grep sane
> > > > > > sane-frontends-1.0.12-4
> > > > > > sane-backends-devel-1.0.14-6
> > > > > > sane-backends-1.0.14-6
> > > > > > xsane-gimp-0.92-13
> > > > > > xsane-0.92-13
> > > > > >
> > > > > > Any ideas anyone....
> > > > > >
> > > > > > Thanks  david
> > > > >
> > > > > Try adding the testing repo to your repositories to get the latest 
> > > > > programs. I have an hp 2100 scanner and it seems to work alright in 
> > > > > FC3.
> > > > >
> > > > > I'm not sure what the hpoj has to do with the scanner.
> > > > >
> > > > > Jim
> > > > >
> > > > > Refer to below bug report for needed packages.
> > > > > https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=121511
> > > >
> > > > Jim
> > > >    I just added my 2c to the bug as updating to updates-testing  
> > > > hasn't worked,hpoj and
> > > > hpijs together handle print and scan requirements.
> > > > Thanks  david
> > >
> > > I have a scanner that is seperate. It is not a scanner printer 
> > > combination. It is an HP 2100C model flatbed scanner and works fine 
> > > with the testing versions of the suggested programs installed.
> > >
> > > Since I don't have a combination unit and do not know if there are 
> > > seperate usb device nodes for the scanner and another for the printer 
> > > or if they use the same usb node for each device. It makes more sense 
> > > to me for the devices to have seperate nodes per device. Could it be 
> > > that the node for the scanner portion is not being set to the right 
> > > setting?
> > >
> > > sane-backends-1.0.15-1.4
> > > hotplug-2004_04_01-8.1
> > > pam-0.77-66.1
> > >
> > > Are the program versions that are supposed to get the permissions 
> > > setup correctly? It looks like you have these versions installed from 
> > > the addition to the bug report.
> > >
> > > Sorry that this remedy couldn't fix your problem. It sounds like 
> > > hpijs is not being loaded correctly. You might try searching bugzilla 
> > > for multi-function device entries.
> > >
> > > Jim
> >
> > Hi,
> >
> > I've a HP PSC 1315 and I've installed the HPLIP driver 
> > (http://hpinkjet.sourceforge.net/index.php), so the scanner works fine 
> > with xsane.
> >
> > Best regards,
> > Vinicius.
>
> Vinicius,
>             Do I need to uninstall the 'hpoj,hpijs'rpm's first or just 
> add hplip.I did see it at hpinkjet but it did'nt
> connect that it might be my answer.
>
> Thanks      david

I didn't uninstalled neither, I just compiled the HPLIP driver and 
followed the steps suggested.

[Jim Cornette]

david walcroft wrote:

On the bug report that I mislead you to for the particular scanner that 
you mentioned, a developer replied to your attention with this.

david walcroft: you need to install libsane-hpoj and set up hpoj.  Your 
problem is not related to this bug report.

When adding to a bug report, you need to add yourself to the CC. I lost 
track of a few for the oversight for other issues.

Just a pass-on and addition for others using similar hardware.

Jim

https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=121511

Usb scanner problem [SOLVED]

[david walcroft]

Jim Cornette wrote:
> david walcroft wrote:
>
> On the bug report that I mislead you to for the particular scanner 
> that you mentioned, a developer replied to your attention with this.
>
> david walcroft: you need to install libsane-hpoj and set up hpoj.  
> Your problem is not related to this bug report.
>
> When adding to a bug report, you need to add yourself to the CC. I 
> lost track of a few for the oversight for other issues.
>
> Just a pass-on and addition for others using similar hardware.
>
> Jim
>
> https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=121511

Thanks Jim,
 I didn't know about libsane-hpoj so yum installed it and away it goes.
Will test it in the morning.

david