On Saturday June 9 2007 10:37:32 pm Manal Helal wrote:
Hi
after installing Kino, I am having problems capturing files because of this message:
WARNING: *raw1394 kernel module not loaded or failure to read/write
/*dev/raw1394*!
To get my camera (JVC GR-DVL510EA) working in F7, I did the following...
sudo modprobe fw-ohci
Connect the camera.
Change permissions on device file - see below.
Start kino - The camera should be shown and operational now.
I've also changed permission on file "/dev/fwX" (/dev/fw0 on my machine) to allow non-root access to the firewire device. I've edited "/etc/security/console.perms.d/50-default.perms" and then I ran "sudo pam_console_apply" afterwards to achieve this.
Ken Solomon <kensol <at> internode.on.net> writes: ...
To get my camera (JVC GR-DVL510EA) working in F7, I did the following...
sudo modprobe fw-ohci
Connect the camera.
Change permissions on device file - see below.
Start kino - The camera should be shown and operational now.
I've also changed permission on file "/dev/fwX" (/dev/fw0 on my machine) to allow non-root access to the firewire device. I've edited "/etc/security/console.perms.d/50-default.perms" and then I ran "sudo pam_console_apply" afterwards to achieve this.
When I did this I got:
Found AV/C device with GUID 0x0080458031473db8
Message from syslogd@ at Mon Jul 16 15:09:17 2007 ... localhost kernel: Oops: 0000 [1] SMP Message from syslogd@ at Mon Jul 16 15:09:17 2007 ... localhost kernel: CR2: ffffffffffffffea
which does not look good to me at all (and it did not read my video).
Ken Solomon <kensol <at> internode.on.net> writes:
I've also changed permission on file "/dev/fwX" (/dev/fw0 on my machine) to allow non-root access to the firewire device. I've edited "/etc/security/console.perms.d/50-default.perms" and then I ran "sudo pam_console_apply" afterwards to achieve this.
can you post the modifications in 50-default.perms?
please, Thank you.
Ruben
-
Ken Solomon -
Martin -
ruben toledo