After I yum install compiz, and upon enabling the desktop effect, I
got the following error in dmesg:
compiz[9197]: segfault at 378e22ec10 ip 000000378e22ec10 sp
00007fff7d35fc88 error 14 in libICE.so.6.3.0[3790200000+17000]
Can someone help me out?
My machine:
/var/log/Xorg.0.log does not seem to have problem:
X.Org X Server 1.5.3
Release Date: 5 November 2008
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.18-92.1.18.el5 x86_64
Current Operating System: Linux orangelove 2.6.29 #25 SMP Tue Mar 31
18:06:55 SGT 2009 x86_64
Build Date: 11 December 2008 05:27:30PM
Build ID: xorg-x11-server 1.5.3-6.fc10
Before reporting problems, check
http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Wed Apr 1 07:10:20 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) No Layout section. Using the first Screen section.
(==) No screen section available. Using defaults.
(**) |-->Screen "Default Screen Section" (0)
(**) | |-->Monitor "<default monitor>"
(==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
(==) Automatically adding devices
(==) Automatically enabling devices
(==) No FontPath specified. Using compiled-in default.
(==) FontPath set to:
catalogue:/etc/X11/fontpath.d,
built-ins
(==) ModulePath set to "/usr/lib64/xorg/modules"
(II) Cannot locate a core pointer device.
(II) Cannot locate a core keyboard device.
(II) The server relies on HAL to provide the list of input devices.
If no devices become available, reconfigure HAL or disable
AllowEmptyInput.
(II) Open ACPI successful (/var/run/acpid.socket)
(II) Loader magic: 0x7aec60
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 4.1
X.Org XInput driver : 2.1
X.Org Server Extension : 1.1
X.Org Font Renderer : 0.6
(II) Loader running on linux
(++) using VT number 1
(--) PCI:*(0@3:0:0) nVidia Corporation GeForce 6500 rev 161, Mem @
0xfd000000/16777216, 0xc0000000/268435456, 0xfc000000/16777216, BIOS @
0x????????/131072
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[5] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[6] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[7] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[8] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[9] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[10] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[11] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[12] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[13] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[14] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
Motherboard is A8N32-SLI Deluxe, and Athlon dual-core:
processor : 0
vendor_id : AuthenticAMD
cpu family : 15
model : 35
model name : AMD Athlon(tm) 64 X2 Dual Core Processor 4800+
stepping : 2
cpu MHz : 2411.004
cache size : 1024 KB
physical id : 0
siblings : 2
core id : 0
cpu cores : 2
apicid : 0
initial apicid : 0
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov
pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt lm
3dnowext 3dnow rep_good pni lahf_lm cmp_legacy
bogomips : 4822.00
TLB size : 1024 4K pages
clflush size : 64
cache_alignment : 64
address sizes : 40 bits physical, 48 bits virtual
power management: ts fid vid ttp
processor : 1
vendor_id : AuthenticAMD
cpu family : 15
model : 35
model name : AMD Athlon(tm) 64 X2 Dual Core Processor 4800+
stepping : 2
cpu MHz : 2411.004
cache size : 1024 KB
physical id : 0
siblings : 2
core id : 1
cpu cores : 2
apicid : 1
initial apicid : 1
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov
pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt lm
3dnowext 3dnow rep_good pni lahf_lm cmp_legacy
bogomips : 4821.19
TLB size : 1024 4K pages
clflush size : 64
cache_alignment : 64
address sizes : 40 bits physical, 48 bits virtual
power management: ts fid vid ttp
lspci
00:00.0 RAM memory: nVidia Corporation C51 Host Bridge (rev a2)
00:00.1 RAM memory: nVidia Corporation C51 Memory Controller 0 (rev a2)
00:00.2 RAM memory: nVidia Corporation C51 Memory Controller 1 (rev a2)
00:00.3 RAM memory: nVidia Corporation C51 Memory Controller 5 (rev a2)
00:00.4 RAM memory: nVidia Corporation C51 Memory Controller 4 (rev a2)
00:00.5 RAM memory: nVidia Corporation C51 Host Bridge (rev a2)
00:00.6 RAM memory: nVidia Corporation C51 Memory Controller 3 (rev a2)
00:00.7 RAM memory: nVidia Corporation C51 Memory Controller 2 (rev a2)
00:02.0 PCI bridge: nVidia Corporation C51 PCI Express Bridge (rev a1)
00:03.0 PCI bridge: nVidia Corporation C51 PCI Express Bridge (rev a1)
00:04.0 PCI bridge: nVidia Corporation C51 PCI Express Bridge (rev a1)
00:09.0 Memory controller: nVidia Corporation CK804 Memory Controller (rev a4)
00:0a.0 ISA bridge: nVidia Corporation CK804 ISA Bridge (rev a4)
00:0a.1 SMBus: nVidia Corporation CK804 SMBus (rev a2)
00:0b.0 USB Controller: nVidia Corporation CK804 USB Controller (rev a2)
00:0b.1 USB Controller: nVidia Corporation CK804 USB Controller (rev a4)
00:0d.0 Multimedia audio controller: nVidia Corporation CK804 AC'97
Audio Controller (rev a2)
00:0f.0 IDE interface: nVidia Corporation CK804 IDE (rev f3)
00:10.0 IDE interface: nVidia Corporation CK804 Serial ATA Controller (rev f3)
00:11.0 IDE interface: nVidia Corporation CK804 Serial ATA Controller (rev f3)
00:12.0 PCI bridge: nVidia Corporation CK804 PCI Bridge (rev a2)
00:13.0 Bridge: nVidia Corporation CK804 Ethernet Controller (rev a3)
00:16.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3)
00:17.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3)
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8
[Athlon64/Opteron] HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8
[Athlon64/Opteron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8
[Athlon64/Opteron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8
[Athlon64/Opteron] Miscellaneous Control
01:00.0 RAID bus controller: Silicon Image, Inc. SiI 3132 Serial ATA
Raid II Controller (rev 01)
02:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8053
PCI-E Gigabit Ethernet Controller (rev 15)
03:00.0 VGA compatible controller: nVidia Corporation GeForce 6500 (rev a1)
04:0b.0 FireWire (IEEE 1394): Texas Instruments TSB43AB22/A
IEEE-1394a-2000 Controller (PHY/Link)
Not sure what else is needed. Does the graphic card support 3D? Or
the effect I choosed (like Wobbly windows, desktop cube, rotate cube)
required 3D?
My package from "yum list" are as follows (FC10, x86_64):
compiz.x86_64 0.7.8-4.fc10 installed
compiz-fusion.x86_64 0.7.8-2.fc10 installed
compiz-fusion-gnome.x86_64 0.7.8-2.fc10 installed
compiz-gnome.x86_64 0.7.8-4.fc10 installed
compizconfig-python.x86_64 0.7.8-1.fc10 installed
libcompizconfig.x86_64 0.7.8-1.fc10 installed
compiz.i386 0.7.8-7.fc10 updates
compiz.x86_64 0.7.8-7.fc10 updates
compiz-bcop.noarch 0.7.8-1.fc10 updates
compiz-devel.i386 0.7.8-7.fc10 updates
compiz-devel.x86_64 0.7.8-7.fc10 updates
compiz-fusion.x86_64 0.7.8-4.fc10 updates
compiz-fusion-devel.i386 0.7.8-4.fc10 updates
compiz-fusion-devel.x86_64 0.7.8-4.fc10 updates
compiz-fusion-extras.x86_64 0.7.8-3.fc10 updates
compiz-fusion-extras-devel.i386 0.7.8-3.fc10 updates
compiz-fusion-extras-devel.x86_64 0.7.8-3.fc10 updates
compiz-fusion-extras-gnome.x86_64 0.7.8-3.fc10 updates
compiz-fusion-gnome.x86_64 0.7.8-4.fc10 updates
compiz-gnome.x86_64 0.7.8-7.fc10 updates
compiz-kde.x86_64 0.7.8-7.fc10 updates
compiz-manager.noarch 0.6.0-8.fc10 fedora
compizconfig-backend-gconf.x86_64 0.7.8-1.fc10 updates
compizconfig-backend-kconfig.x86_64 0.7.8-1.fc10 updates
gnome-compiz-manager.i386 0.10.4-4.fc10 fedora
gnome-compiz-manager.x86_64 0.10.4-4.fc10 fedora
gnome-compiz-manager-devel.i386 0.10.4-4.fc10 fedora
gnome-compiz-manager-devel.x86_64 0.10.4-4.fc10 fedora
libcompizconfig.i386 0.7.8-1.fc10 updates
libcompizconfig-devel.i386 0.7.8-1.fc10 updates
libcompizconfig-devel.x86_64 0.7.8-1.fc10 updates
I have another x86 32bit FC10 Dell laptop with these features all running well.
Any Ideas?