I got a HP dv4 5306tx laptop with the UEFI+CSM mode enabled, and succeeded in installation of fedora 18 i686.
However, I failed to install nvidia driver. After I installed NVIDIA-Linux-x86-319.60.run(no error), the X cannot be started until I restore open source driver.
I have no idea about the exact reason for this. Does UEFI+CSM prohibit loading of Nvidia driver? AFAIK, the CSM mode is compatible with untrusted soft, and my fedora is not installed in UEFI mode.
Any advice will be appreciated. Thanks in advance.
On 11/04/2013 11:33 AM, WangWentao wrote:
However, I failed to install nvidia driver. After I installed NVIDIA-Linux-x86-319.60.run(no error), the X cannot be started until I restore open source driver.
Using the binary blob from nVidia is probably the worst way to go. Not only does it mangle several important system files, it has to be done again every time there's a kernel update. There's a much better "fire and forget" system that works for Fedora, and here's a link to one of the walkthroughs: http://forums.fedoraforum.org/showthread.php?t=204752
I have tried the repos version, but it doesn't work either.
There is also an intel card along with nvidia card, so it supports optimus, but I can't disable it in BIOS.
I have tried a few methods: * specify BusID in xorg.conf * remove nouveau module(blacklist+dracut) * increase vmalloc
However, there is only a very dark screen after boot.
在 2013-11-5，3:49，Joe Zeff joe@zeff.us 写道：
On 11/04/2013 11:33 AM, WangWentao wrote:
However, I failed to install nvidia driver. After I installed NVIDIA-Linux-x86-319.60.run(no error), the X cannot be started until I restore open source driver.
Using the binary blob from nVidia is probably the worst way to go. Not only does it mangle several important system files, it has to be done again every time there's a kernel update. There's a much better "fire and forget" system that works for Fedora, and here's a link to one of the walkthroughs: http://forums.fedoraforum.org/showthread.php?t=204752
users mailing list users@lists.fedoraproject.org To unsubscribe or change subscription options: https://admin.fedoraproject.org/mailman/listinfo/users Fedora Code of Conduct: http://fedoraproject.org/code-of-conduct Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines Have a question? Ask away: http://ask.fedoraproject.org
On Tue, 2013-11-05 at 21:08 +0800, WangWentao wrote:
I have tried the repos version, but it doesn't work either.
There is also an intel card along with nvidia card, so it supports optimus, but I can't disable it in BIOS.
Just FYI, there is a pilot project to support Optimus here: https://urldefense.proofpoint.com/v1/url?u=http://bumblebee-project.org/&.... I'm using it and the Intel driver seems fine. On my system, the disadvantage is that the external display is attached to the nVidia driver, so I can't use it without some hacking around that I haven't had time to do. The other disadvantage is that driver switching isn't seamless. You need to invoke programs you want to run on the nVidia card with a wrapper program.
I have tried a few methods:
- specify BusID in xorg.conf
- remove nouveau module(blacklist+dracut)
- increase vmalloc
However, there is only a very dark screen after boot.
在 2013-11-5，3:49，Joe Zeff joe@zeff.us 写道：
On 11/04/2013 11:33 AM, WangWentao wrote:
However, I failed to install nvidia driver. After I installed NVIDIA-Linux-x86-319.60.run(no error), the X cannot be started until I restore open source driver.
Using the binary blob from nVidia is probably the worst way to go. Not only does it mangle several important system files, it has to be done again every time there's a kernel update. There's a much better "fire and forget" system that works for Fedora, and here's a link to one of the walkthroughs: https://urldefense.proofpoint.com/v1/url?u=http://forums.fedoraforum.org/sho...
users mailing list users@lists.fedoraproject.org To unsubscribe or change subscription options: https://urldefense.proofpoint.com/v1/url?u=https://admin.fedoraproject.org/m... Fedora Code of Conduct: https://urldefense.proofpoint.com/v1/url?u=http://fedoraproject.org/code-of-... Guidelines: https://urldefense.proofpoint.com/v1/url?u=http://fedoraproject.org/wiki/Mai... Have a question? Ask away: https://urldefense.proofpoint.com/v1/url?u=http://ask.fedoraproject.org/&...
It's actually a dual cards(intel+nvidia) problem. I know there are supports for optimus in newest kernel/xorg/nvidia .
According to http://nouveau.freedesktop.org/wiki/Optimus/, new kernel supports seamless switch between intel graphics driver and nouveau.
About nvidia http://us.download.nvidia.com/XFree86/Linux-x86/319.12/README/randr14.html
I have not tried them yet, which seem better options than bumblebee.
在 2013-11-6，6:51，Matthew Saltzman mjs@clemson.edu 写道：
On Tue, 2013-11-05 at 21:08 +0800, WangWentao wrote:
I have tried the repos version, but it doesn't work either.
There is also an intel card along with nvidia card, so it supports optimus, but I can't disable it in BIOS.
Just FYI, there is a pilot project to support Optimus here: https://urldefense.proofpoint.com/v1/url?u=http://bumblebee-project.org/&.... I'm using it and the Intel driver seems fine. On my system, the disadvantage is that the external display is attached to the nVidia driver, so I can't use it without some hacking around that I haven't had time to do. The other disadvantage is that driver switching isn't seamless. You need to invoke programs you want to run on the nVidia card with a wrapper program.
I have tried a few methods:
- specify BusID in xorg.conf
- remove nouveau module(blacklist+dracut)
- increase vmalloc
However, there is only a very dark screen after boot.
在 2013-11-5，3:49，Joe Zeff joe@zeff.us 写道：
On 11/04/2013 11:33 AM, WangWentao wrote:
However, I failed to install nvidia driver. After I installed NVIDIA-Linux-x86-319.60.run(no error), the X cannot be started until I restore open source driver.
Using the binary blob from nVidia is probably the worst way to go. Not only does it mangle several important system files, it has to be done again every time there's a kernel update. There's a much better "fire and forget" system that works for Fedora, and here's a link to one of the walkthroughs: https://urldefense.proofpoint.com/v1/url?u=http://forums.fedoraforum.org/sho...
users mailing list users@lists.fedoraproject.org To unsubscribe or change subscription options: https://urldefense.proofpoint.com/v1/url?u=https://admin.fedoraproject.org/m... Fedora Code of Conduct: https://urldefense.proofpoint.com/v1/url?u=http://fedoraproject.org/code-of-... Guidelines: https://urldefense.proofpoint.com/v1/url?u=http://fedoraproject.org/wiki/Mai... Have a question? Ask away: https://urldefense.proofpoint.com/v1/url?u=http://ask.fedoraproject.org/&...
-- Matthew Saltzman Clemson University Math Sciences mjs AT clemson DOT edu
-- users mailing list users@lists.fedoraproject.org To unsubscribe or change subscription options: https://admin.fedoraproject.org/mailman/listinfo/users Fedora Code of Conduct: http://fedoraproject.org/code-of-conduct Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines Have a question? Ask away: http://ask.fedoraproject.org
On Tue, 2013-11-05 at 22:51 +0000, Matthew Saltzman wrote:
https://urldefense.proofpoint.com/v1/url?u=http://bumblebee-project.org/&....
My apologies on behalf of the NSA wannabees in my employer's IT department. I think they've realized the error of their ways, so I will try again. The URL is
or if it gets hijacked again,
http COLON SLASH SLASH bumblebee-project DOT org
If the newest kernel is going to support Optimus, that will be excellent, although it looks like there is some work to be done yet. I hope we get a chance to try it in Fedora 19.
-
Joe Zeff -
Matthew Saltzman -
WangWentao