Hi,
I'm having a laptop HP Compaq 6710b running on Fedora 8 with the latest updates. I have an issue that when I press the lid button, the Laptop get freeze and the possible way is to recover -- hard power reset. I noticed that this is due to the video card driver which is Intel 965GM. I changed to some other diver vesa and it is working fine. And other thing I checked, if I shut the ACPI (acpi=off) everything is fine but I loss lots of features on my laptop.
I download the Intel drivers from the http://intellinuxgraphics.org/download.html and compiled it. xf86-video-intel and drm. Then it is started to work. But if I run the system-config-display and save the xorg.conf with Intel driver, it freezes again. And only recovering is re-compiling the drm and xf86-video-intel. I can't install the meas for 3D GL driver too -- giving compilation issue.
Please let me know if someone has working config with Intel Mobile GM 960 driver with mesa.
Thanks in advance
-+> Hirantha
lspci-- 00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub (rev 0c) 00:02.0 VGA compatible controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (rev 0c) 00:02.1 Display controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (rev 0c) 00:1a.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Contoller #4 (rev 03) 00:1a.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 (rev 03) 00:1a.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 (rev 03) 00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03) 00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 03) 00:1c.1 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 (rev 03) 00:1c.2 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 3 (rev 03) 00:1c.4 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 5 (rev 03) 00:1d.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 (rev 03) 00:1d.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 (rev 03) 00:1d.2 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 (rev 03) 00:1d.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 (rev 03) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev f3) 00:1f.0 ISA bridge: Intel Corporation 82801HEM (ICH8M) LPC Interface Controller (rev 03) 00:1f.1 IDE interface: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) IDE Controller (rev 03) 00:1f.2 SATA controller: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) SATA AHCI Controller (rev 03) 02:04.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev b6) 02:04.1 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 02) 10:00.0 Network controller: Broadcom Corporation BCM4312 802.11a/b/g (rev 02) 18:00.0 Ethernet controller: Broadcom Corporation NetLink BCM5787M Gigabit Ethernet PCI Express (rev 02)
dmesg Linux version 2.6.23.14-107.fc8 (mockbuild@xenbuilder4.fedora.phx.redhat.com) (gcc version 4.1.2 20070925 (Red Hat 4.1.2-33)) #1 SMP Mon Jan 14 21:37:30 ES T 2008 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000005f7b0000 (usable) BIOS-e820: 000000005f7b0000 - 000000005f7c5400 (reserved) BIOS-e820: 000000005f7c5400 - 000000005f7e7fb8 (ACPI NVS) BIOS-e820: 000000005f7e7fb8 - 0000000060000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fed20000 - 00000000fed9a000 (reserved) BIOS-e820: 00000000feda0000 - 00000000fedc0000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ffb00000 - 00000000ffc00000 (reserved) BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) 631MB HIGHMEM available. 896MB LOWMEM available. Using x86 segment limits to approximate NX protection Entering add_active_range(0, 0, 391088) 0 entries of 256 used Zone PFN ranges: DMA 0 -> 4096 Normal 4096 -> 229376 HighMem 229376 -> 391088 Movable zone start PFN for each node early_node_map[1] active PFN ranges 0: 0 -> 391088 On node 0 totalpages: 391088 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 4064 pages, LIFO batch:0 Normal zone: 1760 pages used for memmap Normal zone: 223520 pages, LIFO batch:31 HighMem zone: 1263 pages used for memmap HighMem zone: 160449 pages, LIFO batch:31 Movable zone: 0 pages used for memmap DMI 2.4 present. Using APIC driver default ACPI: RSDP 000FC600, 0024 (r2 HP ) ACPI: XSDT 5F7C81C8, 007C (r1 HPQOEM SLIC-MPC 1 HP 1) ACPI: FACP 5F7C8084, 00F4 (r4 HP 30C0 3 HP 1) ACPI: DSDT 5F7C84CC, 12CEE (r1 HP nc75xx 10000 MSFT 3000001) ACPI: FACS 5F7E7D80, 0040 ACPI: SLIC 5F7C8244, 0176 (r1 HPQOEM SLIC-MPC 1 HP 1) ACPI: HPET 5F7C83BC, 0038 (r1 HP 30C0 1 HP 1) ACPI: APIC 5F7C83F4, 0068 (r1 HP 30C0 1 HP 1) ACPI: MCFG 5F7C845C, 003C (r1 HP 30C0 1 HP 1) ACPI: TCPA 5F7C8498, 0032 (r2 HP 30C0 1 HP 1) ACPI: SSDT 5F7DB1BA, 0059 (r1 HP HPQNLP 1 MSFT 3000001) ACPI: SSDT 5F7DB213, 0328 (r1 HP HPQSAT 1 MSFT 3000001) ACPI: SSDT 5F7DBDC1, 025F (r1 HP Cpu0Tst 3000 INTL 20060317) ACPI: SSDT 5F7DC020, 00A6 (r1 HP Cpu1Tst 3000 INTL 20060317) ACPI: SSDT 5F7DC0C6, 04D7 (r1 HP CpuPm 3000 INTL 20060317) ACPI: PM-Timer IO Port: 0x1008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Processor #0 6:15 APIC version 20 ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) Processor #1 6:15 APIC version 20 ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs ACPI: HPET id: 0x8086a201 base: 0xfed00000 Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 70000000 (gap: 60000000:9ec00000) swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000 swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e0000 swsusp: Registered nosave memory region: 00000000000e0000 - 0000000000100000 Built 1 zonelists in Zone order. Total pages: 388033 Kernel command line: ro root=LABEL=/1 rhgb quiet mapped APIC to ffffb000 (fee00000) mapped IOAPIC to ffffa000 (fec00000) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 CPU 0 irqstacks, hard=c07a8000 soft=c0788000 PID hash table entries: 4096 (order: 12, 16384 bytes) Detected 1995.106 MHz processor. Console: colour VGA+ 80x25 console [tty0] enabled Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 1542660k/1564352k available (2185k kernel code, 20480k reserved, 1116k data, 280k init, 646848k highmem) virtual kernel memory layout: fixmap : 0xffc53000 - 0xfffff000 (3760 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) .init : 0xc073f000 - 0xc0785000 ( 280 kB) .data : 0xc062250d - 0xc0739544 (1116 kB) .text : 0xc0400000 - 0xc062250d (2185 kB) Checking if this processor honours the WP bit even in supervisor mode... Ok. SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1 hpet clockevent registered Calibrating delay using timer specific routine.. 3993.47 BogoMIPS (lpj=1996737) Security Framework v1.0.0 initialized SELinux: Initializing. SELinux: Starting in permissive mode selinux_register_security: Registering secondary module capability Capability LSM initialized as secondary Mount-cache hash table entries: 512 CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001 00000001 monitor/mwait feature present. using mwait in idle threads. CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 2048K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 CPU: After all inits, caps: bfebf3ff 20100000 00000000 00003940 0000e3bd 00000000 00000001 00000001 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Compat vDSO mapped to ffffe000. Checking 'hlt' instruction... OK. SMP alternatives: switching to UP code ACPI: Core revision 20070126 CPU0: Intel(R) Core(TM)2 Duo CPU T7250 @ 2.00GHz stepping 0d SMP alternatives: switching to SMP code Booting processor 1/1 eip 3000 CPU 1 irqstacks, hard=c07a9000 soft=c0789000 Initializing CPU#1 Calibrating delay using timer specific routine.. 3989.98 BogoMIPS (lpj=1994991) CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001 00000001 monitor/mwait feature present. CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 2048K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU: After all inits, caps: bfebf3ff 20100000 00000000 00003940 0000e3bd 00000000 00000001 00000001 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#1. CPU1: Intel(R) Core(TM)2 Duo CPU T7250 @ 2.00GHz stepping 0d Total of 2 processors activated (7983.45 BogoMIPS). ENABLING IO-APIC IRQs ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 checking TSC synchronization [CPU#0 -> CPU#1]: passed. Brought up 2 CPUs sizeof(vma)=84 bytes sizeof(page)=32 bytes sizeof(inode)=336 bytes sizeof(dentry)=132 bytes sizeof(ext3inode)=488 bytes sizeof(buffer_head)=56 bytes sizeof(skbuff)=180 bytes sizeof(task_struct)=1552 bytes HP Compaq Laptop series board detected. Selecting BIOS-method for reboots. Booting paravirtualized kernel on bare hardware Time: 16:28:19 Date: 01/30/08 NET: Registered protocol family 16 No dock devices found. ACPI: bus type pci registered PCI: PCI BIOS revision 2.10 entry at 0xf0322, last bus=40 PCI: Using configuration type 1 Setting up standard PCI resources ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62 ACPI: PCI Root Bridge [C003] (0000:00) PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [_SB_.C003._PRT] ACPI: PCI Interrupt Routing Table [_SB_.C003.C0B0._PRT] ACPI: PCI Interrupt Routing Table [_SB_.C003.C11D._PRT] ACPI: PCI Interrupt Routing Table [_SB_.C003.C131._PRT] ACPI: PCI Interrupt Routing Table [_SB_.C003.C132._PRT] ACPI: PCI Interrupt Routing Table [_SB_.C003.C134._PRT] ACPI: PCI Interrupt Link [C12D] (IRQs 10 11) *5 ACPI: PCI Interrupt Link [C12E] (IRQs *10 11) ACPI: PCI Interrupt Link [C12F] (IRQs 10 *11) ACPI: PCI Interrupt Link [C130] (IRQs 10 11) *0, disabled. ACPI: PCI Interrupt Link [C140] (IRQs *10 11) ACPI: PCI Interrupt Link [C141] (IRQs *10 11) ACPI: PCI Interrupt Link [C142] (IRQs 10 11) *0, disabled. ACPI Exception (pci_link-0184): AE_NOT_FOUND, Evaluating _PRS [20070126] ACPI: Power Resource [C27F] (on) ACPI: Power Resource [C29B] (on) ACPI: Power Resource [C1C5] (off) ACPI: Power Resource [C3B7] (off) ACPI: Power Resource [C3B8] (off) ACPI: Power Resource [C3B9] (off) ACPI: Power Resource [C3BA] (off) ACPI: Power Resource [C3BB] (off) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 15 devices ACPI: ACPI bus type pnp unregistered usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 hpet0: 3 64-bit timers, 14318180 Hz Time: tsc clocksource has been installed. pnp: 00:00: iomem range 0x0-0x9ffff could not be reserved pnp: 00:00: iomem range 0xe0000-0xfffff could not be reserved pnp: 00:00: iomem range 0x100000-0x5f7fffff could not be reserved pnp: 00:0b: iomem range 0xffb00000-0xffbfffff could not be reserved pnp: 00:0b: iomem range 0xfff00000-0xffffffff could not be reserved pnp: 00:0d: ioport range 0x4d0-0x4d1 has been reserved pnp: 00:0d: ioport range 0x1000-0x107f has been reserved pnp: 00:0d: ioport range 0x1100-0x113f has been reserved pnp: 00:0d: ioport range 0x1200-0x121f has been reserved pnp: 00:0d: iomem range 0xf8000000-0xfbffffff has been reserved pnp: 00:0d: iomem range 0xfec00000-0xfec000ff could not be reserved pnp: 00:0d: iomem range 0xfed20000-0xfed3ffff could not be reserved pnp: 00:0d: iomem range 0xfed45000-0xfed8ffff could not be reserved pnp: 00:0e: iomem range 0xcee00-0xcffff has been reserved pnp: 00:0e: iomem range 0xfeda0000-0xfedbffff could not be reserved pnp: 00:0e: iomem range 0xfee00000-0xfee00fff could not be reserved PCI: Bridge: 0000:00:1c.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:1c.1 IO window: disabled. MEM window: e4100000-e41fffff PREFETCH window: disabled. PCI: Bridge: 0000:00:1c.2 IO window: disabled. MEM window: e4000000-e40fffff PREFETCH window: disabled. PCI: Bridge: 0000:00:1c.4 IO window: 2000-3fff MEM window: e0000000-e3ffffff PREFETCH window: disabled. PCI: Bus 3, cardbus bridge: 0000:02:04.0 IO window: 00001400-000014ff IO window: 00001800-000018ff PREFETCH window: 70000000-73ffffff MEM window: 74000000-77ffffff PCI: Bridge: 0000:00:1e.0 IO window: disabled. MEM window: e4200000-e45fffff PREFETCH window: disabled. ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1c.0 to 64 ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:1c.1 to 64 ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1c.2 to 64 ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1c.4 to 64 PCI: Setting latency timer of device 0000:00:1e.0 to 64 ACPI: PCI Interrupt 0000:02:04.0[A] -> GSI 16 (level, low) -> IRQ 16 NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1572864 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered Switched to high resolution mode on CPU 1 checking if image is initramfs...<6>Switched to high resolution mode on CPU 0 it is Freeing initrd memory: 2929k freed apm: BIOS not found. audit: initializing netlink socket (disabled) audit(1201710499.723:1): initialized highmem bounce pool size: 64 pages Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) SELinux: Registering netfilter hooks ksign: Installing public key data Loading keyring - Added public key 75B2EDBADB2FF0B - User ID: Red Hat, Inc. (Kernel Module GPG key) Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) Boot video device is 0000:00:02.0 PCI: Setting latency timer of device 0000:00:1c.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.0:pcie00] PCI: Setting latency timer of device 0000:00:1c.1 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.1:pcie00] Allocate Port Service[0000:00:1c.1:pcie02] PCI: Setting latency timer of device 0000:00:1c.2 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.2:pcie00] Allocate Port Service[0000:00:1c.2:pcie02] PCI: Setting latency timer of device 0000:00:1c.4 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.4:pcie00] Allocate Port Service[0000:00:1c.4:pcie02] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 ACPI: Transitioning device [C3BC] to D3 ACPI: Transitioning device [C3BC] to D3 ACPI: Fan [C3BC] (off) ACPI: Transitioning device [C3BD] to D3 ACPI: Transitioning device [C3BD] to D3 ACPI: Fan [C3BD] (off) ACPI: Transitioning device [C3BE] to D3 ACPI: Transitioning device [C3BE] to D3 ACPI: Fan [C3BE] (off) ACPI: Transitioning device [C3BF] to D3 ACPI: Transitioning device [C3BF] to D3 ACPI: Fan [C3BF] (off) ACPI: Transitioning device [C3C0] to D3 ACPI: Transitioning device [C3C0] to D3 ACPI: Fan [C3C0] (off) ACPI: SSDT 5F7DB603, 027F (r1 HP Cpu0Ist 3000 INTL 20060317) ACPI: SSDT 5F7DB907, 04BA (r1 HP Cpu0Cst 3001 INTL 20060317) Monitor-Mwait will be used to enter C-1 state Monitor-Mwait will be used to enter C-2 state Monitor-Mwait will be used to enter C-3 state ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) ACPI: Processor [CPU0] (supports 8 throttling states) ACPI: SSDT 5F7DB53B, 00C8 (r1 HP Cpu1Ist 3000 INTL 20060317) ACPI: SSDT 5F7DB882, 0085 (r1 HP Cpu1Cst 3000 INTL 20060317) ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) ACPI: Processor [CPU1] (supports 8 throttling states) ACPI: Thermal Zone [TZ0] (55 C) ACPI: Thermal Zone [TZ1] (58 C) ACPI: Thermal Zone [TZ3] (46 C) ACPI: Thermal Zone [TZ4] (29 C) ACPI: Thermal Zone [TZ5] (49 C) isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Real Time Clock Driver v1.12ac hpet_resources: 0xfed00000 is busy Non-volatile memory driver v1.2 Linux agpgart interface v0.102 agpgart: Detected an Intel 965GM Chipset. agpgart: Detected 7676K stolen memory. agpgart: AGP aperture is 256M @ 0xd0000000 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize input: Macintosh mouse button emulation as /class/input/input0 Yenta: CardBus bridge found at 0000:02:04.0 [103c:30c0] Yenta: ISA IRQ mask 0x04b8, PCI irq 16 Socket status: 30000006 Yenta: Raising subordinate bus# of parent bus (#02) from #03 to #06 pcmcia: parent PCI bridge Memory window: 0xe4200000 - 0xe45fffff PNP: PS/2 Controller [PNP0303:C298,PNP0f13:C299] at 0x60,0x64 irq 1,12 i8042.c: Detected active multiplexing controller, rev 1.1. serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX0 port at 0x60,0x64 irq 12 serio: i8042 AUX1 port at 0x60,0x64 irq 12 serio: i8042 AUX2 port at 0x60,0x64 irq 12 serio: i8042 AUX3 port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice cpuidle: using governor menu usbcore: registered new interface driver hiddev Marking TSC unstable due to: TSC halts in idle. usbcore: registered new interface driver usbhid drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver TCP cubic registered Initializing XFRM netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 Using IPI No-Shortcut mode Magic number: 8:845:490 Freeing unused kernel memory: 280k freed Write protecting the kernel read-only data: 845k Time: hpet clocksource has been installed. ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1a.7 to 64 ehci_hcd 0000:00:1a.7: EHCI Host Controller ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1a.7: debug port 1 PCI: cache line size of 32 is not supported by device 0000:00:1a.7 ehci_hcd 0000:00:1a.7: irq 18, io mem 0xe4800000 ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 4 ports detected ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 ehci_hcd 0000:00:1d.7: debug port 1 PCI: cache line size of 32 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: irq 19, io mem 0xe4808000 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 6 ports detected ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver USB Universal Host Controller Interface driver v3.0 ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1a.0 to 64 uhci_hcd 0000:00:1a.0: UHCI Host Controller uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1a.0: irq 16, io base 0x00004020 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 17 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:1a.1 to 64 uhci_hcd 0000:00:1a.1: UHCI Host Controller uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1a.1: irq 17, io base 0x00004040 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected Synaptics Touchpad, model: 1, fw: 6.2, id: 0x2580b1, caps: 0xa04793/0x300000 serio: Synaptics pass-through port at isa0060/serio4/input0 input: SynPS/2 Synaptics TouchPad as /class/input/input1 input: AT Translated Set 2 keyboard as /class/input/input2 ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1d.0: irq 19, io base 0x00004060 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 21 (level, low) -> IRQ 20 PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6 uhci_hcd 0000:00:1d.1: irq 20, io base 0x00004080 usb usb6: configuration #1 chosen from 1 choice hub 6-0:1.0: USB hub found hub 6-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7 uhci_hcd 0000:00:1d.2: irq 18, io base 0x000040a0 usb usb7: configuration #1 chosen from 1 choice hub 7-0:1.0: USB hub found hub 7-0:1.0: 2 ports detected SCSI subsystem initialized libata version 2.21 loaded. ahci 0000:00:1f.2: version 2.3 ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 17 (level, low) -> IRQ 17 ahci 0000:00:1f.2: nr_ports (3) and implemented port map (0x1) don't match usb 5-1: new low speed USB device using uhci_hcd and address 2 usb 5-1: configuration #1 chosen from 1 choice input: Logitech Logitech USB Optical Mouse as /class/input/input3 input: USB HID v1.11 Mouse [Logitech Logitech USB Optical Mouse] on usb-0000:00:1d.0-1 usb 5-2: new full speed USB device using uhci_hcd and address 3 usb 5-2: configuration #1 chosen from 1 choice ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x1 impl SATA mode ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part PCI: Setting latency timer of device 0000:00:1f.2 to 64 scsi0 : ahci ata1: SATA max UDMA/133 cmd 0xf886e100 ctl 0x00000000 bmdma 0x00000000 irq 219 ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: ATA-7: Hitachi HTS541612J9SA00, SBDOC7BP, max UDMA/100 ata1.00: 234441648 sectors, multi 16: LBA48 ata1.00: configured for UDMA/100 scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54161 SBDO PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: [sda] Attached SCSI disk ata_piix 0000:00:1f.1: version 2.12 ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1f.1 to 64 scsi1 : ata_piix scsi2 : ata_piix ata2: PATA max UDMA/100 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x000140c0 irq 14 ata3: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x000140c8 irq 15 ata2.00: ATAPI: MATSHITADVD-RAM UJ-860H, 1.02, max MWDMA2 ata2.00: configured for MWDMA2 ata3: port disabled. ignoring. scsi 1:0:0:0: CD-ROM MATSHITA DVD-RAM UJ-860H 1.02 PQ: 0 ANSI: 5 kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. SELinux: Disabled at runtime. SELinux: Unregistering netfilter hooks audit(1201710509.654:2): selinux=0 auid=4294967295 Clocksource tsc unstable (delta = -123452501 ns) sd 0:0:0:0: Attached scsi generic sg0 type 0 scsi 1:0:0:0: Attached scsi generic sg1 type 5 sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 1:0:0:0: Attached scsi CD-ROM sr0 cs: IO port probe 0x100-0x3af: excluding 0x378-0x37f cs: IO port probe 0x3e0-0x4ff: clean. cs: IO port probe 0x820-0x8ff: clean. cs: IO port probe 0xc00-0xcf7: clean. cs: IO port probe 0xa00-0xaff: clean. ACPI: PCI Interrupt 0000:10:00.0[A] -> GSI 17 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:10:00.0 to 64 ssb: Sonics Silicon Backplane found on PCI device 0000:10:00.0 input: PC Speaker as /class/input/input4 tg3.c:v3.81.1 (October 18, 2007) ACPI: PCI Interrupt 0000:18:00.0[A] -> GSI 18 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:18:00.0 to 64 parport_pc 00:02: reported by Plug and Play ACPI parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE] ACPI: AC Adapter [C239] (on-line) input: Video Bus as /class/input/input5 ACPI: Video Device [C098] (multi-head: yes rom: no post: no) ACPI: Battery Slot [C23B] (battery present) ACPI: Battery Slot [C23A] (battery absent) input: Power Button (FF) as /class/input/input6 ACPI: Power Button (FF) [PWRF] input: Sleep Button (CM) as /class/input/input7 ACPI: Sleep Button (CM) [C2BF] input: Lid Switch as /class/input/input8 ACPI: Lid Switch [C153] tpm_inf_pnp 00:03: Found C280 with ID IFX0102 tpm_inf_pnp 00:03: TPM found: config base 0x560, data base 0x570, chip version 0x000b, vendor id 0x15d1 (Infineon), product id 0x000b (SLB 9635 TT 1.2) eth0: Tigon3 [partno(none) rev b002 PHY(5787)] (PCI Express) 10/100/1000Base-T Ethernet 00:1a:4b:76:a8:c1 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[1] eth0: dma_rwctrl[76180000] dma_mask[64-bit] ACPI: PCI Interrupt 0000:02:04.1[B] -> GSI 17 (level, low) -> IRQ 17 firewire_ohci: Added fw-ohci device 0000:02:04.1, OHCI version 1.10 b43-phy0: Broadcom 4311 WLAN found b43-phy0 debug: Found PHY: Analog 4, Type 2, Revision 9 b43-phy0 debug: Found Radio: Manuf 0x17F, Version 0x2050, Revision 2 phy0: Selected rate control algorithm 'pid' ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1b.0 to 64 si3054: cannot initialize. EXT MID = 0000 firewire_core: created new fw device fw0 (0 config rom retries, S400) kvm: disabled by bios NET: Registered protocol family 10 lo: Disabled Privacy Extensions ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16 device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com device-mapper: multipath: version 1.0.5 loaded EXT3 FS on sda3, internal journal kjournald starting. Commit interval 5 seconds EXT3 FS on sda2, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on sda1, internal journal EXT3-fs: mounted filesystem with ordered data mode. Adding 1052216k swap on /dev/sda5. Priority:-1 extents:1 across:1052216k ip6_tables: (C) 2000-2006 Netfilter Core Team Netfilter messages via NETLINK v0.30. nf_conntrack version 0.5.0 (16384 buckets, 65536 max) ip_tables: (C) 2000-2006 Netfilter Core Team ADDRCONF(NETDEV_UP): eth0: link is not ready tg3: eth0: Link is up at 100 Mbps, full duplex. tg3: eth0: Flow control is on for TX and on for RX. ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready audit(1201690727.849:3): audit_pid=2039 old=0 by auid=4294967295 Bluetooth: Core ver 2.11 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: L2CAP ver 2.8 Bluetooth: L2CAP socket layer initialized Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM TTY layer initialized Bluetooth: RFCOMM ver 1.8 Bridge firewalling registered virbr0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature. eth0: no IPv6 routers present [drm] Initialized drm 1.1.0 20060810 [drm] Initialized i915 1.6.0 20060119 on minor 0 virbr0: no IPv6 routers present NET: Registered protocol family 4 NET: Registered protocol family 5 cisco_ipsec: module license 'Proprietary' taints kernel. Cisco Systems VPN Client Version 4.8.01 (0640) kernel module loaded cipsec0: no IPv6 routers present Cisco Systems VPN Client Version 4.8.01 (0640) kernel module loaded cipsec0: no IPv6 routers present cipsec0: no IPv6 routers present IPv6 over IPv4 tunneling driver sit0: Disabled Privacy Extensions ADDRCONF(NETDEV_UP): eth0: link is not ready tg3: eth0: Link is up at 100 Mbps, full duplex. tg3: eth0: Flow control is on for TX and on for RX. ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready eth0: no IPv6 routers present cipsec0: no IPv6 routers present cipsec0: no IPv6 routers present cipsec0: no IPv6 routers present cipsec0: no IPv6 routers present cipsec0: no IPv6 routers present cipsec0: no IPv6 routers present Monitor-Mwait will be used to enter C-3 state tg3: eth0: Link is down. tg3: eth0: Link is up at 100 Mbps, full duplex. tg3: eth0: Flow control is on for TX and on for RX. tg3: eth0: Link is down. usb 5-1: USB disconnect, address 2 ADDRCONF(NETDEV_UP): eth0: link is not ready tg3: eth0: Link is up at 100 Mbps, full duplex. tg3: eth0: Flow control is off for TX and off for RX. ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready eth0: no IPv6 routers present tg3: eth0: Link is down. usb 5-1: new low speed USB device using uhci_hcd and address 4 usb 5-1: configuration #1 chosen from 1 choice input: Logitech Logitech USB Optical Mouse as /class/input/input9 input: USB HID v1.11 Mouse [Logitech Logitech USB Optical Mouse] on usb-0000:00:1d.0-1 tg3: eth0: Link is up at 100 Mbps, full duplex. tg3: eth0: Flow control is off for TX and off for RX.
hirantha wrote:
Hi,
I'm having a laptop HP Compaq 6710b running on Fedora 8 with the latest updates. I have an issue that when I press the lid button, the Laptop get freeze and the possible way is to recover -- hard power reset. I noticed that this is due to the video card driver which is Intel 965GM. I changed to some other diver vesa and it is working fine. And other thing I checked, if I shut the ACPI (acpi=off) everything is fine but I loss lots of features on my laptop.
I download the Intel drivers from the http://intellinuxgraphics.org/download.html and compiled it. xf86-video-intel and drm. Then it is started to work. But if I run the system-config-display and save the xorg.conf with Intel driver, it freezes again. And only recovering is re-compiling the drm and xf86-video-intel. I can't install the meas for 3D GL driver too -- giving compilation issue.
Please let me know if someone has working config with Intel Mobile GM 960 driver with mesa.
Thanks in advance
-+> Hirantha
You may want to edit /etc/acpi/events/video.conf and see it that fixes the problem without having to compile your own driver.
Mikkel
Hi Mikkel,
Thanks for the post. I have check this before compiling the driver. In first press button - no harm , working fine. But if press it again, laptop get freeze; and trigger a kernel panic. here is the info i get.
Code: Bad EIP Value. EIP: [<7f7e7dc4>] 0x7f7fe7dc4 SS:ESP 0068:f7c7aca4 Kernel Panic - not syncing: Attempted to kill the idle task!
I have no issue when scpi=off, non-intel driver. I can't use any other driver because wide-screen is not supporting
Please advice..
Thanks and regards
-+> hirantha
Mikkel L. Ellertson wrote:
hirantha wrote:
Hi,
I'm having a laptop HP Compaq 6710b running on Fedora 8 with the latest updates. I have an issue that when I press the lid button, the Laptop get freeze and the possible way is to recover -- hard power reset. I noticed that this is due to the video card driver which is Intel 965GM. I changed to some other diver vesa and it is working fine. And other thing I checked, if I shut the ACPI (acpi=off) everything is fine but I loss lots of features on my laptop.
I download the Intel drivers from the http://intellinuxgraphics.org/download.html and compiled it. xf86-video-intel and drm. Then it is started to work. But if I run the system-config-display and save the xorg.conf with Intel driver, it freezes again. And only recovering is re-compiling the drm and xf86-video-intel. I can't install the meas for 3D GL driver too -- giving compilation issue.
Please let me know if someone has working config with Intel Mobile GM 960 driver with mesa.
Thanks in advance
-+> Hirantha
You may want to edit /etc/acpi/events/video.conf and see it that fixes the problem without having to compile your own driver.
Mikkel
On Fri, 2008-02-01 at 11:07 +0530, hirantha wrote:
Hi Mikkel,
Thanks for the post. I have check this before compiling the driver.
Please don't top-post. Please read: http://fedoraproject.org/wiki/Communicate/MailingListGuidelines Then enjoy. Ric
hirantha wrote:
Mikkel L. Ellertson wrote:
hirantha wrote:
I'm having a laptop HP Compaq 6710b running on Fedora 8 with the latest updates. I have an issue that when I press the lid button, the Laptop get freeze and the possible way is to recover -- hard power
What are you expecting the machine to do when you close the lid ?
On my HP nx6320, Fedora defaults to doing a suspend on lid close. Since suspend/resume has not been working reliably over time {and I can't afford to lose information}, I turn this off:
system|preferences|system|power management [gnome-power-preferences]
on ac power |actions|when laptop lid is closed=blank screen on battery power|actions|when laptop lid is closed=blank screen
DaveT.
David Timms wrote:
hirantha wrote:
Mikkel L. Ellertson wrote:
hirantha wrote:
I'm having a laptop HP Compaq 6710b running on Fedora 8 with the latest updates. I have an issue that when I press the lid button, the Laptop get freeze and the possible way is to recover -- hard power
What are you expecting the machine to do when you close the lid ?
On my HP nx6320, Fedora defaults to doing a suspend on lid close. Since suspend/resume has not been working reliably over time {and I can't afford to lose information}, I turn this off:
system|preferences|system|power management [gnome-power-preferences]
on ac power |actions|when laptop lid is closed=blank screen on battery power|actions|when laptop lid is closed=blank screen
DaveT.
I just wanted to go blank screen; I am using kpowersave and there is no option for action when lid closed=blank screen -- only suspend and shutdown.
I solved the matter by the support of Ubuntu guys -- now, it is working as expected. echo 1 > /proc/acpi/video/C098/DOS
Thanks for the support
-+> Hirantha
-
Development discussions related to Fedora -
hirantha -
Mikkel -
Ric Moore