2:35 p.m.
Hi Everyone,
I have just installed FC5 to replace RH9 and am encountering loads of problems in getting
it set up as my old RH9 system was.
I use it mainly as a web server using PHP and Mysql, I had it networked to my XP machine
using samba and had it set up as a dhcp server. I want to run my internet connection
through it as well for when I expand my network at a later date.
Ok, I have installed FC5 and set up my second drive which contains all my work as
'/home'. I have also installed dhcp and got that working ok but thats where my
problems start.
Although dhcp is allocating ip addresses ok I can not access the server using its name
'linux'. I assume this is due to samba not running.
I need to install samba as the system says it is not installed when I use 'rpm -q
smb', so I downloaded 'samba-common-3.0.22.1.fc5.rpm'. When I go to install
it with 'rpm -ivh samba-common-3.0.22.1.fc5.rpm I get loads of confiction errors.
I have also tried to use the 'Add / Remove software' and 'Software
Updater' from the 'Applications' menu and get an 'Unable to retrive
software infomation' error.
When I try to use yum with the command 'yum install samba-common-3.0.22.1.fc5.rpm'
I get an 'Error: Cannot find a baseurl for repo: core'.
Why am I unable to install samba?
Many thanks,
Garry.
2:51 p.m.
On Thu, 2006-05-25 at 20:35 +0100, Freedom Web Services wrote:
Hi Everyone,
I have just installed FC5 to replace RH9 and am encountering loads of
problems in getting it set up as my old RH9 system was.
I use it mainly as a web server using PHP and Mysql, I had it
networked to my XP machine using samba and had it set up as a dhcp
server. I want to run my internet connection through it as well for
when I expand my network at a later date.
Ok, I have installed FC5 and set up my second drive which contains all
my work as '/home'. I have also installed dhcp and got that working
ok but thats where my problems start.
Although dhcp is allocating ip addresses ok I can not access the
server using its name 'linux'. I assume this is due to samba not
running.
I need to install samba as the system says it is not installed when I
use 'rpm -q smb', so I downloaded 'samba-common-3.0.22.1.fc5.rpm'.
When I go to install it with 'rpm -ivh samba-common-3.0.22.1.fc5.rpm I
get loads of confiction errors.
That's probably because you already have samba installed but have not
configured it to run.
I have also tried to use the 'Add / Remove software' and
'Software
Updater' from the 'Applications' menu and get an 'Unable to retrive
software infomation' error.
When I try to use yum with the command 'yum install
samba-common-3.0.22.1.fc5.rpm' I get an 'Error: Cannot find a baseurl
for repo: core'.
This is probably because you are not connected to the Internet when
trying to use yum or one of the GUI tools built on top of it.
Paul.
3:09 p.m.
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Freedom Web Services wrote:
Although dhcp is allocating ip addresses ok I can not access the
server using its name 'linux'. I assume this is due to samba not
running.
A more general network problem may well be the first cause of your
problems.
I need to install samba as the system says it is not installed when
I use 'rpm -q smb', so I downloaded 'samba-common-3.0.22.1.fc5.rpm'.
When I go to install it with 'rpm -ivh samba-common-3.0.22.1.fc5.rpm
I get loads of confiction errors.
It's much preferable to use yum these days. There's no need to
download the rpm or deal with dependencies manually.
I have also tried to use the 'Add / Remove software' and
'Software
Updater' from the 'Applications' menu and get an 'Unable to retrive
software infomation' error. When I try to use yum with the command
'yum install samba-common-3.0.22.1.fc5.rpm' I get an 'Error: Cannot
find a baseurl for repo: core'.
This looks like you have a more general networking problem on the
system. Have you tried to run 'yum update' yet? I'm guessing you'll
get a similar error about the core repo. If so, you should check
first that your network is working correctly. If it is, then you'll
need to look into the reason yum is not working.
Once yum is working you should be able to run 'yum install samba' (or
Add / Remove Software) to get it installed.
- --
Todd OpenPGP -> KeyID: 0xD654075A | URL: www.pobox.com/~tmz/pgp
======================================================================
Whenever we take away the liberties of those whom we hate we are
opening the way to loss of liberty for those we love.
-- Wendell L. Wilkie
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.3 (GNU/Linux)
Comment: When crypto is outlawed bayl bhgynjf jvyy unir cevinpl.
iG0EARECAC0FAkR2DxImGGh0dHA6Ly93d3cucG9ib3guY29tL350bXovcGdwL3Rt
ei5hc2MACgkQuv+09NZUB1rwoQCg2U6cVcwv/yQRYv0BJs8bJe0i6iMAoOo4uS63
VGDEKe4A4v71WT6hjgCJ
=GS2R
-----END PGP SIGNATURE-----
1:58 p.m.
Freedom Web Services wrote:
> Although dhcp is allocating ip addresses ok I can not access the
> server using its name 'linux'. I assume this is due to samba not
> running.
A more general network problem may well be the first cause of your
problems.
> I need to install samba as the system says it is not installed when
> I use 'rpm -q smb', so I downloaded 'samba-common-3.0.22.1.fc5.rpm'.
> When I go to install it with 'rpm -ivh samba-common-3.0.22.1.fc5.rpm
> I get loads of confiction errors.
It's much preferable to use yum these days. There's no need to
download the rpm or deal with dependencies manually.
> I have also tried to use the 'Add / Remove software' and 'Software
> Updater' from the 'Applications' menu and get an 'Unable to retrive
> software infomation' error. When I try to use yum with the command
> 'yum install samba-common-3.0.22.1.fc5.rpm' I get an 'Error: Cannot
> find a baseurl for repo: core'.
This looks like you have a more general networking problem on the
system. Have you tried to run 'yum update' yet? I'm guessing you'll
get a similar error about the core repo. If so, you should check
first that your network is working correctly. If it is, then you'll
need to look into the reason yum is not working.
Once yum is working you should be able to run 'yum install samba' (or
Add / Remove Software) to get it installed.
My Linux machine is not yet connected to the internet!
I have a BT Voyager 100 ADSL USB modem and connect through AOL on my windoze
box.
I have installed the drivers for this modem, eciadsl, and configured it for
my modem and AOL but I can not get it to work.
I have looked on the net and found that I need a module called n_hdlc in
order to get this to work, the standard FC5 does not have this module. I
understand that I need to recompile my kernel to add it.
I have downloaded the 'kernel-2.6.15.2054_FC5.src.rpm' file and installed
it. As far as I am aware this should have created the relevant
directories/files in '/usr/src' directory but they are not there.
So how do I go about recompiling the kernel to add the module n_hdlc?
Hopefully when I can get the internet working I will be able to run 'yum
update' and be able to install samba through yum.
Many thanks,
Garry.
2:55 a.m.
On Tue, 2006-05-30 at 19:58 +0100, Freedom Web Services wrote:
> Freedom Web Services wrote:
>> Although dhcp is allocating ip addresses ok I can not access the
>> server using its name 'linux'. I assume this is due to samba not
>> running.
>
> A more general network problem may well be the first cause of your
> problems.
>
>> I need to install samba as the system says it is not installed when
>> I use 'rpm -q smb', so I downloaded
'samba-common-3.0.22.1.fc5.rpm'.
>> When I go to install it with 'rpm -ivh samba-common-3.0.22.1.fc5.rpm
>> I get loads of confiction errors.
>
> It's much preferable to use yum these days. There's no need to
> download the rpm or deal with dependencies manually.
>
>> I have also tried to use the 'Add / Remove software' and 'Software
>> Updater' from the 'Applications' menu and get an 'Unable to
retrive
>> software infomation' error. When I try to use yum with the command
>> 'yum install samba-common-3.0.22.1.fc5.rpm' I get an 'Error: Cannot
>> find a baseurl for repo: core'.
>
> This looks like you have a more general networking problem on the
> system. Have you tried to run 'yum update' yet? I'm guessing
you'll
> get a similar error about the core repo. If so, you should check
> first that your network is working correctly. If it is, then you'll
> need to look into the reason yum is not working.
>
> Once yum is working you should be able to run 'yum install samba' (or
> Add / Remove Software) to get it installed.
My Linux machine is not yet connected to the internet!
That's why 'Add / Remove software' and 'Software Updater' from the
'Applications' menu aren't working. They use yum as the backend and
that's configured out of the box to get packages from the Internet.
For a way of using yum and 'Add / Remove software' using the ISO images
used to install the system instead of network repositories, see:
http://www.city-fan.org/tips/YumRepoFromImages
I have a BT Voyager 100 ADSL USB modem and connect through AOL on my
windoze
box.
I have installed the drivers for this modem, eciadsl, and configured it for
my modem and AOL but I can not get it to work.
I have looked on the net and found that I need a module called n_hdlc in
order to get this to work, the standard FC5 does not have this module.
It's in the 2.6.16-1.2122_FC5 kernel though. Try downloading and
installing that update. Much easier than recompiling the kernel
yourself.
Paul.
12:42 p.m.
On Tue, 2006-05-30 at 19:58 +0100, Freedom Web Services wrote:
> > Freedom Web Services wrote:
> >> Although dhcp is allocating ip addresses ok I can not access the
> >> server using its name 'linux'. I assume this is due to samba not
> >> running.
> >
> > A more general network problem may well be the first cause of your
> > problems.
> >
> >> I need to install samba as the system says it is not installed when
> >> I use 'rpm -q smb', so I downloaded
'samba-common-3.0.22.1.fc5.rpm'.
> >> When I go to install it with 'rpm -ivh samba-common-3.0.22.1.fc5.rpm
> >> I get loads of confiction errors.
> >
> > It's much preferable to use yum these days. There's no need to
> > download the rpm or deal with dependencies manually.
> >
> >> I have also tried to use the 'Add / Remove software' and
'Software
> >> Updater' from the 'Applications' menu and get an 'Unable to
retrive
> >> software infomation' error. When I try to use yum with the command
> >> 'yum install samba-common-3.0.22.1.fc5.rpm' I get an 'Error:
Cannot
> >> find a baseurl for repo: core'.
> >
> > This looks like you have a more general networking problem on the
> > system. Have you tried to run 'yum update' yet? I'm guessing
you'll
> > get a similar error about the core repo. If so, you should check
> > first that your network is working correctly. If it is, then you'll
> > need to look into the reason yum is not working.
> >
> > Once yum is working you should be able to run 'yum install samba' (or
> > Add / Remove Software) to get it installed.
>
> My Linux machine is not yet connected to the internet!
That's why 'Add / Remove software' and 'Software Updater' from the
'Applications' menu aren't working. They use yum as the backend and
that's configured out of the box to get packages from the Internet.
For a way of using yum and 'Add / Remove software' using the ISO images
used to install the system instead of network repositories, see:
http://www.city-fan.org/tips/YumRepoFromImages
> I have a BT Voyager 100 ADSL USB modem and connect through AOL on my
> windoze
> box.
> I have installed the drivers for this modem, eciadsl, and configured it
> for
> my modem and AOL but I can not get it to work.
> I have looked on the net and found that I need a module called n_hdlc in
> order to get this to work, the standard FC5 does not have this module.
It's in the 2.6.16-1.2122_FC5 kernel though. Try downloading and
installing that update. Much easier than recompiling the kernel
yourself.
Paul.
Thanks for the help Paul.
I have downloaded and installed the 2.6.16-1.2122_FC5 kernal update but
unfornatunatly this does not solve the problem. The eciadsl-doctor program
still shows that the n_hdlc module is not found, it also reports that I am
using the 2.6.15-1.2054_FC5 kernal, how can this be when I have just
installed the updated kernal with no problems? Am I missing something?
Many Thanks,
Garry.
3:50 p.m.
On Sat, 2006-06-03 at 18:42 +0100, Freedom Web Services wrote:
> On Tue, 2006-05-30 at 19:58 +0100, Freedom Web Services wrote:
>> > Freedom Web Services wrote:
>> >> Although dhcp is allocating ip addresses ok I can not access the
>> >> server using its name 'linux'. I assume this is due to samba
not
>> >> running.
>> >
>> > A more general network problem may well be the first cause of your
>> > problems.
>> >
>> >> I need to install samba as the system says it is not installed when
>> >> I use 'rpm -q smb', so I downloaded
'samba-common-3.0.22.1.fc5.rpm'.
>> >> When I go to install it with 'rpm -ivh
samba-common-3.0.22.1.fc5.rpm
>> >> I get loads of confiction errors.
>> >
>> > It's much preferable to use yum these days. There's no need to
>> > download the rpm or deal with dependencies manually.
>> >
>> >> I have also tried to use the 'Add / Remove software' and
'Software
>> >> Updater' from the 'Applications' menu and get an
'Unable to retrive
>> >> software infomation' error. When I try to use yum with the
command
>> >> 'yum install samba-common-3.0.22.1.fc5.rpm' I get an
'Error: Cannot
>> >> find a baseurl for repo: core'.
>> >
>> > This looks like you have a more general networking problem on the
>> > system. Have you tried to run 'yum update' yet? I'm guessing
you'll
>> > get a similar error about the core repo. If so, you should check
>> > first that your network is working correctly. If it is, then you'll
>> > need to look into the reason yum is not working.
>> >
>> > Once yum is working you should be able to run 'yum install samba'
(or
>> > Add / Remove Software) to get it installed.
>>
>> My Linux machine is not yet connected to the internet!
>
> That's why 'Add / Remove software' and 'Software Updater' from
the
> 'Applications' menu aren't working. They use yum as the backend and
> that's configured out of the box to get packages from the Internet.
>
> For a way of using yum and 'Add / Remove software' using the ISO images
> used to install the system instead of network repositories, see:
> http://www.city-fan.org/tips/YumRepoFromImages
>
>> I have a BT Voyager 100 ADSL USB modem and connect through AOL on my
>> windoze
>> box.
>> I have installed the drivers for this modem, eciadsl, and configured it
>> for
>> my modem and AOL but I can not get it to work.
>> I have looked on the net and found that I need a module called n_hdlc in
>> order to get this to work, the standard FC5 does not have this module.
>
> It's in the 2.6.16-1.2122_FC5 kernel though. Try downloading and
> installing that update. Much easier than recompiling the kernel
> yourself.
>
> Paul.
>
Thanks for the help Paul.
I have downloaded and installed the 2.6.16-1.2122_FC5 kernal update but
unfornatunatly this does not solve the problem. The eciadsl-doctor program
still shows that the n_hdlc module is not found, it also reports that I am
using the 2.6.15-1.2054_FC5 kernal, how can this be when I have just
installed the updated kernal with no problems? Am I missing something?
You won't be using the 2.6.16-1.2122_FC5 kernel until you've rebooted.
Paul,
3:54 p.m.
On Sat, 2006-06-03 at 18:42 +0100, Freedom Web Services wrote:
>
> > On Tue, 2006-05-30 at 19:58 +0100, Freedom Web Services wrote:
> >> > Freedom Web Services wrote:
> >> >> Although dhcp is allocating ip addresses ok I can not access the
> >> >> server using its name 'linux'. I assume this is due to
samba not
> >> >> running.
> >> >
> >> > A more general network problem may well be the first cause of your
> >> > problems.
> >> >
> >> >> I need to install samba as the system says it is not installed
when
> >> >> I use 'rpm -q smb', so I downloaded
> >> >> 'samba-common-3.0.22.1.fc5.rpm'.
> >> >> When I go to install it with 'rpm -ivh
> >> >> samba-common-3.0.22.1.fc5.rpm
> >> >> I get loads of confiction errors.
> >> >
> >> > It's much preferable to use yum these days. There's no need
to
> >> > download the rpm or deal with dependencies manually.
> >> >
> >> >> I have also tried to use the 'Add / Remove software' and
'Software
> >> >> Updater' from the 'Applications' menu and get an
'Unable to retrive
> >> >> software infomation' error. When I try to use yum with the
command
> >> >> 'yum install samba-common-3.0.22.1.fc5.rpm' I get an
'Error: Cannot
> >> >> find a baseurl for repo: core'.
> >> >
> >> > This looks like you have a more general networking problem on the
> >> > system. Have you tried to run 'yum update' yet? I'm
guessing
> >> > you'll
> >> > get a similar error about the core repo. If so, you should check
> >> > first that your network is working correctly. If it is, then
you'll
> >> > need to look into the reason yum is not working.
> >> >
> >> > Once yum is working you should be able to run 'yum install
samba'
> >> > (or
> >> > Add / Remove Software) to get it installed.
> >>
> >> My Linux machine is not yet connected to the internet!
> >
> > That's why 'Add / Remove software' and 'Software Updater'
from the
> > 'Applications' menu aren't working. They use yum as the backend and
> > that's configured out of the box to get packages from the Internet.
> >
> > For a way of using yum and 'Add / Remove software' using the ISO images
> > used to install the system instead of network repositories, see:
> > http://www.city-fan.org/tips/YumRepoFromImages
> >
> >> I have a BT Voyager 100 ADSL USB modem and connect through AOL on my
> >> windoze
> >> box.
> >> I have installed the drivers for this modem, eciadsl, and configured
> >> it
> >> for
> >> my modem and AOL but I can not get it to work.
> >> I have looked on the net and found that I need a module called n_hdlc
> >> in
> >> order to get this to work, the standard FC5 does not have this module.
> >
> > It's in the 2.6.16-1.2122_FC5 kernel though. Try downloading and
> > installing that update. Much easier than recompiling the kernel
> > yourself.
> >
> > Paul.
> >
>
> Thanks for the help Paul.
>
> I have downloaded and installed the 2.6.16-1.2122_FC5 kernal update but
> unfornatunatly this does not solve the problem. The eciadsl-doctor
> program
> still shows that the n_hdlc module is not found, it also reports that I
> am
> using the 2.6.15-1.2054_FC5 kernal, how can this be when I have just
> installed the updated kernal with no problems? Am I missing something?
You won't be using the 2.6.16-1.2122_FC5 kernel until you've rebooted.
Paul,
I have rebooted a couple of times plus the computer was off overnight!
Thanks,
Garry
3:58 p.m.
On Sat, 2006-06-03 at 21:54 +0100, Freedom Web Services wrote:
> On Sat, 2006-06-03 at 18:42 +0100, Freedom Web Services wrote:
>> I have downloaded and installed the 2.6.16-1.2122_FC5 kernal update but
>> unfornatunatly this does not solve the problem. The eciadsl-doctor
>> program
>> still shows that the n_hdlc module is not found, it also reports that I
>> am
>> using the 2.6.15-1.2054_FC5 kernal, how can this be when I have just
>> installed the updated kernal with no problems? Am I missing something?
>
> You won't be using the 2.6.16-1.2122_FC5 kernel until you've rebooted.
>
> Paul,
I have rebooted a couple of times plus the computer was off overnight!
What's the output of:
$ rpm -qa kernel\*
$ uname -a
$ cat /etc/sysconfig/kernel
$ cat /etc/grub.conf
Paul.
4:12 p.m.
----- Original Message -----
From: "Paul Howarth" <paul(a)city-fan.org>
To: "Freedom Web Services" <info(a)freedomwebservices.net>; "For users
of
Fedora Core releases" <fedora-list(a)redhat.com>
Sent: Saturday, June 03, 2006 9:58 PM
Subject: Re: Samba install problem
On Sat, 2006-06-03 at 21:54 +0100, Freedom Web Services wrote:
> > On Sat, 2006-06-03 at 18:42 +0100, Freedom Web Services wrote:
> >> I have downloaded and installed the 2.6.16-1.2122_FC5 kernal update
> >> but
> >> unfornatunatly this does not solve the problem. The eciadsl-doctor
> >> program
> >> still shows that the n_hdlc module is not found, it also reports that
> >> I
> >> am
> >> using the 2.6.15-1.2054_FC5 kernal, how can this be when I have just
> >> installed the updated kernal with no problems? Am I missing
> >> something?
> >
> > You won't be using the 2.6.16-1.2122_FC5 kernel until you've rebooted.
> >
> > Paul,
>
> I have rebooted a couple of times plus the computer was off overnight!
What's the output of:
$ rpm -qa kernel\*
kernel-2.6.15-1.2054_FC5
$ uname -a
Linux linux 2.6.15-1.2054_FC5
$ cat /etc/sysconfig/kernel
UPDATEDEFAULT=yes
DEFAULTKERNEL=kernel
$ cat /etc/grub.conf
default=0
timeout=5
splashimage=(hdo,0)/grub/splash.xpm.gz
hiddenmenu
title fedora Core (2.6.15-1.2054_FC5)
root (hd0,0)
kernel /vmlinux-2.6.15-1.2054_FC5 ro root=/dev/VolGroup00/LogVol00 rhgb
quiet
initrd /initrd-2.6.15-1.2054_FC5.img
By the looks of it the kernel has not been updated, strange as it installed
with no problems!
Many thanks,
Garry.
4:35 a.m.
On Sat, 2006-06-03 at 22:12 +0100, Freedom Web Services wrote:
----- Original Message -----
From: "Paul Howarth" <paul(a)city-fan.org>
To: "Freedom Web Services" <info(a)freedomwebservices.net>; "For users
of
Fedora Core releases" <fedora-list(a)redhat.com>
Sent: Saturday, June 03, 2006 9:58 PM
Subject: Re: Samba install problem
> On Sat, 2006-06-03 at 21:54 +0100, Freedom Web Services wrote:
>> > On Sat, 2006-06-03 at 18:42 +0100, Freedom Web Services wrote:
>> >> I have downloaded and installed the 2.6.16-1.2122_FC5 kernal update
>> >> but
>> >> unfornatunatly this does not solve the problem. The eciadsl-doctor
>> >> program
>> >> still shows that the n_hdlc module is not found, it also reports that
>> >> I
>> >> am
>> >> using the 2.6.15-1.2054_FC5 kernal, how can this be when I have just
>> >> installed the updated kernal with no problems? Am I missing
>> >> something?
>> >
>> > You won't be using the 2.6.16-1.2122_FC5 kernel until you've
rebooted.
>> >
>> > Paul,
>>
>> I have rebooted a couple of times plus the computer was off overnight!
>
> What's the output of:
>
> $ rpm -qa kernel\*
kernel-2.6.15-1.2054_FC5
> $ uname -a
Linux linux 2.6.15-1.2054_FC5
> $ cat /etc/sysconfig/kernel
UPDATEDEFAULT=yes
DEFAULTKERNEL=kernel
> $ cat /etc/grub.conf
default=0
timeout=5
splashimage=(hdo,0)/grub/splash.xpm.gz
hiddenmenu
title fedora Core (2.6.15-1.2054_FC5)
root (hd0,0)
kernel /vmlinux-2.6.15-1.2054_FC5 ro root=/dev/VolGroup00/LogVol00 rhgb
quiet
initrd /initrd-2.6.15-1.2054_FC5.img
By the looks of it the kernel has not been updated, strange as it installed
with no problems!
The only explanation I can think of for this is that you downloaded and
installed the SRPM (.src.rpm) instead of the binary RPM for your
system's architecture (e.g. .i386.rpm or .x86_64.rpm).
Paul.
8:28 a.m.
On Tue, 2006-05-30 at 19:58 +0100, Freedom Web Services wrote:
My Linux machine is not yet connected to the internet!
I have a BT Voyager 100 ADSL USB modem and connect through AOL on my windoze
box.
With that USB modem, it might be easier to have your linux box as the
primary machine to the net, moving the USB modem onto the linux box,
adding a router or hub for a ethernet connection for the Windows machine
to your linux box. I bought a Linksys router for $49 at Wally Mart.
Works very well. No need for samba to do ethernet.
The best setup would be to have a plain ole external DSL modem doing all
the dialup and handshaking, plug the router to it, then plug all your
machines to the router. Linux likes that. Even Network Mangler can
manage that setup quite nicely and you can yum until your butt falls
off. :)
Linux (UNIX) seems to like devices best that are standalone, like
external modems, requiring no system overhead to make them run. If that
USB modem requires Windows drivers to work at all, then it's robbing the
machine of a few cpu cycles and you're also tied to the evil empire
forever, just to talk to the net. -Ric
6535
days inactive
6545
days old
11 comments
4 participants
participants (4)
-
Freedom Web Services -
Paul Howarth -
Ric Moore -
Todd Zullinger