Hi All,
Currently I am facing some issues while adding a node to an engine. Host comes up initially. Then goes to Non-operational state. On trying to activate the host, it again comes up. Then goes to Non-operational state again and so on.
The following message is seen in the engine Events log multiple times - Bridged network ovirtmgmt is attached to multiple interfaces: eth2,eth0 on Host ...
The following is seen in the engine logs - 2013-06-06 20:52:23,003 INFO [org.ovirt.engine.core.vdsbroker.VdsUpdateRunTimeInfo] (DefaultQuartzScheduler_Worker-16) Host '...' moved to Non-Operational state because interface/s 'eth0, ' are down which needed by network/s 'ovirtmgmt, ' in the current cluster
Additional info: The host is a physical machine. The contents of the file /etc/sysconfig/network-scripts/ifcfg-ovirtmgmt -
# cat /etc/sysconfig/network-scripts/ifcfg-ovirtmgmt DEVICE=ovirtmgmt TYPE=Bridge ONBOOT=yes DELAY=0 BOOTPROTO=dhcp NM_CONTROLLED=no
The contents of /etc/sysconfig/network-scripts/ifcfg-eth2
# cat /etc/sysconfig/network-scripts/ifcfg-eth2 DEVICE="eth2" BRIDGE="ovirtmgmt" BOOTPROTO="dhcp" HWADDR="00:25:90:93:62:02" IPV6INIT="yes" IPV6_AUTOCONF="yes" NM_CONTROLLED="yes" ONBOOT="yes" TYPE="Ethernet"
The contents of /etc/sysconfig/network-scripts/ifcfg-eth0 -
# cat /etc/sysconfig/network-scripts/ifcfg-eth0 DEVICE="eth0" HWADDR="00:25:90:7C:2C:7A" NM_CONTROLLED="yes" ONBOOT="yes"
Can someone give some suggestion for this issue!
Thanks and Regards, Tim