vdsm-patches March 2015

vdsm-patches@lists.fedorahosted.org

57 participants
742 discussions

Change in vdsm[master]: api: support multiple 'ipv6addrs' per network and deprecate ...
by osvoboda＠redhat.com 09 Jul '16

09 Jul '16

Ondřej Svoboda has uploaded a new change for review. Change subject: api: support multiple 'ipv6addrs' per network and deprecate 'ipv6addr' ...................................................................... api: support multiple 'ipv6addrs' per network and deprecate 'ipv6addr' Next, the 'ipv6' hook will be extended to understand a whitespace-separated list of IPv6 addresses and also testStaticNetworkConfig will learn to pass multiple IPv6 addresses to VDSM. IPv4 support is planned but needs discussion (should we accept netmasks or just CIDR notation?). Change-Id: I8d16083781919fe5e5d9c75e9dd4ab744afe45be Signed-off-by: Ondřej Svoboda <osvoboda(a)redhat.com> --- M vdsm/network/api.py M vdsm/network/configurators/ifcfg.py M vdsm/network/configurators/iproute2.py M vdsm/network/configurators/pyroute_two.py M vdsm/network/models.py 5 files changed, 45 insertions(+), 24 deletions(-) git pull ssh://gerrit.ovirt.org:29418/vdsm refs/changes/07/39307/1 diff --git a/vdsm/network/api.py b/vdsm/network/api.py index de92fbf..096f89f 100755 --- a/vdsm/network/api.py +++ b/vdsm/network/api.py @@ -82,7 +82,7 @@ def _objectivizeNetwork(bridge=None, vlan=None, bonding=None, bondingOptions=None, nics=None, mtu=None, ipaddr=None, netmask=None, gateway=None, bootproto=None, - ipv6addr=None, ipv6gateway=None, ipv6autoconf=None, + ipv6addrs=None, ipv6gateway=None, ipv6autoconf=None, dhcpv6=None, defaultRoute=None, _netinfo=None, configurator=None, blockingdhcp=None, implicitBonding=None, opts=None): @@ -100,7 +100,7 @@ :param netmask: IPv4 mask in dotted decimal format. :param gateway: IPv4 address in dotted decimal format. :param bootproto: protocol for getting IP config for the net, e.g., 'dhcp' - :param ipv6addr: IPv6 address in format address[/prefixlen]. + :param ipv6addrs: list of IPv6 addresses in the format address[/prefixlen] :param ipv6gateway: IPv6 address in format address[/prefixlen]. :param ipv6autoconf: whether to use IPv6's stateless autoconfiguration. :param dhcpv6: whether to use DHCPv6. @@ -162,7 +162,7 @@ raise ConfigNetworkError(ne.ERR_BAD_PARAMS, 'Network defined without ' 'devices.') ipv4 = IPv4(ipaddr, netmask, gateway, defaultRoute) - ipv6 = IPv6(ipv6addr, ipv6gateway, defaultRoute) + ipv6 = IPv6(ipv6addrs, ipv6gateway, defaultRoute) blockingdhcp = configurator._inRollback or utils.tobool(blockingdhcp) topNetDev.ipconfig = IpConfig( ipv4=ipv4, ipv6=ipv6, bootproto=bootproto, blockingdhcp=blockingdhcp, @@ -249,6 +249,7 @@ @_alterRunningConfig def _addNetwork(network, vlan=None, bonding=None, nics=None, ipaddr=None, netmask=None, prefix=None, mtu=None, gateway=None, dhcpv6=None, + ipv6addrs=None, ipv6addr=None, ipv6gateway=None, ipv6autoconf=None, force=False, configurator=None, bondingOptions=None, bridged=True, _netinfo=None, hostQos=None, @@ -279,6 +280,12 @@ except ValueError as ve: raise ConfigNetworkError(ne.ERR_BAD_ADDR, "Bad prefix: %s" % ve) + if ipv6addr: + if ipv6addrs: + raise ConfigNetworkError(ne.ERR_BAD_PARAMS, + 'Both ipv6addrs and ipv6addr supplied') + else: + ipv6addrs = [ipv6addr] if not utils.tobool(force): logging.debug('validating network...') @@ -312,7 +319,8 @@ bridge=network if bridged else None, vlan=vlan, bonding=bonding, bondingOptions=bondingOptions, nics=nics, mtu=mtu, ipaddr=ipaddr, netmask=netmask, gateway=gateway, bootproto=bootproto, dhcpv6=dhcpv6, - blockingdhcp=blockingdhcp, ipv6addr=ipv6addr, ipv6gateway=ipv6gateway, + blockingdhcp=blockingdhcp, ipv6addrs=ipv6addrs, + ipv6gateway=ipv6gateway, ipv6autoconf=ipv6autoconf, defaultRoute=defaultRoute, _netinfo=_netinfo, configurator=configurator, opts=options) @@ -783,7 +791,8 @@ netmask="<ipv4>" gateway="<ipv4>" bootproto="..." - ipv6addr="<ipv6>[/<prefixlen>]" + ipv6addrs=["<ipv6>[/<prefixlen>]", ...] + ipv6addr="<ipv6>[/<prefixlen>]" (deprecated) ipv6gateway="<ipv6>" ipv6autoconf="0|1" dhcpv6="0|1" diff --git a/vdsm/network/configurators/ifcfg.py b/vdsm/network/configurators/ifcfg.py index 866ade8..f228306 100644 --- a/vdsm/network/configurators/ifcfg.py +++ b/vdsm/network/configurators/ifcfg.py @@ -584,10 +584,13 @@ if ipv4.defaultRoute is not None: cfg += 'DEFROUTE=%s\n' % _to_ifcfg_bool(ipv4.defaultRoute) cfg += 'NM_CONTROLLED=no\n' - if ipv6.address or ipconfig.ipv6autoconf or ipconfig.dhcpv6: + if ipv6.addresses or ipconfig.ipv6autoconf or ipconfig.dhcpv6: cfg += 'IPV6INIT=yes\n' - if ipv6.address is not None: - cfg += 'IPV6ADDR=%s\n' % pipes.quote(ipv6.address) + if ipv6.addresses: + cfg += 'IPV6ADDR=%s\n' % pipes.quote(ipv6.addresses[0]) + if len(ipv6.addresses) > 1: + cfg += 'IPV6ADDR_SECONDARIES=%s\n' % pipes.quote( + ' '.join(ipv6.addresses[1:])) if ipv6.gateway is not None: cfg += 'IPV6_DEFAULTGW=%s\n' % pipes.quote(ipv6.gateway) elif ipconfig.dhcpv6: @@ -701,7 +704,10 @@ if ipv4.defaultRoute is None and confParams.get('DEFROUTE'): ipv4.defaultRoute = _from_ifcfg_bool(confParams['DEFROUTE']) if confParams.get('IPV6INIT') == 'yes': - ipv6.address = confParams.get('IPV6ADDR') + ipv6addr = confParams.get('IPV6ADDR') + ipv6addrs = confParams.get('IPV6ADDR_SECONDARIES') + ipv6.addresses = ([ipv6addr] if ipv6addr else []) + ( + ipv6addrs.split() if ipv6addrs else []) ipv6.gateway = confParams.get('IPV6_DEFAULTGW') ipconfig.ipv6autoconf = ( confParams.get('IPV6_AUTOCONF') == 'yes') diff --git a/vdsm/network/configurators/iproute2.py b/vdsm/network/configurators/iproute2.py index 1cde1cc..045ed66 100644 --- a/vdsm/network/configurators/iproute2.py +++ b/vdsm/network/configurators/iproute2.py @@ -225,16 +225,17 @@ ipconfig = iface.ipconfig ipv4 = ipconfig.ipv4 ipv6 = ipconfig.ipv6 - if ipv4.address or ipv6.address: + if ipv4.address or ipv6.addresses: self.removeIpConfig(iface) if ipv4.address: ipwrapper.addrAdd(iface.name, ipv4.address, ipv4.netmask) if ipv4.gateway and ipv4.defaultRoute: ipwrapper.routeAdd(['default', 'via', ipv4.gateway]) - if ipv6.address: - ipv6addr, ipv6netmask = ipv6.address.split('/') - ipwrapper.addrAdd(iface.name, ipv6addr, ipv6netmask, family=6) + if ipv6.addresses: + for address in ipv6.addresses: + ipv6addr, ipv6netmask = address.split('/') + ipwrapper.addrAdd(iface.name, ipv6addr, ipv6netmask, family=6) if ipv6.gateway: ipwrapper.routeAdd(['default', 'via', ipv6.gateway], dev=iface.name, family=6) diff --git a/vdsm/network/configurators/pyroute_two.py b/vdsm/network/configurators/pyroute_two.py index 221e142..a6833d5 100644 --- a/vdsm/network/configurators/pyroute_two.py +++ b/vdsm/network/configurators/pyroute_two.py @@ -59,7 +59,7 @@ ipconfig = iface.ipconfig ipv4 = ipconfig.ipv4 ipv6 = ipconfig.ipv6 - if ipv4.address or ipv6.address: + if ipv4.address or ipv6.addresses: self.removeIpConfig(iface) if ipv4.address: with self.ip.interfaces[iface.name] as i: @@ -67,9 +67,10 @@ if ipv4.gateway and ipv4.defaultRoute: self.ip.routes.add({'dst': 'default', 'gateway': ipv4.gateway}).commit() - if ipv6.address: + if ipv6.addresses: with self.ip.interfaces[iface.name] as i: - i.add_ip(ipv6.address) + for address in ipv6.addresses: + i.add_ip(address) if ipv6.gateway: self.ip.routes.add({'dst': 'default', 'gateway': ipv6.gateway}).commit() diff --git a/vdsm/network/models.py b/vdsm/network/models.py index 1d34c88..2c577de 100644 --- a/vdsm/network/models.py +++ b/vdsm/network/models.py @@ -410,20 +410,24 @@ class IPv6(object): - def __init__(self, address=None, gateway=None, defaultRoute=None): - if address: - self.validateAddress(address) + def __init__(self, addresses=None, gateway=None, defaultRoute=None): + if addresses: + # TODO: Do we want this? + # if isinstance(addresses, str): + # addresses = addresses.split() + for address in addresses: + self.validateAddress(address) if gateway: self.validateGateway(gateway) elif gateway: raise ConfigNetworkError(ne.ERR_BAD_ADDR, 'Specified gateway but ' 'not ip address.') - self.address = address + self.addresses = addresses self.gateway = gateway self.defaultRoute = defaultRoute def __repr__(self): - return 'IPv6(%s, %s, %s)' % (self.address, self.gateway, + return 'IPv6(%s, %s, %s)' % (self.addresses, self.gateway, self.defaultRoute) @classmethod @@ -465,7 +469,7 @@ if ipv6 is None: ipv6 = IPv6() if (ipv4.address and bootproto == 'dhcp') or \ - (ipv6.address and (ipv6autoconf or dhcpv6)): + (ipv6.addresses and (ipv6autoconf or dhcpv6)): raise ConfigNetworkError(ne.ERR_BAD_ADDR, 'Static and dynamic IP ' 'configurations are mutually exclusive.') self.ipv4 = ipv4 @@ -477,8 +481,8 @@ def __nonzero__(self): # iproute2 and pyroute_two check that IP configuration is not empty - return bool(self.ipv4.address or self.ipv6.address or self.bootproto or - self.ipv6autoconf or self.dhcpv6) + return bool(self.ipv4.address or self.ipv6.addresses or self.bootproto + or self.ipv6autoconf or self.dhcpv6) def __repr__(self): return 'IpConfig(%r, %r, %s, %s, %s)' % (self.ipv4, self.ipv6, -- To view, visit https://gerrit.ovirt.org/39307 To unsubscribe, visit https://gerrit.ovirt.org/settings Gerrit-MessageType: newchange Gerrit-Change-Id: I8d16083781919fe5e5d9c75e9dd4ab744afe45be Gerrit-PatchSet: 1 Gerrit-Project: vdsm Gerrit-Branch: master Gerrit-Owner: Ondřej Svoboda <osvoboda(a)redhat.com>

5 32

Change in vdsm[master]: contrib: Add tool for getting hsm stats
by Nir Soffer 03 Jul '16

03 Jul '16

Nir Soffer has uploaded a new change for review. Change subject: contrib: Add tool for getting hsm stats ...................................................................... contrib: Add tool for getting hsm stats This is a very simple tool showing historgam of hsm calls in the given log files. Example: $ hsmstat vdsm.log.1 vdsm.log.2 8515 getVolumeSize 2258 repoStats 51 getVolumeInfo 30 getVolumesList 19 teardownImage ... We can get same output or better using logdb by writing some smart sql. Change-Id: Ia6013da71ca96535b98edace8577a4d8bb529465 Signed-off-by: Nir Soffer <nsoffer(a)redhat.com> --- A contrib/hsmstat 1 file changed, 39 insertions(+), 0 deletions(-) git pull ssh://gerrit.ovirt.org:29418/vdsm refs/changes/48/38748/1 diff --git a/contrib/hsmstat b/contrib/hsmstat new file mode 100755 index 0000000..d3400d2 --- /dev/null +++ b/contrib/hsmstat @@ -0,0 +1,39 @@ +#!/usr/bin/env python +# +# Copyright 2015 Red Hat, Inc. +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA +# +# Refer to the README and COPYING files for full details of the license +# + +from collections import defaultdict +import fileinput +import re + +verb_re = re.compile(r" Run and protect: (?P<name>.+)\(") + +verbs = defaultdict(int) + +for line in fileinput.input(): + match = verb_re.search(line) + if match: + name = match.group('name') + verbs[name] += 1 + +histogram = sorted(((count, verb) for verb, count in verbs.iteritems()), + reverse=True) +for count, name in histogram: + print " %6d %s" % (count, name) -- To view, visit https://gerrit.ovirt.org/38748 To unsubscribe, visit https://gerrit.ovirt.org/settings Gerrit-MessageType: newchange Gerrit-Change-Id: Ia6013da71ca96535b98edace8577a4d8bb529465 Gerrit-PatchSet: 1 Gerrit-Project: vdsm Gerrit-Branch: master Gerrit-Owner: Nir Soffer <nsoffer(a)redhat.com>

3 8

Change in vdsm[master]: contrib: Add tool for getting repoStats statistics
by Nir Soffer 03 Jul '16

03 Jul '16

Nir Soffer has uploaded a new change for review. Change subject: contrib: Add tool for getting repoStats statistics ...................................................................... contrib: Add tool for getting repoStats statistics This tool is useful when debugging storage domain monitoring issues. Examples: $ repostat vdsm.log.* domain: ebcd25b1-1ab0-47e3-aa8b-83ee5f91b5bd delay avg: 0.093941 min: 0.000430 max: 1.499200 last check avg: 5.117508 min: 0.000000 max: 12.300000 domain: 6d7f7a48-4511-43b8-8abf-d323f7118b19 delay avg: 0.001090 min: 0.000300 max: 0.030056 last check avg: 4.975313 min: 0.000000 max: 10.200000 Change-Id: Id5f7828216058bb401f8a472fa5601e79542def1 Signed-off-by: Nir Soffer <nsoffer(a)redhat.com> --- M Makefile.am A contrib/repostat 2 files changed, 55 insertions(+), 0 deletions(-) git pull ssh://gerrit.ovirt.org:29418/vdsm refs/changes/49/38749/1 diff --git a/Makefile.am b/Makefile.am index 34885a1..7407b22 100644 --- a/Makefile.am +++ b/Makefile.am @@ -49,6 +49,7 @@ autogen.sh \ build-aux/pkg-version \ contrib/profile-stats \ + contrib/repostat \ pylintrc \ vdsm.spec \ vdsm.spec.in \ @@ -80,6 +81,7 @@ WHITELIST = \ contrib/profile-stats \ + contrib/repostat \ init/daemonAdapter \ vdsm/get-conf-item \ vdsm/set-conf-item \ diff --git a/contrib/repostat b/contrib/repostat new file mode 100755 index 0000000..c140b4c --- /dev/null +++ b/contrib/repostat @@ -0,0 +1,53 @@ +#!/usr/bin/env python +# +# Copyright 2015 Red Hat, Inc. +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA +# +# Refer to the README and COPYING files for full details of the license +# +""" +Parse repoStats log lines and calculate statistics. + +Usage: repostat vdsm.log [...] +""" + +import fileinput +import re + +repostat_re = re.compile(r' Run and protect: repoStats, Return response: ') + +stats = {} + + +def liststat(a): + b = sorted(a) + return sum(b) / len(b), b[0], b[-1] + + +for line in fileinput.input(): + match = repostat_re.search(line) + if not match: + continue + response = eval(line[match.end():]) + for uuid, info in response.items(): + stats.setdefault(uuid, {'delays': [], 'checks': []}) + stats[uuid]['delays'].append(float(info['delay'])) + stats[uuid]['checks'].append(float(info['lastCheck'])) + +for uuid, info in stats.iteritems(): + print 'domain:', uuid + print ' delay avg: %f min: %f max: %f' % liststat(info['delays']) + print ' last check avg: %f min: %f max: %f' % liststat(info['checks']) -- To view, visit https://gerrit.ovirt.org/38749 To unsubscribe, visit https://gerrit.ovirt.org/settings Gerrit-MessageType: newchange Gerrit-Change-Id: Id5f7828216058bb401f8a472fa5601e79542def1 Gerrit-PatchSet: 1 Gerrit-Project: vdsm Gerrit-Branch: master Gerrit-Owner: Nir Soffer <nsoffer(a)redhat.com>

3 6

Change in vdsm[master]: tests: Add time per test if nose-timer is available
by asegurap＠redhat.com 02 Jul '16

02 Jul '16

Antoni Segura Puimedon has uploaded a new change for review. Change subject: tests: Add time per test if nose-timer is available ...................................................................... tests: Add time per test if nose-timer is available This patch adds an output like: resourceManagerTests.ResourceManagerTests.testStressTest: 12.8313s resourceManagerTests.ResourceManagerTests.testResourceAcquireTimeout: 1.0069s resourceManagerTests.ResourceManagerTests.testResourceLockSwitch: 0.0108s resourceManagerTests.ResourceManagerTests.testResourceAutorelease: 0.0101s resourceManagerTests.ResourceManagerTests.testResourceInvalidation: 0.0093s resourceManagerTests.ResourceManagerTests.testCrashOnSwitch: 0.0067s resourceManagerTests.ResourceManagerTests.testResourceSwitchLockTypeFail: 0.0062s resourceManagerTests.ResourceManagerTests.testCancelExclusiveBetweenShared: 0.0049s resourceManagerTests.ResourceManagerTests.testAcquireResourceExclusive: 0.0042s resourceManagerTests.ResourceManagerTests.testCancelRequest: 0.0031s resourceManagerTests.ResourceManagerTests.testRequestRefCmp: 0.0030s resourceManagerTests.ResourceManagerTests.testRequestRecancel: 0.0030s resourceManagerTests.ResourceManagerTests.testResourceStatuses: 0.0029s resourceManagerTests.ResourceManagerTests.testAccessAttributeNotExposedByRequestRef: 0.0029s resourceManagerTests.ResourceManagerTests.testFailCreateAfterSwitch: 0.0025s resourceManagerTests.ResourceManagerTests.testRequestWithBadCallbackOnCancel: 0.0025s resourceManagerTests.ResourceManagerTests.testAcquireResourceShared: 0.0023s resourceManagerTests.ResourceManagerTests.testRereleaseResource: 0.0022s resourceManagerTests.ResourceManagerTests.testResourceWrapper: 0.0020s resourceManagerTests.ResourceManagerTests.testRequestWithBadCallbackOnGrant: 0.0020s resourceManagerTests.ResourceManagerTests.testRequestRefStr: 0.0020s resourceManagerTests.ResourceManagerTests.testAccessAttributeNotExposedByWrapper: 0.0019s resourceManagerTests.ResourceManagerTests.testErrorInFactory: 0.0017s resourceManagerTests.ResourceManagerTests.testAcquireNonExistingResource: 0.0016s resourceManagerTests.ResourceManagerTests.testRequestInvalidResource: 0.0015s resourceManagerTests.ResourceManagerTests.testRequestRegrant: 0.0015s resourceManagerTests.ResourceManagerTests.testResourceAcquireInvalidTimeout: 0.0014s resourceManagerTests.ResourceManagerTests.testReleaseInvalidResource: 0.0014s resourceManagerTests.ResourceManagerTests.testSingleton: 0.0014s resourceManagerTests.ResourceManagerTests.testForceRegisterNamespace: 0.0013s resourceManagerTests.ResourceManagerTests.testListNamespaces: 0.0013s resourceManagerTests.ResourceManagerTests.testReregisterNamespace: 0.0012s resourceManagerTests.ResourceManagerTests.testRegisterInvalidNamespace: 0.0012s At the end of the usual tests if nose-timer is detected in the system. It shows the tests over 500ms in yellow and those over 5s in red. If you want to get this output, do: pip install nose-timer Change-Id: I4960b30532a84abd259fb268c7e40a1751847a96 Signed-off-by: Antoni S. Puimedon <asegurap(a)redhat.com> --- M tests/run_tests_local.sh.in M tests/testrunner.py 2 files changed, 18 insertions(+), 1 deletion(-) git pull ssh://gerrit.ovirt.org:29418/vdsm refs/changes/71/30171/1 diff --git a/tests/run_tests_local.sh.in b/tests/run_tests_local.sh.in index d19f22c..f51473d 100644 --- a/tests/run_tests_local.sh.in +++ b/tests/run_tests_local.sh.in @@ -7,4 +7,9 @@ @top_srcdir@/tests/makecert.sh fi -PYTHONDONTWRITEBYTECODE=1 LC_ALL=C PYTHONPATH="@top_srcdir@/lib:@top_srcdir@/vdsm:@top_srcdir@/client:@top_srcdir@/vdsm_api:$PYTHONPATH" "$PYTHON_EXE" @top_srcdir@/tests/testrunner.py --local-modules $@ +python -c 'import nosetimer' > /dev/null 2>&1 +if [ $? -eq 0 ]; then + EXTRA_ARGS='--with-timer' +fi + +PYTHONDONTWRITEBYTECODE=1 LC_ALL=C PYTHONPATH="@top_srcdir@/lib:@top_srcdir@/vdsm:@top_srcdir@/client:@top_srcdir@/vdsm_api:$PYTHONPATH" "$PYTHON_EXE" @top_srcdir@/tests/testrunner.py --local-modules $@ "$EXTRA_ARGS" diff --git a/tests/testrunner.py b/tests/testrunner.py index eed743f..ec24c2b 100644 --- a/tests/testrunner.py +++ b/tests/testrunner.py @@ -40,6 +40,16 @@ from nose import config from nose import core from nose import result +try: + from nosetimer.plugin import TimerPlugin +except ImportError: + timer_plugin = None +else: + timer_plugin = TimerPlugin() + timer_plugin.enabled = True + timer_plugin.timer_ok = 500 # Okay <= 500ms + timer_plugin.timer_warning = 5000 # Warn > 5s + timer_plugin.timer_no_color = False # Enable color output from testValidation import SlowTestsPlugin, StressTestsPlugin @@ -378,6 +388,8 @@ plugins=core.DefaultPluginManager()) conf.plugins.addPlugin(SlowTestsPlugin()) conf.plugins.addPlugin(StressTestsPlugin()) + if timer_plugin is not None: + conf.plugins.addPlugin(timer_plugin) runner = VdsmTestRunner(stream=conf.stream, verbosity=conf.verbosity, -- To view, visit http://gerrit.ovirt.org/30171 To unsubscribe, visit http://gerrit.ovirt.org/settings Gerrit-MessageType: newchange Gerrit-Change-Id: I4960b30532a84abd259fb268c7e40a1751847a96 Gerrit-PatchSet: 1 Gerrit-Project: vdsm Gerrit-Branch: master Gerrit-Owner: Antoni Segura Puimedon <asegurap(a)redhat.com>

6 13

Change in vdsm[master]: tests: Add a live merge functional test
by alitke＠redhat.com 02 Jul '16

02 Jul '16

Adam Litke has uploaded a new change for review. Change subject: tests: Add a live merge functional test ...................................................................... tests: Add a live merge functional test Test whether we can successfully merge the active layer. Uses lots of the functional test infrastructure! Only runs if vdsm says it can support live merge. Change-Id: Idd5a2f7eedaef9e90981256de66fc3ed21658e89 Signed-off-by: Adam Litke <alitke(a)redhat.com> --- M tests/functional/utils.py M tests/functional/virtTests.py 2 files changed, 185 insertions(+), 5 deletions(-) git pull ssh://gerrit.ovirt.org:29418/vdsm refs/changes/24/29824/1 diff --git a/tests/functional/utils.py b/tests/functional/utils.py index 494be98..e3cdba6 100644 --- a/tests/functional/utils.py +++ b/tests/functional/utils.py @@ -228,3 +228,41 @@ def updateVmPolicy(self, vmId, vcpuLimit): result = self.vdscli.updateVmPolicy([vmId, vcpuLimit]) return result['status']['code'], result['status']['message'] + + def getTaskStatus(self, taskId): + result = self.vdscli.getTaskStatus(taskId) + return result['status']['code'], result['status']['message'],\ + result['taskStatus'] + + def getVolumeInfo(self, sdId, spId, imgId, volId): + result = self.vdscli.getVolumeInfo(sdId, spId, imgId, volId) + return result['status']['code'], result['status']['message'],\ + result['info'] + + def createVolume(self, sdId, spId, imgId, size, volFormat, preallocate, + diskType, volId, desc, baseImgId, baseVolId): + result = self.vdscli.createVolume(sdId, spId, imgId, size, volFormat, + preallocate, diskType, volId, desc, + baseImgId, baseVolId) + return result['status']['code'], result['status']['message'],\ + result['uuid'] + + def deleteVolume(self, sdId, spId, imgId, volIds, postZero=False, + force=False): + result = self.vdscli.deleteVolume(sdId, spId, imgId, volIds, postZero, + force) + return result['status']['code'], result['status']['message'],\ + result['uuid'] + + def snapshot(self, vmId, snapDrives, snapMemVolHandle=''): + result = self.vdscli.snapshot(vmId, snapDrives, snapMemVolHandle) + return result['status']['code'], result['status']['message'] + + def merge(self, vmId, drive, base, top, bandwidth, jobId): + result = self.vdscli.merge(vmId, drive, base, top, bandwidth, jobId) + return result['status']['code'], result['status']['message'] + + def list(self, fullStatus=False, vmList=()): + result = self.vdscli.list(fullStatus, vmList) + return result['status']['code'], result['status']['message'], \ + result['vmList'] diff --git a/tests/functional/virtTests.py b/tests/functional/virtTests.py index 94ce240..b811b92 100644 --- a/tests/functional/virtTests.py +++ b/tests/functional/virtTests.py @@ -22,6 +22,7 @@ import math import tempfile import logging +import uuid from stat import S_IROTH from functools import partial, wraps @@ -32,7 +33,8 @@ from testrunner import temporaryPath from vdsm.utils import CommandPath, RollbackContext -import storageTests as storage +import storageTests +import storage from storage.misc import execCmd from utils import VdsProxy, SUCCESS @@ -109,6 +111,18 @@ return method(self, *args, **kwargs) else: raise SkipTest('KVM is not enabled') + return wrapped + + +def requireLiveMerge(method): + @wraps(method) + def wrapped(self, *args, **kwargs): + status, msg, result = self.vdsm.getVdsCapabilities() + self.assertEqual(status, SUCCESS, msg) + if result.get('liveMerge') == 'true': + return method(self, *args, **kwargs) + else: + raise SkipTest('Live Merge is not available') return wrapped @@ -227,9 +241,9 @@ @requireKVM @permutations([['localfs'], ['iscsi'], ['nfs']]) def testVmWithStorage(self, backendType): - disk = storage.StorageTest() + disk = storageTests.StorageTest() disk.setUp() - conf = storage.storageLayouts[backendType] + conf = storageTests.storageLayouts[backendType] drives = disk.generateDriveConf(conf) customization = {'vmId': '88888888-eeee-ffff-aaaa-111111111111', 'vmName': 'testVmWithStorage' + backendType, @@ -247,8 +261,8 @@ def testVmWithDevice(self, *devices): customization = {'vmId': '77777777-ffff-3333-bbbb-222222222222', 'vmName': 'testVm', 'devices': [], 'display': 'vnc'} - storageLayout = storage.storageLayouts['localfs'] - diskSpecs = storage.StorageTest.generateDriveConf(storageLayout) + storageLayout = storageTests.storageLayouts['localfs'] + diskSpecs = storageTests.StorageTest.generateDriveConf(storageLayout) pciSpecs = {'bus': '0x00', 'domain': '0x0000', 'function': '0x0', 'type': 'pci'} ccidSpecs = {'slot': '0', 'controller': '0', 'type': 'ccid'} @@ -412,3 +426,131 @@ self.vdsm.updateVmPolicy(customization['vmId'], '50') self.assertEqual(status, SUCCESS, msg) + + +@expandPermutations +class LiveMergeTest(VirtTestBase): + def _waitTask(self, taskId): + def assertTaskOK(): + status, msg, result = self.vdsm.getTaskStatus(taskId) + self.assertEqual(status, SUCCESS, msg) + self.assertEquals(result['taskState'], 'finished') + + self.retryAssert(assertTaskOK, timeout=60) + + def _waitBlockJobs(self, vmId, jobIds): + def assertJobsGone(): + status, msg, result = self.vdsm.getVmStats(vmId) + self.assertEqual(status, SUCCESS, msg) + self.assertTrue('vmJobs' in result) + self.assertTrue(all([x not in result['vmJobs'].keys() + for x in jobIds])) + + self.retryAssert(assertJobsGone, timeout=60) + + def _snapshotVM(self, vmId, drives, rollback): + snapDrives = [] + for drive in drives: + sd = drive['domainID'] + sp = drive['poolID'] + img = drive['imageID'] + vol = drive['volumeID'] + newVol = str(uuid.uuid4()) + volFormat = storage.volume.COW_FORMAT + preallocate = storage.volume.SPARSE_VOL + desc = 'snapshot for %s' % vol + + # Create volume and wait + status, msg, result = self.vdsm.getVolumeInfo(sd, sp, img, vol) + self.assertEqual(status, SUCCESS, msg) + size = result['capacity'] + diskType = result['disktype'] + + status, msg, taskId = self.vdsm.createVolume(sd, sp, img, size, + volFormat, + preallocate, diskType, + newVol, desc, img, + vol) + self.assertEqual(status, SUCCESS, msg) + self._waitTask(taskId) + undo = lambda sd=sd, sp=sp, img=img, vol=newVol: \ + self._waitTask(self.vdsm.deleteVolume(sd, sp, img, vol)[2]) + rollback.prependDefer(undo) + + snapDrives.append({'domainID': sd, + 'imageID': img, + 'volumeID': newVol, + 'baseVolumeID': vol}) + + # Create snapshot + status, msg = self.vdsm.snapshot(vmId, snapDrives) + self.assertEqual(status, SUCCESS, msg) + return snapDrives + + def _orderChain(self, vmId, dev, chain): + parentMap = {} + for vol in chain: + status, msg, info = self.vdsm.getVolumeInfo(dev['domainID'], + dev['poolID'], + dev['imageID'], vol) + self.assertEqual(status, SUCCESS, msg) + parent = info['parent'] + parentMap[vol] = parent + + vol = dev['volumeID'] + chain = list() + while True: + chain.insert(0, vol) + vol = parentMap.get(vol, '00000000-0000-0000-0000-000000000000') + if vol == '00000000-0000-0000-0000-000000000000': + break + return chain + + def _getVolumeChains(self, vmId): + chains = {} + status, msg, result = self.vdsm.list(True, (vmId,)) + self.assertEqual(status, SUCCESS, msg) + vmDef = result[0] + for dev in vmDef['devices']: + if dev['device'] != 'disk': + continue + chains[dev['imageID']] = self._orderChain(vmId, dev, + [x['volumeID'] for x in + dev['volumeChain']]) + return chains + + @requireKVM + @requireLiveMerge + def testCapable(self): + pass + + @permutations([['localfs']]) + def testMergeActiveLayer(self, backendType): + disk = storageTests.StorageTest() + disk.setUp() + conf = storageTests.storageLayouts[backendType] + drives = disk.generateDriveConf(conf) + vmId = '12121212-abab-baba-abab-222222222222' + customization = {'vmId': vmId, + 'vmName': 'testMergeActive' + backendType, + 'drives': drives, + 'display': 'vnc'} + + with RollbackContext() as rollback: + disk.createVdsmStorageLayout(conf, 3, rollback) + with RunningVm(self.vdsm, customization) as vm: + self._waitForStartup(vm, VM_MINIMAL_UPTIME) + snapDrives = self._snapshotVM(vmId, drives, rollback) + chains = {} + jobIds = [] + for drive in snapDrives: + base = drive['baseVolumeID'] + top = drive['volumeID'] + jobId = str(uuid.uuid4()) + chains[drive['imageID']] = [base, top] + status, msg = self.vdsm.merge(vmId, drive, base, top, 0, + jobId) + jobIds.append(jobId) + self._waitBlockJobs(vmId, jobIds) + actual = self._getVolumeChains(vmId) + self.assertEquals(chains, actual) -- To view, visit http://gerrit.ovirt.org/29824 To unsubscribe, visit http://gerrit.ovirt.org/settings Gerrit-MessageType: newchange Gerrit-Change-Id: Idd5a2f7eedaef9e90981256de66fc3ed21658e89 Gerrit-PatchSet: 1 Gerrit-Project: vdsm Gerrit-Branch: master Gerrit-Owner: Adam Litke <alitke(a)redhat.com>

5 13

Change in vdsm[master]: ipv6 hook: support ipv6addrs
by osvoboda＠redhat.com 02 Jul '16

02 Jul '16

Ondřej Svoboda has uploaded a new change for review. Change subject: ipv6 hook: support ipv6addrs ...................................................................... ipv6 hook: support ipv6addrs Change-Id: I722d0007840060cdccdb12e4fba2a2066f33c62f Signed-off-by: Ondřej Svoboda <osvoboda(a)redhat.com> --- M vdsm_hooks/ipv6/README M vdsm_hooks/ipv6/ipv6.py 2 files changed, 12 insertions(+), 5 deletions(-) git pull ssh://gerrit.ovirt.org:29418/vdsm refs/changes/59/39359/1 diff --git a/vdsm_hooks/ipv6/README b/vdsm_hooks/ipv6/README index 05bd990..a96e2c2 100644 --- a/vdsm_hooks/ipv6/README +++ b/vdsm_hooks/ipv6/README @@ -5,13 +5,18 @@ Requirements: * oVirt-3.5 (started supporting custom properties) +New in version 4.18: (?) +-------------------- +Multiple IPv6 addresses are now accepted, see Usage. Please use 'ipv6addrs' +property instead of 'ipv6addr' which is deprecated. + Preparation on a host: ---------------------- yum install vdsm-hook-ipv6 Preparation on the engine side: ------------------------------- -PROPERTIES='ipv6addr=.*;ipv6gateway=.*;ipv6autoconf=.*;dhcpv6=.*' +PROPERTIES='ipv6addrs=.*;ipv6gateway=.*;ipv6autoconf=.*;dhcpv6=.*' engine-config -s "UserDefinedNetworkCustomProperties=$PROPERTIES" --cver='3.5' Don't forget to include the names of other custom network properties you may @@ -20,9 +25,10 @@ Usage: ------ In the oVirt UI open the 'Setup Host Networks' dialog. Proceed to editing -a desired logical network's properties. Among them you will find 'ipv6addr' -and 'ipv6gateway', which accept custom IPv6 addresses, plus 'ipv6autoconf' -and 'dhcpv6', which accept '0', '1' or 'false', 'true'. +a desired logical network's properties. Among them you will find 'ipv6addrs' +(which accepts a space-separated list of IPv6 addresses), 'ipv6gateway' +(a single address), plus 'ipv6autoconf' and 'dhcpv6', which accept '0', '1' or +'false', 'true'. You may be warned that the network is in use when confirming the 'Setup Host Networks' dialog. Make sure to stop any VMs that are using the network. diff --git a/vdsm_hooks/ipv6/ipv6.py b/vdsm_hooks/ipv6/ipv6.py index 6c00475..9385fab 100644 --- a/vdsm_hooks/ipv6/ipv6.py +++ b/vdsm_hooks/ipv6/ipv6.py @@ -34,7 +34,8 @@ def _process_network(attrs): - for property_name in ('ipv6addr', 'ipv6gateway', 'ipv6autoconf', 'dhcpv6'): + for property_name in ('ipv6addrs', 'ipv6addr', 'ipv6gateway', + 'ipv6autoconf', 'dhcpv6'): value = attrs['custom'].get(property_name) if value is not None: attrs[property_name] = value -- To view, visit https://gerrit.ovirt.org/39359 To unsubscribe, visit https://gerrit.ovirt.org/settings Gerrit-MessageType: newchange Gerrit-Change-Id: I722d0007840060cdccdb12e4fba2a2066f33c62f Gerrit-PatchSet: 1 Gerrit-Project: vdsm Gerrit-Branch: master Gerrit-Owner: Ondřej Svoboda <osvoboda(a)redhat.com>

5 20

Change in vdsm[master]: api: allow setLogLevel to tune a specific logger
by fromani＠redhat.com 28 Jun '16

28 Jun '16

Francesco Romani has uploaded a new change for review. Change subject: api: allow setLogLevel to tune a specific logger ...................................................................... api: allow setLogLevel to tune a specific logger the not widely known setLogLevel VDSM verb allows to dinamically tune the log level of the root logger, until the next restart of VDSM. This patch extends the API to let the client tune any specific logger. Change-Id: I8f40488fac04031552f36b9de026a0062ab81db0 Signed-off-by: Francesco Romani <fromani(a)redhat.com> --- M vdsm/API.py M vdsm/rpc/BindingXMLRPC.py M vdsm/rpc/vdsmapi-schema.json 3 files changed, 12 insertions(+), 6 deletions(-) git pull ssh://gerrit.ovirt.org:29418/vdsm refs/changes/26/38426/1 diff --git a/vdsm/API.py b/vdsm/API.py index 85478b1..593f336 100644 --- a/vdsm/API.py +++ b/vdsm/API.py @@ -1360,7 +1360,7 @@ return {'status': doneCode, 'info': stats} - def setLogLevel(self, level): + def setLogLevel(self, level, name=None): """ Set verbosity level of vdsm's log. @@ -1382,8 +1382,10 @@ except KeyError: return errCode['unavail'] else: - logging.info('Setting loglevel to %s (%d)', level, log_level) - _set_log_level(logging.getLogger(), log_level) + logger = logging.getLogger(name) + logging.info('Setting loglevel on %s to %s (%d)', + logger.name, level, log_level) + _set_log_level(logger, log_level) return {'status': doneCode} # VM-related functions diff --git a/vdsm/rpc/BindingXMLRPC.py b/vdsm/rpc/BindingXMLRPC.py index b01b661..ea0e0c3 100644 --- a/vdsm/rpc/BindingXMLRPC.py +++ b/vdsm/rpc/BindingXMLRPC.py @@ -583,9 +583,9 @@ return api.fenceNode(addr, port, agent, username, password, action, secure, options, policy) - def setLogLevel(self, level): + def setLogLevel(self, level, name=None): api = API.Global() - return api.setLogLevel(level) + return api.setLogLevel(level, name) def setMOMPolicy(self, policy): api = API.Global() diff --git a/vdsm/rpc/vdsmapi-schema.json b/vdsm/rpc/vdsmapi-schema.json index 1d919e8..854e7aa 100644 --- a/vdsm/rpc/vdsmapi-schema.json +++ b/vdsm/rpc/vdsmapi-schema.json @@ -4030,10 +4030,14 @@ # # @level: The new verosity level desired # +# @name: #optional If present, change settings only for the logger +# with this name. Otherwise, change settings for the top-level +# logger (new in version 4.17.0). +# # Since: 4.10.0 ## {'command': {'class': 'Host', 'name': 'setLogLevel'}, - 'data': {'level': 'LoggingLevel'}} + 'data': {'level': 'LoggingLevel', '*name': 'str'}} ## # @Host.setSafeNetworkConfig: -- To view, visit https://gerrit.ovirt.org/38426 To unsubscribe, visit https://gerrit.ovirt.org/settings Gerrit-MessageType: newchange Gerrit-Change-Id: I8f40488fac04031552f36b9de026a0062ab81db0 Gerrit-PatchSet: 1 Gerrit-Project: vdsm Gerrit-Branch: master Gerrit-Owner: Francesco Romani <fromani(a)redhat.com>

6 36

Change in vdsm[master]: API: streamline and make setLogLevel correct
by fromani＠redhat.com 28 Jun '16

28 Jun '16

Francesco Romani has uploaded a new change for review. Change subject: API: streamline and make setLogLevel correct ...................................................................... API: streamline and make setLogLevel correct According to the schema, setLogLevel should accept a log level string ('DEBUG', 'INFO',...). But the code actually blindly casted the given value to int(), and this suggests the code actually expected an integer value. To make things a bit user friendlier and comformant to schema, change the argument to actually be a log level in string format. Along the way, this patch streamlines the implementation of setLogLevel and makes it simpler. Change-Id: Iaddbb12d13bdbaa7a02255ab209da11e42d2ea97 Signed-off-by: Francesco Romani <fromani(a)redhat.com> --- M vdsm/API.py 1 file changed, 21 insertions(+), 6 deletions(-) git pull ssh://gerrit.ovirt.org:29418/vdsm refs/changes/25/38425/1 diff --git a/vdsm/API.py b/vdsm/API.py index 5cbda50..85478b1 100644 --- a/vdsm/API.py +++ b/vdsm/API.py @@ -1369,13 +1369,22 @@ Doesn't survive a restart """ - logging.info('Setting loglevel to %s', level) - handlers = logging.getLogger().handlers - [fileHandler] = [h for h in handlers if - isinstance(h, logging.FileHandler)] - fileHandler.setLevel(int(level)) + LEVELS = { + 'DEBUG': logging.DEBUG, + 'INFO': logging.INFO, + 'WARNING': logging.WARNING, + 'ERROR': logging.ERROR, + 'CRITICAL': logging.CRITICAL + } - return {'status': doneCode} + try: + log_level = LEVELS[level] + except KeyError: + return errCode['unavail'] + else: + logging.info('Setting loglevel to %s (%d)', level, log_level) + _set_log_level(logging.getLogger(), log_level) + return {'status': doneCode} # VM-related functions def getVMList(self, fullStatus=False, vmList=()): @@ -1772,3 +1781,9 @@ logging.warn("options %s is deprecated. Use %s instead" % (k, _translationMap[k])) options[_translationMap[k]] = options.pop(k) + + +def _set_log_level(logger, log_level): + for handler in logger.handlers: + if isinstance(handler, logging.FileHandler): + handler.setLevel(log_level) -- To view, visit https://gerrit.ovirt.org/38425 To unsubscribe, visit https://gerrit.ovirt.org/settings Gerrit-MessageType: newchange Gerrit-Change-Id: Iaddbb12d13bdbaa7a02255ab209da11e42d2ea97 Gerrit-PatchSet: 1 Gerrit-Project: vdsm Gerrit-Branch: master Gerrit-Owner: Francesco Romani <fromani(a)redhat.com>

6 38

Change in vdsm[master]: block: add blkdiscard on zero image
by Federico Simoncelli 15 Nov '15

15 Nov '15

Federico Simoncelli has uploaded a new change for review. Change subject: block: add blkdiscard on zero image ...................................................................... block: add blkdiscard on zero image Change-Id: I4e059c556c550440727b36b8af8e5dfc29ce2ccb Signed-off-by: Federico Simoncelli <fsimonce(a)redhat.com> --- M vdsm/storage/blockSD.py 1 file changed, 2 insertions(+), 0 deletions(-) git pull ssh://gerrit.ovirt.org:29418/vdsm refs/changes/31/35631/1 diff --git a/vdsm/storage/blockSD.py b/vdsm/storage/blockSD.py index daaa94f..a2370b8 100644 --- a/vdsm/storage/blockSD.py +++ b/vdsm/storage/blockSD.py @@ -33,6 +33,7 @@ from vdsm.config import config from vdsm import constants from vdsm import utils +from vdsm import utillinux import misc import fileUtils import sd @@ -219,6 +220,7 @@ try: misc.ddWatchCopy("/dev/zero", path, aborting, size) + utillinux.blkdiscard(path) except Exception as e: log.exception('zeroing operation failed') raise se.VolumesZeroingError(path) -- To view, visit http://gerrit.ovirt.org/35631 To unsubscribe, visit http://gerrit.ovirt.org/settings Gerrit-MessageType: newchange Gerrit-Change-Id: I4e059c556c550440727b36b8af8e5dfc29ce2ccb Gerrit-PatchSet: 1 Gerrit-Project: vdsm Gerrit-Branch: master Gerrit-Owner: Federico Simoncelli <fsimonce(a)redhat.com>

6 10

Change in vdsm[master]: lvm: Exclude faulty devices from lvm long filter
by Nir Soffer 15 Nov '15

15 Nov '15

Nir Soffer has uploaded a new change for review. Change subject: lvm: Exclude faulty devices from lvm long filter ...................................................................... lvm: Exclude faulty devices from lvm long filter lvm commands use filter to limit access to relevant devices. When the filter includes a faulty device, lvm commands may block for several minutes (stuck in D state). We have seen getDevicesList command stuck for up to 10 minutes because of faulty devices in the long filter. We used to build the filter from all multipath devices. Now we build the filter only from devices which have at least one active paths. # multipath -ll 360060160f4a0300038ed7058b5e9e311 dm-0 DGC ,VRAID size=15G features='0' hwhandler='1 emc' wp=rw |-+- policy='service-time 0' prio=0 status=enabled | `- 4:0:3:0 sdd 8:48 failed faulty running `-+- policy='service-time 0' prio=0 status=enabled `- 4:0:2:0 sdb 8:16 failed faulty running 360060160f4a030003268ab211002e411 dm-1 DGC ,VRAID size=30G features='1 queue_if_no_path' hwhandler='1 emc' wp=rw |-+- policy='service-time 0' prio=4 status=active | `- 4:0:3:1 sde 8:64 active ready running `-+- policy='service-time 0' prio=1 status=enabled `- 4:0:2:1 sdc 8:32 active ready running Previously, both devices were included in the filter, now only 360060160f4a030003268ab211002e411 will be included in lvm filter. A faulty device which became active again will be included in lvm filter after the next refresh (every 5 minutes), or after trying edit or create a new storage domain. lvm uses also short filter, including devices used by the certain vg or lv. It is possible that we also have to exclude such devices from the short filter. This will be handled later if needed. Change-Id: I6d7a973bcefa95813fdc289847760c0955aca30c Bug-Url: https://bugzilla.redhat.com/880738 Signed-off-by: Nir Soffer <nsoffer(a)redhat.com> --- M vdsm/storage/lvm.py M vdsm/storage/multipath.py 2 files changed, 13 insertions(+), 1 deletion(-) git pull ssh://gerrit.ovirt.org:29418/vdsm refs/changes/75/31875/1 diff --git a/vdsm/storage/lvm.py b/vdsm/storage/lvm.py index 86edf55..9cfad01 100644 --- a/vdsm/storage/lvm.py +++ b/vdsm/storage/lvm.py @@ -244,7 +244,7 @@ if not self._filterStale: return self._extraCfg - self._extraCfg = _buildConfig(multipath.getMPDevNamesIter()) + self._extraCfg = _buildConfig(multipath.getActiveMPDevNamesIter()) _updateLvmConf(self._extraCfg) self._filterStale = False diff --git a/vdsm/storage/multipath.py b/vdsm/storage/multipath.py index ba98866..2b30995 100644 --- a/vdsm/storage/multipath.py +++ b/vdsm/storage/multipath.py @@ -382,6 +382,18 @@ yield os.path.join(devicemapper.DMPATH_PREFIX, name) +def getActiveMPDevNamesIter(): + status = devicemapper.getPathsStatus() + for dmId, guid in getMPDevsIter(): + active = [slave for slave in devicemapper.getSlaves(dmId) + if status.get(slave) == "active"] + if not active: + log.warning("Skipping device %s - no active slave", guid) + continue + log.debug("Found device %s %s", guid, active) + yield os.path.join(devicemapper.DMPATH_PREFIX, guid) + + def getMPDevsIter(): """ Collect the list of all the multipath block devices. -- To view, visit http://gerrit.ovirt.org/31875 To unsubscribe, visit http://gerrit.ovirt.org/settings Gerrit-MessageType: newchange Gerrit-Change-Id: I6d7a973bcefa95813fdc289847760c0955aca30c Gerrit-PatchSet: 1 Gerrit-Project: vdsm Gerrit-Branch: master Gerrit-Owner: Nir Soffer <nsoffer(a)redhat.com>

5 18

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

vdsm-patches March 2015