initscripts, xen and bonding
by Axel Thimm
Hi,
I'm having a hard time getting bonding to work on FC5t3. It looks like
the bond0 interface bond0 is renamed to pbond0 by xen [*] and the
enslaving does not work anymore then. It works if I log on the
terminal and ifenslave the devices to pbond0 instead of bond0 after
the boot process has finished.
But I want this to be handled automatically during reboots, so I tried
assigning the bonding slaves to pbond0 as a master in the
ifcfg-eth{0,1} scripts, but that doesn't work.
What is causing the bond0 rename and should this renaming be
considered by initscript? Is this a user error or should I file this
against bugzilla? xen or initscripts?
Thanks!
[*] The only reference I found was a Japanese site and google's
translation of it.
http://translate.google.com/translate?hl=en&sl=ja&u=http://hoop.euqset.or...
--
Axel.Thimm at ATrpms.net
17 years, 1 month
Simple testing results for Xen and VMX on FC5-test2.
by You, Yongkang
Hi all,
I have done a simple checking for Xen and VMX on FC5-test2. Basically, I can create VMX on FC5-test2 IA32. But FC5-test2 IA32e (x86-64) doesn't provide Xen and Xen0 kernel, so didn't do Xen and VMX testing for it.
Beside of testing Xen and VMX, I also found some issues about installation, which I have updated the bug #179078 as a NB. The following is the testing results only for Xen and VMX.
=========================
1. *** IA32E hasn't RPMS about Xen hypervisor and Xen0/XenU kernels. __FAIL__
2. *** In order to boot up IA32 Xen0, I have to add pci=noacpi as the boot
parameters of Xen0 kernel, or system will hang when initial PCI. I don't know if it is only related to my Machine. __FAIL__
3. After install IA32 Xen RPMs, I can see /boot/grub/grub.conf has been changed
with Xen kernels. __PASS__
4. *** /usr/lib/xen/boot/vmxloader isn't in the RPM package, so VMX Guest
couldn't be created. I suspected build system hasn't bcc, it is from DEV86
package. __FAIL__
5. After copy a useable vmxloader to the destination, IA32 VMX Guest can be
created successfully! __PASS__
6. VMX has good network connection and Xwindows started. __PASS__
7. XenU can be created and works well. __PASS__
8. Couldn't get Xen Changeset by "xm info" or "xm dmesg".
9. The new kernel names of Xen/Xen0/XenU seemed a little confused. E.g. the Xen0 name is like vmlinuz-2.6.15-1.29_FC5hypervisor. I thought hypervisor is for Xen.gz. Xen0 is the Service OS.
==========================
Any comments please let me know. But I will have 8 days holiday from tomorrow, so emails reply might be slow and occasional.
[FYI] We are planning to do more testing for FC5-test3.
Best Regards,
Yongkang (Kangkang) 永康
17 years, 3 months
Console Hang On Boot Using 2.6.18-1.2200.fc5xenU
by Stan Larson
Sorry if this is a repeat. I haven't found searchable archives for this
forum yet.
1. I installed FC5 + xen on a base system and performed "yum -y upgrade".
2. I then created and booted a DomU using the original FC5 disk. So
far, so good.
3. In the DomU, I performed "yum -y upgrade" and rebooted the DomU
using the new kernel, 2.6.18-1.2200.fc5xenU.
The DomU boots OK, but returns control or starts a shell. The console
starts all services and then just hangs. I can ssh into the domain
from another window and all is well. If I break from the console using
CRTL-] and then return using xm console, I'm still stuck. If I boot to
the old kernel (the one provided by the FC5 install disk, aka
2.6.15-1.2054_FC5xenU) the problem doesn't occur.
Any suggestions?
--
Stan Larson
I/S Manager
Freedom Sales & Marketing
P: (727) 835-1150
F: (727) 835-1151
stan(a)freedomics.com
www.freedomics.com
17 years, 5 months
FC5 updated Xen RPMs in updates-testing
by Daniel P. Berrange
Hi Folks,
After working through the many many BZ tickets & mailing list threads on
the subject of broken FC5 kernel-xen / xen recently, I've finally got new
packages available in updates-testing for wider testing. Design to work
against the latest 2.6.18-1.2200.fc5 kernels is:
xen-3.0.3-1.fc5 (fixes the xen userland in general)
kudzu-1.2.34.5-1 (ensure that agetty is started on xen serial console)
The two related update notices are on fedora-test-list:
http://www.redhat.com/archives/fedora-test-list/2006-October/msg01060.html
http://www.redhat.com/archives/fedora-test-list/2006-October/msg01056.html
Note, with these updates you can now use the full graphical framebuffer
in para-virt guests too. Just add 'vnc=1' in the guest config. As with FC6
it listens on 127.0.0.1 by default, which can be changed with a config
param vnclisten=0.0.0.0, although if doing that its wise to also add
the vncpassword='XYZ' parameter too. The 'vncunused=1' parameter will make
it auto-pick the first unused VNC display, rather than hardcoding the
port to be 5900+domid.
Regards,
Dan.
--
|=- Red Hat, Engineering, Emerging Technologies, Boston. +1 978 392 2496 -=|
|=- Perl modules: http://search.cpan.org/~danberr/ -=|
|=- Projects: http://freshmeat.net/~danielpb/ -=|
|=- GnuPG: 7D3B9505 F3C9 553F A1DA 4AC2 5648 23C1 B3DF F742 7D3B 9505 -=|
17 years, 5 months
kernel-xen0-2.6.18-1.2200.fc5 amusingly unhappy
by Matt Bernstein
[root@hyperion ~]# cat /proc/version
Linux version 2.6.18-1.2200.fc5xen0 (brewbuilder(a)hs20-bc2-3.build.redhat.com) (gcc version 4.1.1 20060525 (Red Hat 4.1.1-1)) #1 SMP Sat Oct 14 17:49:47 EDT 2006
[root@hyperion ~]# getenforce
Permissive
[root@hyperion ~]# xm list
Error: Error connecting to xend: No such file or directory. Is xend running?
[root@hyperion ~]# /etc/init.d/xend status
xend is running
Reverting to 2.6.17-1.2157_FC5xen0 fixes this problem.
17 years, 5 months
RE: [Fedora-xen] does fully virtualized work?
by Ranganathan, Shobha
Did you try xm create "domain_name" ?
I have FC5 unmodified guest running in host FC6 Test2 ..
Regards
Shobha Ranganathan
"The significant challenges we face cannot be resolved at the same level
of thinking we were at when we created them." Albert Einstein
-----Original Message-----
From: fedora-xen-bounces(a)redhat.com
[mailto:fedora-xen-bounces@redhat.com] On Behalf Of Justin Conover
Sent: Saturday, October 28, 2006 12:44 PM
To: Fedora-xen(a)redhat.com
Subject: [Fedora-xen] does fully virtualized work?
I create one, the install goes fine, as it is installing I see it with
(xm list).
I hit reboot in the installer after it is finished, then it just
dissappears.
xm list
Domain-0
You can see the file created in the install_dir
17 years, 6 months
Brigde configuration
by Tiago Cruz
Hello again fedora-guys!
I'm getting one strange problem with FC5 running on XEN 3.0.3 x64, and I
suspect of my bridge configuration (I never did this before on fedora):
File sysconfig/network-scripts/ifcfg-eth0:
DEVICE=eth0
TYPE=Ethernet
BRIDGE=xenbr0
ONBOOT=yes
File sysconfig/network-scripts/ifcfg-xenbr0:
DEVICE=xenbr0
TYPE=BRIDGE
BOOTPROTO=dhcp
ONBOOT=yes
Is it correct this bridge configuration?
Because I have a lot of messages on my console, like this (dmesg):
printk2: 2 messages suppressed
vif0.0: "received packet with own address as source address"
printk2: 4775 messages suppressed
vif0.0: "received packet with own address as source address"
printk2: 165845 messages suppressed
vif0.0: "received packet with own address as source address"
printk2: 186540 messages suppressed
xenbr0: port 3(eth0) entering disabled state
xenbr0: port 1(vif0.0) entering disabled state
device eth0 left promiscuous mode
audit(1161983401.126:10): dev=eth0 prom=0 old_prom=256 auid=4294967295
xenbr0: port 3(eth0) entering disabled state
And the worst part: The MRTG point to my machine with XEN running one
absurd volume of output data sent (normal is around 6 MB/s) and when XEN
is working we get 80 MB/s until my DRAC is alive... after this, the
machine crash, DRAC stop to reply, swith stop do work together...
Anyone knows whats happening now? ;)
Many thanks for any comments!
Tiago Cruz
17 years, 6 months
What is the magic mount sauce?
by Paul Clark
I want to mount my local CDROM to create a new guest using the
Paravirtualization. Other parameters are RAM=512mb, disk=5gig, and
cpu=1. I have tried the HTTP and NFS protocols. I was able to access
the drive and files from another machines so I know I have the network
configuration correct. BUT... when I pass the location to the
xenguest-install script and the virt-manager I receive an error about
the URL.
ERROR: Invalid URL location given: [Errno 14] HTTP Error 404: Date: Sun,
29 Oct 2006 07:35:11 GMT
Server: Apache/2.2.2 (Win32) PHP/5.2.0-dev mod_ssl/2.2.2 OpenSSL/0.9.8b
mod_jk/1.2.15 mod_perl/2.0.3-dev Perl/v5.8.8
Vary: Accept-Encoding
Content-Length: 232
Content-Type: text/html; charset=iso-8859-1
What I think is weird is when I use the Fedora site it works,
http://download.fedora.redhat.com/pub/fedora/linux/core/6/x86_64/os/
Any ideas?
17 years, 6 months
xenguest-install error
by Adrian Chadd
This is from FC5:
Starting install...
libvir: error : operation virDomainCreateLinux forbidden for read only access
Traceback (most recent call last):
File "/usr/sbin/xenguest-install.py", line 460, in ?
main()
File "/usr/sbin/xenguest-install.py", line 451, in main
start_paravirt_install(name, ram, disk, mac, uuid, src, options.extra)
File "/usr/sbin/xenguest-install.py", line 331, in start_paravirt_install
dom = conn.createLinux(cfgxml, 0)
File "/usr/lib/python2.4/site-packages/libvirt.py", line 249, in createLinux
if ret is None:raise libvirtError('virDomainCreateLinux() failed')
Changing to call to openReadOnly() to open() (as per an August post to
fedora-devel suggests) gives this:
Traceback (most recent call last):
File "/usr/sbin/xenguest-install.py", line 460, in ?
main()
File "/usr/sbin/xenguest-install.py", line 451, in main
start_paravirt_install(name, ram, disk, mac, uuid, src, options.extra)
File "/usr/sbin/xenguest-install.py", line 324, in start_paravirt_install
conn = libvirt.open(None)
File "/usr/lib/python2.4/site-packages/libvirt.py", line 39, in open
if ret is None:raise libvirtError('virConnectOpen() failed')
libvirt.libvirtError: virConnectOpen() failed
Has anyone successfully used xenguest-install.py under FC5 recently?
Adrian
17 years, 6 months
Problems with pciback.hide
by Patrick Heckeler
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Hi folks,
I installed sucessfully 2 virtual machines on a fedora core 6 system.
When I try to use the grub command "pciback.hide", I retrieve an error
message while booting my dom0... I read an article which says, that it
might be possible, that the pciback.hide feature is not activated in the
kernel... Does anybody know how to activate this feature?
Thanks a lot...
- --
Viele Grüße
Patrick Heckeler
Teckstr. 6
72074 Tübingen
Germany
Mobil: +49172 / 719 23 24
Homezone: +497071 / 28 47 33
email: heckeler [at] web [dot] de
skype: p_heckeler
ICQ: 200910972
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.2.2 (GNU/Linux)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org
iD8DBQFFQMsU23tKQtXqwP4RAoeLAJ9qWfnyZkQFhRGhnpAZ8IKcWp4gkwCeNpJK
gFZ4hwa4rCAXDI2dsY1Sing=
=pD/L
-----END PGP SIGNATURE-----
17 years, 6 months
