RE: FW: need your help
by Iqbal Ashraf, Noida
Dear Pinto,
I was using the version: 2.6.15-1.2054_FC5 .so, I will now try with the
version specified by you.
Thanks for the reply.
With Regards
Iqbal Ashraf
-----Original Message-----
From: Leonardo Pinto [mailto:listas@openlogic.com.br]
Sent: Thursday, June 01, 2006 5:50 PM
To: Iqbal Ashraf, Noida
Cc: Fedora Xen
Subject: Re: FW: need your help
*** An advice: He makes the description of its environment, generally
aid
very in these hours.
Good, as you must have read in post previous, I ONLY got the functioning
of the network in the version: 2.6.16-1.2096_FC5. And in this same
version,
I face some problems of performance with disk I/O.
By incredible that seems, you are certain. This loaded module in the
DomU's
is only enough. -> "alias eth0 xennet" in "/etc/modprobe.conf"
If not to function, only can be problem of the Xen in your Linux
distribution.
--
Leonardo Pinto
listas#openlogic dot com br
On Thu, 1 Jun 2006 11:49:26 +0530, Iqbal Ashraf, Noida wrote
> Hi
Pinto,I am also getting the
same problem and could not find a solution to it. If you have been able
to find
it, can you please help
me.
> I already
tried to configure "alias eth0 xennet"
in:"/etc/modprobe.conf". However I do not get
success!Simply the domain does
not obtain to see of form some the
interface.
Bringing up interface
eth0: xennet device eth0 does not seem to be
present,delaying
initialization.[FAILED]
With
RegardsIqbal
Ashraf
DISCLAIMER:
-----------------------------------------------------------------------------------------------------------------------
The contents of this e-mail and any attachment(s) are confidential and intended for the named recipient(s) only.
It shall not attach any liability on the originator or HCL or its affiliates. Any views or opinions presented in
this email are solely those of the author and may not necessarily reflect the opinions of HCL or its affiliates.
Any form of reproduction, dissemination, copying, disclosure, modification, distribution and / or publication of
this message without the prior written consent of the author of this e-mail is strictly prohibited. If you have
received this email in error please delete it and notify the sender immediately. Before opening any mail and
attachments please check them for viruses and defect.
-----------------------------------------------------------------------------------------------------------------------
17 years, 11 months
Re: FW: need your help
by Leonardo Pinto
*** An advice: He makes the description of its environment, generally aid
very in these hours.
Good, as you must have read in post previous, I ONLY got the functioning
of the network in the version: 2.6.16-1.2096_FC5. And in this same version,
I face some problems of performance with disk I/O.
By incredible that seems, you are certain. This loaded module in the DomU's
is only enough. -> "alias eth0 xennet" in "/etc/modprobe.conf"
If not to function, only can be problem of the Xen in your Linux distribution.
--
Leonardo Pinto
listas#openlogic dot com br
On Thu, 1 Jun 2006 11:49:26 +0530, Iqbal Ashraf, Noida wrote
> Hi
Pinto,I am also getting the
same problem and could not find a solution to it. If you have been able to find
it, can you please help
me.
> I already
tried to configure "alias eth0 xennet"
in:"/etc/modprobe.conf". However I do not get
success!Simply the domain does
not obtain to see of form some the
interface.
Bringing up interface
eth0: xennet device eth0 does not seem to be
present,delaying
initialization.[FAILED]
With
RegardsIqbal
Ashraf
17 years, 11 months
[patch] cleanup linux-2.6-xen-sparce
by Akio Takebe
Hi, Alex and Aron
This is a cleanup patch.
Signed-off-by: Akio Takebe <takebe_akio(a)jp.fujitsu.com>
Best Regards,
Akio Takebe
diff -r acabf4bdec4f linux-2.6-xen-sparse/arch/ia64/xen/hypervisor.c
--- a/linux-2.6-xen-sparse/arch/ia64/xen/hypervisor.c Wed May 31 13:
05:21 2006 -0600
+++ b/linux-2.6-xen-sparse/arch/ia64/xen/hypervisor.c Mon Jun 05 18:
55:47 2006 +0900
@@ -564,7 +564,7 @@ xen_ia64_privcmd_entry_munmap(struct xen
entry->gpfn = INVALID_GPFN;
}
-static int
+static void
xen_ia64_privcmd_entry_open(struct xen_ia64_privcmd_range*
privcmd_range,
int i)
{
@@ -576,7 +576,7 @@ xen_ia64_privcmd_entry_open(struct xen_i
}
}
-static int
+static void
xen_ia64_privcmd_entry_close(struct xen_ia64_privcmd_range*
privcmd_range,
int i)
{
17 years, 11 months
RE: [Fedora-xen] FW: [IA64]We have successfully booted dom0/domU/domVTI (xen/ia64) on FC5
by Zhang, Xiantao
Hi Aron,
I have checked CSet 34 and found IDE driver has been removed in XenU configuration. It is fine with me now.:)
Thanks
-Xiantao
> -----Original Message-----
> From: Aron Griffis [mailto:aron@hp.com]
> Sent: 2006年6月1日 10:22
> To: Zhang, Xiantao
> Cc: fedora-xen(a)redhat.com
> Subject: Re: [Fedora-xen] FW: [IA64]We have successfully booted
> dom0/domU/domVTI (xen/ia64) on FC5
>
> Zhang, Xiantao wrote: [Wed May 31 2006, 10:17:41PM EDT]
> > I saw the issue was fixed by CSet 33. Did you encounter it after
> > Cset 33? :)
>
> Cset 33 was a huge screwup of mine. Somehow I saved a kernel with
> CONFIG_XEN *unset* as the xenU config. I reverted it in cset 34 but
> disabled some other hardware that obviously won't be available in an
> unprivileged environment.
>
> Please look at the config in cset 34 and let me know if I missed
> something.
>
> Aron
17 years, 11 months
RE: [Fedora-xen] FW: [IA64]We have successfully booteddom0/domU/domVTI (xen/ia64) on FC5
by Zhang, Xiantao
I will check it at latest CSet. If necessary, I will send out the patch :)
Thanks
-Xiantao
> -----Original Message-----
> From: Aron Griffis [mailto:aron@hp.com]
> Sent: 2006年6月1日 10:24
> To: Zhang, Xiantao
> Cc: Jeremy Katz; fedora-xen(a)redhat.com
> Subject: Re: [Fedora-xen] FW: [IA64]We have successfully
> booteddom0/domU/domVTI (xen/ia64) on FC5
>
> Zhang, Xiantao wrote: [Wed May 31 2006, 10:21:12PM EDT]
> > Currently the ext3 is compiled as module, however initrd doesn't
> > work for domU even when we add "ramdisk=" in config file. So we
> > change ext3 to be kernel built-in, and then domU can boot up
> > immediately.
>
> Could you provide more details how you're configuring it to use the
> initrd?
>
> Aron
17 years, 11 months
RE: [Fedora-xen] FW: [IA64]We have successfully booteddom0/domU/domVTI (xen/ia64) on FC5
by Zhang, Xiantao
We configured it (compiled out by spec) as the option ramdisk in XenU 's configuration file, and then boot it directly. Any other steps needed ?
Thanks
-Xiantao
> -----Original Message-----
> From: Aron Griffis [mailto:aron@hp.com]
> Sent: 2006年6月1日 10:24
> To: Zhang, Xiantao
> Cc: Jeremy Katz; fedora-xen(a)redhat.com
> Subject: Re: [Fedora-xen] FW: [IA64]We have successfully
> booteddom0/domU/domVTI (xen/ia64) on FC5
>
> Zhang, Xiantao wrote: [Wed May 31 2006, 10:21:12PM EDT]
> > Currently the ext3 is compiled as module, however initrd doesn't
> > work for domU even when we add "ramdisk=" in config file. So we
> > change ext3 to be kernel built-in, and then domU can boot up
> > immediately.
>
> Could you provide more details how you're configuring it to use the
> initrd?
>
> Aron
17 years, 11 months
RE: [Fedora-xen] FW: [IA64]We have successfully booted dom0/domU/domVTI (xen/ia64) on FC5
by Zhang, Xiantao
Hi Aron,
> -----Original Message-----
> From: Aron Griffis [mailto:aron@hp.com]
> Sent: 2006年6月1日 3:13
> To: Zhang, Xiantao
> Cc: fedora-xen(a)redhat.com
> Subject: Re: [Fedora-xen] FW: [IA64]We have successfully booted
> dom0/domU/domVTI (xen/ia64) on FC5
>
> Zhang, Xiantao wrote: [Fri May 26 2006, 09:38:51AM EDT]
> > >> - The configuration files for dom0/domU seems a big difference
> > >> compared to xen-ia64-unstable.hg. (Why?) Currently the ext3 is
> > >> compiled as module, however initrd doesn't work for domU even
> > >> when we add "ramdisk=" in config file. So we change ext3 to be
> > >> kernel built-in, and then domU can boot up immediately.
> > >
> > > Ok, I'll fix that in the rpm.
> >
> > OK.
>
> I added ext3 as 'y' instead of module, this is now in the
> fedora-kernel-ia64 repo.
>
> > >> - Xen-ia64-unstable.hg doesn't have IDE devices configured for
> > >> domU, however fedora-kernel-ia64 does, which wastes much time
> > >> for probe. If the configuration file can be kept consistence
> > >> with xen-ia64-unstable.hg, above issues are gone.
> > > That's my mistake too. I'll fix it.
> > OK too:)
>
> On investigation, I don't see IDE configured for the xenU kernel.
> Could you point out the specific problem, or send a patch to the
> config?
I saw the issue was fixed by CSet 33. Did you encounter it after Cset 33? :)
> Thanks,
> Aron
17 years, 11 months