Re: [Fedora-xen] domU stops at --> EXT3 FS on sda1, internal journal

[Todd Deshane]

Hi,

On Fri, Feb 22, 2008 at 2:13 PM, Naveen R <raveenr(a)gmail.com&gt; wrote:

>  Hello everyone, i am using fedora 7 and tried to run the xen images
>  available at jailtime.org site and was able to start the os but it stops
>  after the following log and will not proceed any further. The state in
>  virt-manager shows its running but the console stops after the following.
>  Can anyone tell me whats the problem. Thanks in advance.
>  


Try to Add the following line the guest config file:

extra="xencons=tty"

Best Regards,
Todd




>  Using config file "/xen/debian.4-0/debian.4-0.xen3.cfg".
>  Started domain debian.4-0
>  Linux version 2.6.20-2925.9.fc7xen (
>  kojibuilder(a)xenbuilder4.fedora.phx.redhat.com) (gcc version 4.1.2 20070502
>  (Red Hat 4.1.2-12)) #1 SMP Tue May 22 08:53:03 EDT 2007
>  BIOS-provided physical RAM map:
>  sanitize start
>  sanitize bail 0
>  copy_e820_map() start: 0000000000000000 size: 000000000bc00000 end:
>  000000000bc00000 type: 1
>   Xen: 0000000000000000 - 000000000bc00000 (usable)
>  0MB HIGHMEM available.
>  188MB LOWMEM available.
>  NX (Execute Disable) protection: active
>  Zone PFN ranges:
>    DMA             0 ->    48128
>    Normal      48128 ->    48128
>    HighMem     48128 ->    48128
>  early_node_map[1] active PFN ranges
>      0:        0 ->    48128
>  ACPI in unprivileged domain disabled
>  Built 1 zonelists.  Total pages: 47752
>  Kernel command line: root=/dev/sda1 ro ip=:1.2.3.4::::eth0:dhcp
>  Enabling fast FPU save and restore... done.
>  Enabling unmasked SIMD FPU exception support... done.
>  Initializing CPU#0
>  CPU 0 irqstacks, hard=c135f000 soft=c133f000
>  PID hash table entries: 1024 (order: 10, 4096 bytes)
>  Xen reported: 1804.083 MHz processor.
>  Console: colour dummy device 80x25
>  Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
>  ... MAX_LOCKDEP_SUBCLASSES:    8
>  ... MAX_LOCK_DEPTH:          30
>  ... MAX_LOCKDEP_KEYS:        2048
>  ... CLASSHASH_SIZE:           1024
>  ... MAX_LOCKDEP_ENTRIES:     8192
>  ... MAX_LOCKDEP_CHAINS:      16384
>  ... CHAINHASH_SIZE:          8192
>   memory used by lock dependency info: 1064 kB
>   per task-struct memory footprint: 1200 bytes
>  Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
>  Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
>  Software IO TLB disabled
>  vmalloc area: cc800000-f4ffe000, maxmem 2d7fe000
>  Memory: 168448k/192512k available (2030k kernel code, 15688k reserved,
>  1079k data, 180k init, 0k highmem)
>  virtual kernel memory layout:
>      fixmap  : 0xf5315000 - 0xf57fe000   (5028 kB)
>      pkmap   : 0xf5000000 - 0xf5200000   (2048 kB)
>      vmalloc : 0xcc800000 - 0xf4ffe000   ( 647 MB)
>      lowmem  : 0xc0000000 - 0xcbc00000   ( 188 MB)
>        .init : 0xc130e000 - 0xc133b000   ( 180 kB)
>        .data : 0xc11fb8b9 - 0xc1309714   (1079 kB)
>        .text : 0xc1000000 - 0xc11fb8b9   (2030 kB)
>  Checking if this processor honours the WP bit even in supervisor mode...
>  Ok.
>  Calibrating delay using timer specific routine.. 4512.90 BogoMIPS
>  (lpj=9025800)
>  Security Framework v1.0.0 initialized
>  SELinux:  Initializing.
>  SELinux:  Starting in permissive mode
>  selinux_register_security:  Registering secondary module capability
>  Capability LSM initialized as secondary
>  Mount-cache hash table entries: 512
>  CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>  CPU: L2 Cache: 512K (64 bytes/line)
>  Checking 'hlt' instruction... OK.
>  SMP alternatives: switching to UP code
>  Freeing SMP alternatives: 11k freed
>  Brought up 1 CPUs
>  Grant table initialized
>  NET: Registered protocol family 16
>  Brought up 1 CPUs
>  PCI: Fatal: No config space access function found
>  PCI: setting up Xen PCI frontend stub
>  Setting up standard PCI resources
>  BUG: at kernel/fork.c:994 copy_process()
>   [<c1005d9e>] show_trace_log_lvl+0x1a/0x2f
>   [<c1006347>] show_trace+0x12/0x14
>   [<c10063c2>] dump_stack+0x16/0x18
>   [<c101d040>] copy_process+0x195/0x1245
>   [<c101e140>] do_fork+0x50/0x117
>   [<c1003351>] kernel_thread+0x8e/0x96
>   [<c102c6fd>] __call_usermodehelper+0x2d/0x46
>   [<c102cd4b>] run_workqueue+0x89/0x145
>   [<c102d70d>] worker_thread+0xd5/0x102
>   [<c102ff23>] kthread+0xb3/0xdc
>   [<c10058df>] kernel_thread_helper+0x7/0x10
>   =======================
>  ACPI: Interpreter disabled.
>  Linux Plug and Play Support v0.97 (c) Adam Belay
>  pnp: PnP ACPI: disabled
>  xen_mem: Initialising balloon driver.
>  usbcore: registered new interface driver usbfs
>  usbcore: registered new interface driver hub
>  usbcore: registered new device driver usb
>  PCI: System does not support PCI
>  PCI: System does not support PCI
>  NetLabel: Initializing
>  NetLabel:  domain hash size = 128
>  NetLabel:  protocols = UNLABELED CIPSOv4
>  NetLabel:  unlabeled traffic allowed by default
>  NET: Registered protocol family 2
>  IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
>  TCP established hash table entries: 8192 (order: 6, 262144 bytes)
>  TCP bind hash table entries: 4096 (order: 5, 131072 bytes)
>  TCP: Hash tables configured (established 8192 bind 4096)
>  TCP reno registered
>  checking if image is initramfs... it is
>  Freeing initrd memory: 7272k freed
>  IA-32 Microcode Update Driver: v1.14-xen <tigran(a)veritas.com&gt;
>  audit: initializing netlink socket (disabled)
>  audit(1202740570.370:1): initialized
>  VFS: Disk quotas dquot_6.5.1
>  Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>  SELinux:  Registering netfilter hooks
>  io scheduler noop registered
>  io scheduler anticipatory registered
>  io scheduler deadline registered
>  io scheduler cfq registered (default)
>  pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>  rtc: IRQ 8 is not free.
>  Non-volatile memory driver v1.2
>  Linux agpgart interface v0.101 (c) Dave Jones
>  RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>  input: Macintosh mouse button emulation as /class/input/input0
>  Xen virtual console successfully installed as xvc0
>  Event-channel device installed.
>  usbcore: registered new interface driver libusual
>  usbcore: registered new interface driver hiddev
>  usbcore: registered new interface driver usbhid
>  drivers/usb/input/hid-core.c: v2.6:USB HID core driver
>  PNP: No PS/2 controller found. Probing ports directly.
>  i8042.c: No controller found.
>  mice: PS/2 mouse device common for all mice
>  TCP bic registered
>  Initializing XFRM netlink socket
>  NET: Registered protocol family 1
>  NET: Registered protocol family 17
>  Using IPI No-Shortcut mode
>  XENBUS: Device with no driver: device/vbd/2049
>  XENBUS: Device with no driver: device/vbd/2050
>  Freeing unused kernel memory: 180k freed
>  Write protecting the kernel read-only data: 762k
>  Registering block device major 8
>  blkfront: sda1: barriers enabled
>  blkfront: sda2: barriers enabled
>  USB Universal Host Controller Interface driver v3.0
>  ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>  SCSI subsystem initialized
>  register_blkdev: cannot get major 8 for sd
>  libata version 2.00 loaded.
>  netfront: Initialising virtual ethernet driver.
>  kjournald starting.  Commit interval 5 seconds
>  EXT3-fs: mounted filesystem with ordered data mode.
>  Adding 65528k swap on /dev/sda2.  Priority:-1 extents:1 across:65528k
>  EXT3 FS on sda1, internal journal
>
>
>  --
>  Fedora-xen mailing list
>  Fedora-xen(a)redhat.com
>  https://www.redhat.com/mailman/listinfo/fedora-xen
>
>