On Mon, Jul 27, 2009 at 10:45:06PM +0100, Daniel P. Berrange wrote:
On Tue, Jul 28, 2009 at 12:39:17AM +0300, Pasi K?rkk?inen wrote:
> On Tue, Mar 24, 2009 at 07:28:46PM +0000, Daniel P. Berrange wrote:
> > On Tue, Mar 24, 2009 at 09:25:02PM +0200, Pasi K?rkk?inen wrote:
> > > Hello!
> > >
> > > I've used a lot of time trying to get my custom Xen pv_ops dom0 kernel
> > > virt-install and/or virt-manager on Fedora 10, and now it seems I got
> > > working.
> > >
> > > If you want to play with this you need:
> > >
> > > 1) New enough pv_ops dom0 kernel (2.6.29-rc8 or newer) so it has
/sys/hypervisor support included
> > > - Compile with CONFIG_HIGHPTE=n since it seems to be broken still
> > > 2) libvirt 0.6.1 and related packages from Fedora 10 updates-testing
> > >
> > > In addition to those I'm using Xen 3.3.1-9 packages from rawhide/F11
rebuilt for F10.
> > >
> > > With the older Fedora 10 libvirt packages libvirtd was crashing often for
> > > I had some other issues with virt-install console window not opening but
> > >
> > > Today I was able to run the following on Fedora 10 32bit PAE pv_ops dom0:
> > >
> > > - CentOS 5.3 32bit PAE PV domU
> > > - Fedora 10 32bit PAE PV domU
> > > - Use virt-install to install Fedora 10 32bit PAE PV domU (using custom
> > > to force PAE kernel installation to avoid the anaconda BUG which installs
> > > wrong non-PAE kernel as a default).
> > >
> > > Fedora 11 (rawhide) installation most probably works too.
> > FYI, I've just testing i686 and x86_64 Fedora 11 guest installs on a
> > RHEL5 Xen host and they both work flawlessly out of the box - including
> > a sane mouse pointer running in absolute, so no dual-cursor problems,
> > and installing correect PAE kernels
> Replying to old thread.. today I tried installing F11 i386 domU with
> virt-install on centos 5.3 x86_64 dom0, and it doesn't seem to work..
> The graphical VNC console doesn't show up, and it seems the domU kernel
> x86_64 domU installation on x86_64 dom0 seems to work though.
> Are you sure i386 on x86_64 worked for you?
Yep, just checked my RHEL-5 box and it has this config
name = "f11i686xen"
uuid = "1417ac4b-bd9a-61cc-6faf-8e842cd72cb9"
maxmem = 900
memory = 500
vcpus = 1
bootloader = "/usr/bin/pygrub"
on_poweroff = "destroy"
on_reboot = "restart"
on_crash = "restart"
vfb = [ "type=vnc,vncunused=1" ]
disk = [ "tap:aio:/var/lib/xen/images/f11i686.img,xvda,w" ]
vif = [ "mac=00:16:3e:71:38:63,bridge=xenbr0" ]
Nothing weird here.. My guest has 1 vcpu aswell, and I'm using vnc.
And the guest disk is fully instlaled
# ls -lhs /var/lib/xen/images/f11i686.img
3.4G -rwxr-xr-x 1 root root 5.1G Jun 4 06:33 /var/lib/xen/images/f11i686.img
FWIW, the guest kernel here is 2.6.29-0.258.rc8.git2.fc11.i686.PAE
So its possible things have changed since I did my install ....
Default kernel in Fedora 11 is: kernel-PAE-184.108.40.206-167.fc11.i686.rpm
Also my x86_64 host only has 2 GB of RAM, so if there's any bugs
i686 guests at the >4GB phys RAM mark I wouldn't have seen them
My guests were using 512 MB and 1024 MB of RAM..
I tried again now, and yes, F10 and F11 i386 guests fail on CentOS 5.3
x86_64 dom0 with domU kernel crashes like this:
Checking if this processor honours the WP bit even in supervisor mode...Ok.
1 multicall(s) failed: cpu 0
Pid: 0, comm: swapper Not tainted 220.127.116.11-167.fc11.i686.PAE #1
[<c0714be7>] ? printk+0x14/0x1d
------------[ cut here ]------------
kernel BUG at arch/x86/xen/multicalls.c:180!
invalid opcode: 0000 [#1] SMP
Hmm.. I wonder what's causing this.
Can you test if it works for you?
I used virt-install like this:
virt-install --debug -n testvm -r 512 --vcpus=1 -f /dev/VolGroup00/testvm_disk --vnc -p -l
The graphical VNC console newer shows up, and when I run "xm console testvm"
I see that kernel crash.