New subject: Question to virt-install and fully virt. guests (virtual-cd-rom)

4 Dec 2006


      Hi all,
has nobody an idea? This point and my question is completely missing in 
the wiki (http://fedoraproject.org/wiki/FedoraXenQuickstartFC6) and also 
google is empty for that... :-(
Any hint would be kindly appreciated :-)
Thank you very much and best regards,
Thomas
-------- Original-Nachricht --------
Betreff: 	[Fedora-xen] Question to virt-install and fully virt. guests 
(virt cd-rom)
Datum: 	Sun, 03 Dec 2006 19:59:33 +0100
Von: 	Thomas Trepper thomas.trepper@microbyte.at
An: 	fedora-xen@redhat.com
Hi all,
i have a problem with 'virt-install' as follows:
--------------------------
[root@gandalf ~]# uname -a: Linux gandalf 2.6.18-1.2849.fc6xen #1 SMP 
Fri Nov 10 12:57:36 EST 2006 x86_64 x86_64 x86_64 GNU/Linux
[root@gandalf ~]# grep vmx /proc/cpuinfo
flags           : fpu tsc msr pae mce cx8 apic mtrr mca cmov pat pse36 
clflush dts acpi mmx fxsr sse sse2 ss ht tm syscall lm constant_tsc pni 
monitor ds_cpl vmx est tm2 cx16 xtpr lahf_lm
flags           : fpu tsc msr pae mce cx8 apic mtrr mca cmov pat pse36 
clflush dts acpi mmx fxsr sse sse2 ss ht tm syscall lm constant_tsc pni 
monitor ds_cpl vmx est tm2 cx16 xtpr lahf_lm
[root@gandalf ~]# cat /sys/hypervisor/properties/capabilities
xen-3.0-x86_64 hvm-3.0-x86_32 hvm-3.0-x86_32p hvm-3.0-x86_64
--------------------------
Question: If i am going to execute 'virt-install' and if i answer yes to 
the question, if i would like to create a fully virtualized guest, i 
have to enter some questions later a virtual cd-rom, but i do not know, 
what i have to enter here? I tried the iso, mounted iso as ftp or nfs, 
everything no luck.
Does anybody know, what i am doing wrong?
Thank you very much and kind regards,
Thomas
--
Fedora-xen mailing list
Fedora-xen@redhat.com
https://www.redhat.com/mailman/listinfo/fedora-xen
[root@gandalf ~]# xm dmesg
 __  __            _____  ___   _____             ____    __       __
 \ / /___ _ __   |___ / / _ \ |___ /    _ __ ___| ___|  / _| ___ / /_
  \  // _ \ '_ \    |_ | | | |  |_ \ __| '__/ __|___ \ | |_ / __| '_ \
  /  \  __/ | | |  ___) | |_| | ___) |__| | | (__ ___) ||  _| (__| (_) |
 /_/____|_| |_| |____(_)___(_)____/   |_|  ___|____(_)_|  ___|___/
http://www.cl.cam.ac.uk/netos/xen
 University of Cambridge Computer Laboratory
Xen version 3.0.3-rc5-1.2849.fc6 (brewbuilder@build.redhat.com) (gcc version 4.1.1 20061011 (Red Hat 4.1.1-30)) Fri Nov 10 12:30:42 EST 2006
 Latest ChangeSet: unavailable
(XEN) Command line: /boot/xen.gz-2.6.18-1.2849.fc6
(XEN) Physical RAM map:
(XEN)  0000000000000000 - 000000000009fc00 (usable)
(XEN)  000000000009fc00 - 00000000000a0000 (reserved)
(XEN)  00000000000e5000 - 0000000000100000 (reserved)
(XEN)  0000000000100000 - 000000007ff80000 (usable)
(XEN)  000000007ff80000 - 000000007ff8e000 (ACPI data)
(XEN)  000000007ff8e000 - 000000007ffe0000 (ACPI NVS)
(XEN)  000000007ffe0000 - 0000000080000000 (reserved)
(XEN)  00000000ffb00000 - 0000000100000000 (reserved)
(XEN) System RAM: 2047MB (2096252kB)
(XEN) Xen heap: 14MB (14388kB)
(XEN) found SMP MP-table at 000ff780
(XEN) DMI 2.3 present.
(XEN) Using APIC driver default
(XEN) ACPI: RSDP (v000 ACPIAM                                ) @ 0x00000000000fa400
(XEN) ACPI: RSDT (v001 A M I  OEMRSDT  0x07000620 MSFT 0x00000097) @ 0x000000007ff80000
(XEN) ACPI: FADT (v001 A M I  OEMFACP  0x07000620 MSFT 0x00000097) @ 0x000000007ff80200
(XEN) ACPI: MADT (v001 A M I  OEMAPIC  0x07000620 MSFT 0x00000097) @ 0x000000007ff80390
(XEN) ACPI: OEMB (v001 A M I  AMI_OEM  0x07000620 MSFT 0x00000097) @ 0x000000007ff8e040
(XEN) ACPI: MCFG (v001 A M I  OEMMCFG  0x07000620 MSFT 0x00000097) @ 0x000000007ff898a0
(XEN) ACPI: DSDT (v001  A0520 A0520000 0x00000000 INTL 0x02002026) @ 0x0000000000000000
(XEN) ACPI: Local APIC address 0xfee00000
(XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
(XEN) Processor #0 6:15 APIC version 20
(XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
(XEN) Processor #1 6:15 APIC version 20
(XEN) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
(XEN) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
(XEN) IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
(XEN) ACPI: IOAPIC (id[0x03] address[0xfec10000] gsi_base[24])
(XEN) IOAPIC[1]: apic_id 3, version 32, address 0xfec10000, GSI 24-47
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
(XEN) ACPI: IRQ0 used by override.
(XEN) ACPI: IRQ2 used by override.
(XEN) ACPI: IRQ9 used by override.
(XEN) Enabling APIC mode:  Flat.  Using 2 I/O APICs
(XEN) Using ACPI (MADT) for SMP configuration information
(XEN) Using scheduler: SMP Credit Scheduler (credit)
(XEN) Initializing CPU#0
(XEN) Detected 2404.184 MHz processor.
(XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
(XEN) CPU: Physical Processor ID: 0
(XEN) CPU: Processor Core ID: 0
(XEN) VMXON is done
(XEN) Intel machine check architecture supported.
(XEN) Intel machine check reporting enabled on CPU#0.
(XEN) CPU0: Intel(R) Core(TM)2 CPU          6600  @ 2.40GHz stepping 06
(XEN) Booting processor 1/1 eip 90000
(XEN) Initializing CPU#1
(XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
(XEN) CPU: Physical Processor ID: 0
(XEN) CPU: Processor Core ID: 1
(XEN) VMXON is done
(XEN) Intel machine check architecture supported.
(XEN) Intel machine check reporting enabled on CPU#1.
(XEN) CPU1: Intel(R) Core(TM)2 CPU          6600  @ 2.40GHz stepping 06
(XEN) Total of 2 processors activated.
(XEN) ENABLING IO-APIC IRQs
(XEN)  -> Using new ACK method
(XEN) ..TIMER: vector=0xF0 apic1=0 pin1=2 apic2=-1 pin2=-1
(XEN) checking TSC synchronization across 2 CPUs: passed.
(XEN) Platform timer is 1.193MHz PIT
(XEN) Brought up 2 CPUs
(XEN) Machine check exception polling timer started.
(XEN) *** LOADING DOMAIN 0 ***
(XEN) Domain 0 kernel supports features = { 0000001f }.
(XEN) Domain 0 kernel requires features = { 00000000 }.
(XEN) PHYSICAL MEMORY ARRANGEMENT:
(XEN)  Dom0 alloc.:   000000007e000000->000000007f000000 (477699 pages to be allocated)
(XEN) VIRTUAL MEMORY ARRANGEMENT:
(XEN)  Loaded kernel: ffffffff80200000->ffffffff806b8264
(XEN)  Init. ramdisk: ffffffff806b9000->ffffffff80a98000
(XEN)  Phys-Mach map: ffffffff80a98000->ffffffff80e45018
(XEN)  Start info:    ffffffff80e46000->ffffffff80e4649c
(XEN)  Page tables:   ffffffff80e47000->ffffffff80e52000
(XEN)  Boot stack:    ffffffff80e52000->ffffffff80e53000
(XEN)  TOTAL:         ffffffff80000000->ffffffff81000000
(XEN)  ENTRY ADDRESS: ffffffff80200000
(XEN) Dom0 has maximum 2 VCPUs
(XEN) Initrd len 0x3df000, start at 0xffffffff806b9000
(XEN) Scrubbing Free RAM: .....................done.
(XEN) Xen trace buffers: disabled
(XEN) Xen is relinquishing VGA console.
(XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to Xen).
(XEN) (file=hvm.c, line=195) Allocated port 3 for hvm.
(XEN) vmx_do_launch(): GUEST_CR3<=00fd97a0, HOST_CR3<=7ec67000
(XEN) (file=hvm.c, line=195) Allocated port 3 for hvm.
(XEN) vmx_do_launch(): GUEST_CR3<=00fd97a0, HOST_CR3<=7ea9f000