[fedora-arm] RE: Windowing under Fedora_ARM (was Serial console under Fedora_ARM)

Vijay Raju vijay at embeddedmachines.com
Fri Aug 21 09:39:29 UTC 2009

Hi Kedar,

After a lot of playing around with X I finally gave up and switched to Qt. I
finally got the display to work with the touchscreen yesterday.

Attached is a picture of the test setup and our hardware platform. Thanks
for all the help.

Warm Regards,
Vijay Raju 

-----Original Message-----
From: Kedar Sovani [mailto:kedars at marvell.com] 
Sent: 15 August 2009 08:46
To: Vijay Raju
Cc: Prabhanjan Sarnaik; fedora-arm at redhat.com
Subject: RE: Windowing under Fedora_ARM (was Serial console under

Hi Vijay,

> -----Original Message-----
> From: Vijay Raju [mailto:vijay at embeddedmachines.com]
> Sent: 14 August 2009 09:31
> To: Kedar Sovani
> Cc: Prabhanjan Sarnaik
> Subject: RE: Windowing under Fedora_ARM (Serial console under
> Fedora_ARM)
> Hi Kedar,
> Over the last couple of weeks I have been working on beefing up
> our kernel
> to get a whole variety of devices up and running. One of my
> primary
> intentions while adopting fedora was to simplify the testing
> and adoption of
> these devices in various ongoing project. So far things have
> been working
> out great. We have had a good measure of success with devices
> on the USB
> host. We were quickly able to integrate a WLAN dongle, HID
> devices and mass
> storage.

Cool, this is great! :-)

> The next challenge is a UI. I already have a framebuffer device
> and a
> touchscreen controller driver written and compiled into the
> kernel. I have
> never worked on any kind of UI systems or window managers and I
> am pretty
> much starting from scratch. Considering that, could you suggest
> a set of
> packages that I could use to build up a quick demo showcasing
> the LCD and
> the touchscreen. 

We have managed to get the Gnome stack functional on the ARM board. Here is
a blog post that talks about that.

You have to install the X and the Gnome package groups from the
repositories. I suppose there are a couple of packages missing from the
group, you might have to skip them manually (These are already built, just
that they haven't hit the externally published repositories yet.) A detailed
listed of steps is available here:

Once that is done you should be able to get the X going. There were a few
other problems seen when we installed a system this large a size. These are
documented in here:

I haven't given a shot to the touch-screen interfaces though. If you are
looking for any set(s) of packages for the purpose, that aren't still in
there, do let me know.

> Warm Regards,
> Vijay Raju


-------------- next part --------------
A non-text attachment was scrubbed...
Name: 210820091875.jpg
Type: image/jpeg
Size: 44810 bytes
Desc: not available
Url : http://lists.fedoraproject.org/pipermail/arm/attachments/20090821/0d020ca5/attachment.jpg 

More information about the arm mailing list