[fedora-arm] [F15 PATCH 0/6] ARM: Add support for pata_imx (for Genesi Smarttop)

[Dennis Gilmore]

El Wed, 28 Dec 2011 17:54:25 +0000
Niels de Vos <devos at fedoraproject.org> escribió:
> Hi there!
> 
> This patchset contains only cherry-picked patches from Linus' current
> tree. Without these patches, the Genesi Smarttop does not recognize
> the onboard SSD-chip. The required driver (pata_imx) is already
> included in the ARM verion of the kernel, only the bindings with the
> board are missing.
> 
> Instead of sending all patches in separate emails, I'm attaching them
> numbered and all for easy inclusion in the F15 kernel. I have done
> local testing and can happily report that the 2.6.41.6-1 kernel can
> use the onboard SSD when appying these patches.
> 
> I (and other Fedora ARM owners of a Smarttop) appreciate it if these
> patches can be included in a next release. Many thanks,
> Niels
> 
> ---
> Arnaud Patard (4):
>   imx51: add pata device
>   imx51: add pata clock
>   imx: efika: Enable pata.
>   Fix pata imx resource
> 
> Fabio Estevam (1):
>   ARM: imx: Add PATA resources for other i.MX processors
> 
> Uwe Kleine-König (1):
>   ARM: mx5: fix remaining inconsistent names for irqs
> 
>  arch/arm/mach-mx5/Kconfig                       |    1 +
>  arch/arm/mach-mx5/clock-mx51-mx53.c             |    7 +-
>  arch/arm/mach-mx5/devices-imx51.h               |    4 +
>  arch/arm/mach-mx5/devices.c                     |   10 +-
>  arch/arm/mach-mx5/mm.c                          |    8 +-
>  arch/arm/mach-mx5/mx51_efika.c                  |    2 +
>  arch/arm/plat-mxc/devices/Kconfig               |    3 +
>  arch/arm/plat-mxc/devices/Makefile              |    1 +
>  arch/arm/plat-mxc/devices/platform-pata_imx.c   |   59 ++++++++
>  arch/arm/plat-mxc/include/mach/devices-common.h |    8 +
>  arch/arm/plat-mxc/include/mach/mx35.h           |    2 +-
>  arch/arm/plat-mxc/include/mach/mx51.h           |  162
> +++++++++++----------- 12 files changed, 175 insertions(+), 92
> deletions(-) create mode 100644
> arch/arm/plat-mxc/devices/platform-pata_imx.c
> 


Ill get them applied. Im looking to pull the frame buffer bits into the
kernel also so that the smarttop and smartbook will both work in f15
and up.

Dennis