[fedora-arm] ARM kernel moving forward 3.7+

Tue Dec 4 16:07:16 UTC 2012

On 12/01/2012 03:33 AM, Peter Robinson wrote:
> Hi Mark,
> 
> Would love feedback on the 3.7-rc7 unified kernel on Calxeda HW.
> 
> http://arm.koji.fedoraproject.org/koji/buildinfo?buildID=102860

I installed kernel, kernel-tools, kernel-tools-libs, and
kernel-modules-extra. The boot started, which was nice, and proceeded
through driver probing. When it came time to find the hard drive, though:

[    3.223097] uart-pl011 fff36000.serial: no DMA platform data
[    3.293171] loop: module loaded
[    3.304994] libphy: Fixed MDIO Bus: probed
[    3.312008] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    3.320476] usbcore: registered new interface driver usbserial
[    3.326778] usbcore: registered new interface driver usbserial_generic
[    3.334087] usbserial: USB Serial support registered for generic
[    3.343052] mousedev: PS/2 mouse device common for all mice
[    3.357270] rtc-pl031 fff35000.rtc: rtc core: registered pl031 as rtc0
[    3.372647] device-mapper: uevent: version 1.0.3
[    3.382934] device-mapper: ioctl: 4.23.0-ioctl (2012-07-25)
initialised: dm-devel at redhat.com
[    3.398526] cpuidle: using governor ladder
[    3.402673] cpuidle: using governor menu
[    3.415758] usbcore: registered new interface driver usbhid
[    3.421367] usbhid: USB HID core driver
[    3.427469] drop_monitor: Initializing network drop monitor service
[    3.436043] ip_tables: (C) 2000-2006 Netfilter Core Team
[    3.442094] TCP: cubic registered
[    3.445452] Initializing XFRM netlink socket
[    3.460771] NET: Registered protocol family 10
[    3.479839] mip6: Mobile IPv6
[    3.482861] NET: Registered protocol family 17
[    3.488783] Key type dns_resolver registered
[    3.493269] VFP support v0.3: implementor 41 architecture 3 part 30
variant 9 rev 4
[    3.501052] ThumbEE CPU extension supported.
[    3.505441] Registering SWP/SWPB emulation handler
[    3.516209] registered taskstats version 1
[    3.529645] rtc-pl031 fff35000.rtc: setting system clock to
2012-12-04 11:54:39 UTC (1354622079)
[    3.543436] md: Waiting for all devices to be available before autodetect
[    3.550225] md: If you don't use raid, use raid=noautodetect
[    3.568496] md: Autodetecting RAID arrays.
[    3.572649] md: Scanned 0 and added 0 devices.
[    3.577091] md: autorun ...
[    3.579884] md: ... autorun DONE.
[    3.584812] Waiting for root device LABEL=rootfs...

it should look more like:

[    1.623005] uart-pl011 fff36000.serial: no DMA platform data
[    1.631938] loop: module loaded
[    1.635406] libphy: Fixed MDIO Bus: probed
[    1.639553] calxedaxgmac fff50000.ethernet: (unregistered
net_device): h/w version is 0x1012
[    1.648391] calxedaxgmac fff51000.ethernet: (unregistered
net_device): h/w version is 0x1012
[    1.657395] usbcore: registered new interface driver usbserial
[    1.663251] usbcore: registered new interface driver usbserial_generic
[    1.669821] USB Serial support registered for generic
[    1.674876] usbserial: USB Serial Driver core
[    1.679340] mousedev: PS/2 mouse device common for all mice
[    1.685325] rtc-pl031 fff35000.rtc: rtc core: registered pl031 as rtc0
[    1.692205] device-mapper: uevent: version 1.0.3
[    1.697052] device-mapper: ioctl: 4.23.0-ioctl (2012-07-25)
initialised: dm-devel at redhat.com
[    1.705649] cpuidle: using governor ladder
[    1.709738] cpuidle: using governor menu
[    1.714062] usbcore: registered new interface driver usbhid
[    1.719626] usbhid: USB HID core driver
[    1.723508] drop_monitor: Initializing network drop monitor service
[    1.730050] ip_tables: (C) 2000-2006 Netfilter Core Team
[    1.735409] TCP: cubic registered
[    1.738719] Initializing XFRM netlink socket
[    1.743382] NET: Registered protocol family 10
[    1.748550] mip6: Mobile IPv6
[    1.751516] NET: Registered protocol family 17
[    1.756028] VFP support v0.3: implementor 41 architecture 3 part 30
variant 9 rev 4
[    1.763703] Registering SWP/SWPB emulation handler
[    1.768802] registered taskstats version 1
[    1.773058] rtc-pl031 fff35000.rtc: setting system clock to
2012-12-04 12:01:13 UTC (1354622473)
[    1.782285] Freeing init memory: 320K
[    1.941240] dracut: dracut-018-105.git20120927.fc17
[    2.079625] udevd[111]: starting version 182
[    2.181899] dracut: Starting plymouth daemon
Couldn't open /dev/ttyAMA0
[    2.398316] highbank-ahci ffe08000.sata: AHCI 0001.0300 32 slots 5
ports 3 Gbps 0x1e impl platform mode
[    2.407847] highbank-ahci ffe08000.sata: flags: ncq sntf stag pm led
clo only pmp pio slum part ccc apst
[    2.424401] scsi0 : highbank-ahci
[    2.428084] scsi1 : highbank-ahci
[    2.431659] scsi2 : highbank-ahci
[    2.435277] scsi3 : highbank-ahci
[    2.438951] scsi4 : highbank-ahci
[    2.442484] ata1: DUMMY
[    2.445003] ata2: SATA max UDMA/133 mmio [mem 0xffe08000-0xffe17fff]
port 0x180 irq 115
[    2.453010] ata3: SATA max UDMA/133 mmio [mem 0xffe08000-0xffe17fff]
port 0x200 irq 115
[    2.453019] ata4: SATA max UDMA/133 mmio [mem 0xffe08000-0xffe17fff]
port 0x280 irq 115
[    2.453024] ata5: SATA max UDMA/133 mmio [mem 0xffe08000-0xffe17fff]
port 0x300 irq 115
[    2.823574] ata2: SATA link down (SStatus 0 SControl 300)
[    3.203569] ata3: SATA link down (SStatus 0 SControl 300)
[    3.583568] ata4: SATA link down (SStatus 0 SControl 300)
[    4.163566] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    4.170203] ata5.00: ATA-9: SAMSUNG MZ7PC256HAFU-000DA, CXM02W1Q, max
UDMA/133
[    4.177437] ata5.00: 500118192 sectors, multi 16: LBA48 NCQ (depth 31/32)
[    4.184462] ata5.00: configured for UDMA/133
[    4.189048] scsi 4:0:0:0: Direct-Access     ATA      SAMSUNG MZ7PC256
CXM0 PQ: 0 ANSI: 5
[    4.197630] sd 4:0:0:0: [sda] 500118192 512-byte logical blocks: (256
GB/238 GiB)
[    4.197811] sd 4:0:0:0: Attached scsi generic sg0 type 0
[    4.210718] sd 4:0:0:0: [sda] Write Protect is off
[    4.215598] sd 4:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[    4.226073]  sda: sda1 sda2 sda3
[    4.230334] sd 4:0:0:0: [sda] Attached SCSI disk
[    4.393561] EXT4-fs (sda3): mounted filesystem with ordered data
mode. Opts: (null)
[    4.544693] dracut: Checking ext4: /dev/disk/by-label/rootfs
[    4.551032] dracut: issuing e2fsck -a  /dev/disk/by-label/rootfs
[    4.578903] dracut: rootfs: clean, 239103/15343616 files,
2623899/61362432 blocks
[    4.588056] dracut: Remounting /dev/disk/by-label/rootfs with -o ro
[    4.655227] EXT4-fs (sda3): mounted filesystem with ordered data
mode. Opts: (null)
[    4.674612] dracut: Mounted root filesystem /dev/sda3
[    4.802756] dracut: Switching root
[    5.694246] SELinux:  Permission wake_alarm in class capability2 not
defined in policy.
[    5.702251] SELinux:  Permission block_suspend in class capability2
not defined in policy.
[    5.710535] SELinux: the above unknown classes and permissions will
be allowed
[    5.869337] type=1403 audit(1354622477.590:2): policy loaded
auid=4294967295 ses=4294967295
[    5.895568] systemd[1]: Successfully loaded SELinux policy in 1s 16ms
129us.
[    6.215633] systemd[1]: Relabelled /dev and /run in 171ms 604us.
[    6.643830] systemd[1]: systemd 44 running in system mode. (+PAM
+LIBWRAP +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP; fedora)

Welcome to Fedora 17 (Beefy Miracle)!
[    6.659136] systemd[1]: Set hostname to <highbank-f17-hfp>.

It looks like the modules aren't being loaded. Suggested as to what I'm
doing wrong?

--Mark Langsdorf
Calxeda, Inc.