[fedora-arm] F19 install on mirabox

[Jared K. Smith]

On Sun, Jul 21, 2013 at 9:01 AM, Jochen De Smet <jochen.arm at leahnim.org>wrote:

>
> What's the output you get from "usb start" ? Should be someting like
>
> Marvell>> usb start
> (Re)start USB...
> USB:   Active port:     invalid port number 2, switching to port 0
> Register 10011 NbrPorts 1
> USB EHCI 1.00
> scanning bus for devices... 4 USB Device(s) found
> Waiting for storage device(s) to settle before scanning...
>        scanning bus for storage devices... Device NOT ready
>    Request Sense returned 02 3A 00
> 2 Storage Device(s) found
> Marvell>>
>

That's exactly what I was getting.


> Does it see your sd card as device 1? i.e.
>
> Marvell>> usb storage
>   Device 0: Vendor: Generic  Rev: 9451 Prod: STORAGE DEVICE
>             Type: Removable Hard Disk
>             Capacity: not available
>   Device 1: Vendor: Generic  Rev: 9451 Prod: STORAGE DEVICE
>             Type: Removable Hard Disk
>             Capacity: 15407.0 MB = 15.0 GB (31553536 x 512)
>

No, the Mirabox wasn't seeing the card for some reason.  I've tried again
with another SD card, and it's seeing this one, so I'm able to get a bit
further.  I can now get the kernel to boot, but it hangs almost immediately
after the line that says "[  OK  ] Found device /dev/ttyS0."  For what it's
worth, this is the same place my OpenBlocks AX3 is hanging as well -- so
I'm wondering if this is a problem across all the Armada-XP systems.

Anybody have any other ideas on how to work around this problem?

--
Jared Smith
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.fedoraproject.org/pipermail/arm/attachments/20130721/b81e1f92/attachment-0001.html>