[fedora-arm] Fedora 21 Allwinner A10 Booting?

[Robert Brown]

On 15/12/14 16:32, Peter Robinson wrote:
> On Mon, Dec 15, 2014 at 5:24 AM, Robert Brown <rebrown at exemail.com.au> wrote:
>> Thanks for the reply Peter.
>>
>> On 15/12/14 15:58, Peter Robinson wrote:
>>> On Mon, Dec 15, 2014 at 4:52 AM, Robert Brown <rebrown at exemail.com.au>
>>> wrote:
>>>> Found several log files with date 01/01/1970 (attached).
>>>>
>>>> /var/log/chrony  was empty.
>>> Would be until network comes up and chrony can start
>>>
>>>> Messages log reports:
>>>> EXYNOS: PMU not supported    and
>>>> edma-dma-engine edma-dma-engine.0: Can't allocate PaRAM dummy slot
>>>> edma-dma-engine: probe of edma-dma-engine.0 failed with error -22
>>> All spurious, for HW other than AllWinner
>>>
>>>> fairly early on. And
>>>>
>>>> ahci-sunxi 1c18000.sata: PHY power up failed.
>>>> ahci-sunxi: probe of 1c18000.sata failed with error -5
>>> Do you have a SATA device attached?
>> No sata device attached.
>>>
>>>> Generated key 1
>>>> Fatal error : getpwnam(chrony) failed
>>>> getpwnam(chrony) failed
>>>>
>>>> A search found all of these were empty:
>>>>
>>>> /media/rbrown/__/etc/systemd/user
>>>> /media/rbrown/__/etc/xdg/systemd/user
>>>> /media/rbrown/__/var/kerberos/krb5/user
>>>> /media/rbrown/__/usr/share/perl5/User
>>>> /media/rbrown/__/usr/lib/systemd/user
>>>> /media/rbrown/__/run/user
>>>>
>>>> First things to check for?
>>> Maybe I missed in it earlier posts but what A10 device are you using?
>> This is a Rikomagic MK802II hdmi device. Trying to boot headless with no
>> serial console!
> What uboot are you using, are you specifying a .dtb file, if so what one?
>
> Peter
I have applied /usr/share/uboot/Mele_A1000/u-boot-sunxi-with-spl.bin 
using dd. This Mele device has shown a very high compatibility 
previously with the MK802II. Other u-boot options that I could try might 
be Cubieboard (1) and maybe A10-OLinuXino-Lime but less sure of this 
last one.
Is my understanding correct that this step would have applied 
sun4i-a10-a1000.dtb or have I missed a step?

Rob
>