[fedora-arm] Update Fedora 20 on Beaglebone Black

[Dr. Peter G. Baum]

Many, thanks Gordan,
I get an error (see below), but it seems to work nevertheless.

Could you please explain what the problem was?

Peter

   Installing  : kernel-lpae-3.13.5-202.fc20.armv7hl 
 
                                                                 1/2
   Installing  : kernel-3.13.5-202.fc20.armv7hl 
 
                                                                 2/2 
dracut-install: ERROR: installing 'sgdisk'
/usr/lib/dracut/dracut-install -D /var/tmp/initramfs.Nqxt78 -a sgdisk
Image Name:   3.13.5-202.fc20.armv7hl+lpae
Created:      Sat Mar  8 20:46:44 2014
Image Type:   ARM Linux Kernel Image (uncompressed)
Data Size:    4482088 Bytes = 4377.04 kB = 4.27 MB
Load Address: 00008000
Entry Point:  00008000
Image Name:   initramfs
Created:      Sat Mar  8 20:46:49 2014
Image Type:   ARM Linux RAMDisk Image (uncompressed)
Data Size:    10405595 Bytes = 10161.71 kB = 9.92 MB
Load Address: 00000000
Entry Point:  00000000
dracut-install: ERROR: installing 'sgdisk'
/usr/lib/dracut/dracut-install -D /var/tmp/initramfs.1gEm5d -a sgdisk
Image Name:   3.13.5-202.fc20.armv7hl
Created:      Sat Mar  8 20:51:29 2014
Image Type:   ARM Linux Kernel Image (uncompressed)
Data Size:    5174832 Bytes = 5053.55 kB = 4.94 MB
Load Address: 00008000
Entry Point:  00008000
Image Name:   initramfs
Created:      Sat Mar  8 20:51:32 2014
Image Type:   ARM Linux RAMDisk Image (uncompressed)
Data Size:    10570836 Bytes = 10323.08 kB = 10.08 MB
Load Address: 00000000
Entry Point:  00000000
   Verifying   : kernel-3.13.5-202.fc20.armv7hl 
 
                                                                 1/2
   Verifying   : kernel-lpae-3.13.5-202.fc20.armv7hl 
 
                                                                 2/2
Installed:
   kernel.armv7hl 3.13.5-202.fc20 
                                  kernel-lpae.armv7hl 3.13.5-202.fc20 


Complete!



On 03/08/2014 07:56 PM, Gordan Bobic wrote:
> Does it work if you:
>
> rpm -e prelink
>
> ?
>
> On 03/08/2014 06:27 PM, Dr. Peter G. Baum wrote:
>> Hi,
>>
>> I tried to run "dnf update" Fedora 20 on the Beaglebone Black,
>> but I got the following error message:
>>
>> dracut-install: ERROR: installing 'sgdisk'
>> /usr/lib/dracut/dracut-install -D /var/tmp/initramfs.NHzynE -a sgdisk
>> /usr/sbin/prelink: /usr/lib/libc-2.18.so: Unknown arm relocation type 160
>> Image Name:   3.13.5-202.fc20.armv7hl
>> Created:      Sat Mar  8 18:41:30 2014
>> Image Type:   ARM Linux Kernel Image (uncompressed)
>> Data Size:    5174832 Bytes = 5053.55 kB = 4.94 MB
>> Load Address: 00008000
>> Entry Point:  00008000
>> Image Name:   initramfs
>> Created:      Sat Mar  8 18:41:42 2014
>> Image Type:   ARM Linux RAMDisk Image (uncompressed)
>> Data Size:    10570910 Bytes = 10323.15 kB = 10.08 MB
>> Load Address: 00000000
>> Entry Point:  00000000
>>
>> dracut-install: ERROR: installing 'sgdisk'
>> /usr/lib/dracut/dracut-install -D /var/tmp/initramfs.kATy3B -a sgdisk
>> /usr/sbin/prelink: /usr/lib/libc-2.18.so: Unknown arm relocation type 160
>> Image Name:   3.13.5-202.fc20.armv7hl+lpae
>> Created:      Sat Mar  8 18:45:43 2014
>> Image Type:   ARM Linux Kernel Image (uncompressed)
>> Data Size:    4482088 Bytes = 4377.04 kB = 4.27 MB
>> Load Address: 00008000
>> Entry Point:  00008000
>> Image Name:   initramfs
>> Created:      Sat Mar  8 18:45:47 2014
>> Image Type:   ARM Linux RAMDisk Image (uncompressed)
>> Data Size:    10405695 Bytes = 10161.81 kB = 9.92 MB
>> Load Address: 00000000
>> Entry Point:  00000000
>>    Verifying   : kernel-3.13.5-202.fc20.armv7hl
>>                                                                1/186
>>
>> I found also this bug entry,
>> https://bugzilla.redhat.com/show_bug.cgi?id=1043033
>> which seems to be similar.
>>
>> Any solution or workaround for that?
>>
>> Many thanks,
>>
>> Peter
>> _______________________________________________
>> arm mailing list
>> arm at lists.fedoraproject.org
>> https://admin.fedoraproject.org/mailman/listinfo/arm
>
>